NEC T30A, T60A User Manual
T30A / T60A Tape Library
-This User's Guide provides information to use the unit safely and correctly and to avoid a
personal injury and/or a damage to the customer's properties. Thoroughly read this manual to
fully understand handling of the unit.
-Keep this User's Guide with the unit to see whenever it is necessary.
-Make sure to provide this User's Guide along with the unit to a third party.
NF6303 / NF6306
User’s Guide
Rev.1
＜T30A＞ ＜T60A＞
856-129409-460-A
Handling of laser product
When the Fibre Chanel drive is installed, class 1 laser product is used in this product.
1 Klassenlaserprodukt wird zu der Zeit des Einsatzes von einem Fibre Chanel-Antrieb mit diesem Produkt
benutzt.
Japanese acceptance statement
Chinese acceptance statement
Taiwan acceptance statement
WEEE
Disposing of your used NEC product
In the European Union
EU-wide legislation as implemented in each Member State requires that used
electrical and electronic products carrying the mark (left) must be disposed of
separately from normal household waste. This includes tape library or electrical
components, such as tape drive, AC power supply.
When you dispose of such products, please follow the guidance of your local
authority or ask the shop where you purchased the product, or if applicable,
follow applicable legislation or agreement you may have.The mark on electrical
and electronic products may only apply to the current Europian Union Menber
States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the
European Union, please contact your local authority and ask for the correct
method of disposal.
－i－
FCC acceptance statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
ICES acceptance statement
Industry Canada Class A Emission Compliance Statement/Avis de conformité à la réglementation
d`Industrie Canada:
CAN ICES-3(A) / NMB-3(A)
Other
Under the EN ISO 7779 standard, the maximum noise level is 70 decibels.
RoHS Compliance
This product complies with the EU's "Restriction of the use of certain hazardous substances in
electrical and electronic equipment" (RoHS).
Türkiye Cumhuriyeti:EEE Yönetmeliğine Uygundur
Complying with “CIRCULAR, No.30/2011/TT-BCT(Hanoi, August 10 2011), Temporary regulations
on content limit for certain hazardous substances in electrical products”
－ii－
Safety Precautions
Indicates the presence of a hazard that may result in death or serious
personal injury if the instruction is ignored.
Indicates the presence of a hazard that may cause minor personal injury,
including burns, or property damage if the instruction is ignored.
SYMBOL
MEAN
This symbol indicates the presence of a hazard if the instruction is ignored. An image in
the symbol illustrates the hazard type. (Attention)
This symbol indicates prohibited actions. An image in the symbol illustrates a particular
prohibited action. (Prohibited Action)
This symbol indicates mandatory actions. An image in the symbol illustrates a mandatory
action to avoid a particular hazard. (Mandatory Action)
Before use, In order to use the product safely and correctly, be sure to read over this book, please handle it
properly.
This product has been designed with sufficient safety. In case of improper use of this product, the operator
may be injured and damage to property may result. After reading this manual, store it for future reference if
necessary.
Follow the instructions in this Guide for your safety to use the product.
The product contains components with possible danger, hazards that may cause by ignoring warnings, and
preventive actions against such hazards.
This product contains components with potential hazards, which are marked with a warning label placed on
or arount those components
In this Guide or warning labels, "WARNING" or "CAUTION" is used to indicate a degree of danger. These
terms are defined as follows:
Precautions and notices against hazards are presented with one of the following three symbols. The
individual symbols are defined as follows:
－iii－
Disconnect the power cord(s) before installing or removing the product.
Make sure to power off the product and disconnect the power cord(s) from a power outlet
before installing/removing the server. All voltage is removed only when the power cords
are unplugged.
Indicates that improper use may
cause an electric shock.
Indicates that improper use may
cause fingers to be caught.
Indicates that improper use may
cause personal injury.
Indicates that improper use may
cause personal injury.
Indicates that improper use may
cause explosion or burst.
Indicates that improper use may
cause fingers or hands to be
caught.
Indicates that improper use may
cause fumes or fire.
Indicates that improper use may
cause eye damage.
Do not disassemble, repair, or
modify the server. Otherwise, an
electric shock or a fire may be
caused.
Do not touch the server
components with wet hand.
Otherwise, an electric shock may
be caused.
Do not touch any other component
than specified. Otherwise, an
electric shock or burn may be
caused.
Keep water or liquid away from
the server. Otherwise, an electric
shock or a fire may be caused.
Do not place the server near a fire.
Otherwise, a fire may be caused.
Indicates a general prohibited
action that cannot be specifically
identified.
Unplug the power cord of the
server. Otherwise, an electric shock
or a fire may be caused.
Indicates a mandatory action that
cannot be specifically identified.
Make sure to follow the
instruction.
Be sure to provide earthing.
Otherwise, an electric shock or a
fire may be caused.
Symbol indicating a prohibited
action (may not always be
indicated)
Description of a danger
Symbol to draw attention
Term indicating a degree of danger
(Example)
Attentions
Prohibited Actions
Mandatory Action
－iv－
Do not use the product for services related to human lives or requiring high
reliability.
Your product is not intended to be used with or control facilities or devices concerning
human lives, including medical devices, nuclear facilities and devices, aeronautics and
space devices, transportation facilities and devices; and facilities and devices requiring
high reliability. NEC assumes no liability for any accident resulting in personal injury,
death, or property damage if the product has been used in the above conditions.
Do not use the product if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the product and disconnect the
power plug from the outlet, then contact your service representative. Using the product in
such conditions may cause a fire.
Keep needles or metal objects away from the product.
Keep needles or metal objects away from the product.
Do not insert needles or metal objects into ventilation holes or gaps in the product. Doing
so may cause an electric shock.
Do not use the product in any unapproved place.
Install the product on a standard EIA 19-inch rack assembly. Do not install the rack
containing the product in a place inappropriate to the rack installation environment. Failure
to follow these instructions may cause some bad influences to be imposed on the product
and other systems installed on the rack and also a fire or personal injury due to falling of
the rack may occur. For the detailed explanation on the place where the server should be
installed and the earthquake-resistant construction for the rack, refer to the manual attached
to the rack or contact you service representative.
Always install the product on a rack conforming to the relevant standard.
Install the product on a rack confirming to the EIA standard for the Server/Storage to be
used. Do not use the product installed on a rack that is not comply with EIA standard or
without mounting it on a proper rack. Failure to follow these instructions may cause the
server to operate incorrectly and/or personal injury or damages of surrounding devices to
occur. Contact your service representative for the racks available for the product.
Keep water or foreign matter away from the product.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper clips) enter
the server. Failure to follow this warning may cause an electric shock, a fire, or a failure of
the server. When such things accidentally enter the server, immediately turn off the power
and disconnect the power plug from the outlet. Do not disassemble the product. Contact
your service representative.
General
－v－
Do not overload the supply circuit by connecting this equipment with other
equipment so that the total exceeds the outlet rating.
To prevent fires, wiring and device damage, the total power drawn by the equipment in
the rack shall not exceed the rating of the branch circuit. Contact your electric constructor
or the local power company for the requirements on the wiring and installation of electric
facilities.
Do not carry or install the product only by a single person.
More than one person is required to carry or install the rack. Failure to follow this
instruction may cause the rack to fall to result in personal injury and/or breakages of
surrounding devices. In particular, a high rack (such as 44U rack) is unstable if it is not
fixed by stabilizers. More than one person is required to hold the rack to carry and install
the product.
Do not install the product so that the load may be concentrated on a specific
point.
Install stabilizers on the rack or connect more than one rack with each other to distribute
the load to avoid the weight is concentrated on one spot. Failure to follow this instruction
may cause the rack to fall to result in personal injury.
Do not install components on the product only by a single person.
More than one person is required to install parts including the doors and trays for the rack.
Failure to follow this instruction may cause some parts to fall to be broken and/or to result
in personal injury.
Anchor the equipment rack.
The equipment rack must be anchored (putting stabilizers or providing seismic protection)
to an unmovable support to prevent it from falling over when the product is removed from
the rack. The anchors must be able to withstand a force of up to 113kg (250lbs.) You must
also consider the weight of any other device installed in the rack.
Do not pull more than one device out of the rack at the same time.
Pulling out more than one device from the rack may cause the rack to be fallen. Only pull
out a single device from the rack at a time.
Rack
－vi－
Elevated Operating Ambient．
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of
the rack environment may be greater than room ambient. Therefore, consideration
should be given to installing the equipment in an environment compatible with the
maximum ambient temperature (Tma) specified by the manufacturer.
Reduced Air Flow．
Installation of the equipment in a rack should be such that the amount of air flow required
for safe operation of the equipment is not compromised.
Reliable Earthing．
Reliable earthing of rack-mounted equipment should be maintained. Particular attention
should be given to supply connections other than direct connections to the branch circuit
(e.g. use of power strips).
－vii－
Do not hold the power plug with a wet hand.
Do not disconnect/connect the plug while your hands are wet. Failure to follow this
warning may cause an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe. Failure to follow this warning may cause a
gas explosion.
If you disconnect the power, disconnect the two power lines.
The product might be powered from 2 AC power lines. If you disconnect the power from
the device, both 2 power sources must be disconnected. It may cause an electric shock if
the power is not disconnected properly.
Plug in to a proper power source.
Use a proper wall outlet. Use of an improper power source may cause a fire or a power
leak. Do not install the product where you need an extension cord. Use of a cord that does
not meet the power specifications of the product may heat up the cord and cause a fire.
Do not connect the power cord to an outlet that has an illegal number of
connections.
The electric current exceeding the rated flow overheats the outlet, which may cause a fire.
Insert the power plug into the outlet as far as it goes.
Heat generation resulting from a halfway inserted power plug (imperfect contact) may
cause a fire. Heat will also be generated if condensation is formed on dusty blades of the
halfway inserted plug, increasing the possibility of fire.
Do not use the attached power cord for any other devices or usage.
The power cord that comes with your product is designed aiming to connect with this
product and to use with the product, and its safety has been tested. Do not use the attached
power cord for any other purpose. Doing so may cause a fire or an electric shock.
Power Supply and Power Cord Use
－viii－
Use the authorized power cord only.
Use only the power cord that comes with your product. Use of an unauthorized power
cord may cause a fire when the electric current exceeds the rated flow. Also, observe the
following to prevent an electric shock or a fire caused by a damaged cord.
・Do not stretch the cord harness.
・Do not pinch the power cord.
・Do not bend the power cord.
・Keep chemicals away from the power cord.
・Do not twist the power cord.
・Do not place any object on the power cord.
・Do not step on the power cord.
・Do not alter, modify, or repair the power cord.
・Do not bundle the power cords.
・Do not secure the power cord with staples or equivalents.
・Do not use any damaged power cord.
(Replace a damaged power cord with a new one of the same specifications. Ask your
service representative for replacement.)
－ix－
Do not use or store this product in corrosive environment.
Avoid the usage or storage of this product in an environment which may be exposed to
corrosive gases, such as those including but not limited to: sulfur dioxide, hydrogen
sulfide, nitrogen dioxide, chlorine, ammonia and/or ozone. Avoid installing this product
in a dusty environment or one that may be exposed to corrosive materials such as sodium
chloride and/or sulfur. Avoid installing this product in an environment which may have
excessive metal flakes or conductive particles in the air. Such environments may cause
corrosion or short circuits within this product, resulting in not only damage to this
product, but may even lead to be a fire hazard. If there are any concerns regarding the
environment at the planned site of installation or storage, please contact your sales agent．
Do not install the product in any place other than specified.
Do not install the product in the following places or any place other than specified in this
Guide. Failure to follow this instruction may cause a fire.
・a dusty place
・a humid place such as near a boiler
・a place exposed to direct sunlight
・an unstable place
Do not install the parts other than specified.
Do not install third-party products or options on the device. Operation is no longer
successful, and may cause fire or malfunction.
Do not block the intake and exhaust holes.
Do not block air intake holes at the front or back of the product. Internal temperature rises
may cause malfunction and doing so may cause a fire.
Do not use any unauthorized interface cable.
Use only interface cables provided by NEC and locate a proper device and connector
before connecting a cable. Using an unauthorized cable or connecting the product to an
improper destination may result in a fire by short circuit. Also, observe the following
notes on using and connecting an interface cable.
・Do not step on the cable.
・Do not place any object on the cable.
・Do not use the device with loose cable connections.
・Do not use any damaged cable connector.
・Lock the cable certainly by the attachments such as screws.
Treat SAS cables with care and respect.
Rough treatment of SAS cables could cause deterioration of characteristics or mechanical
damage (line disconnection).
・Ensure a minimum bending radius of 150mm.
・Make sufficient allowance for the cable forming.
・Do not forcibly stretch a cable or otherwise stress it.
Installation, Relocation, Storage, and Connection
－x－
Treat optical fiber cables with care and respect.
Rough treatment of optical fiber cables could cause deterioration of characteristics or
mechanical damage (line disconnection).
・Ensure a minimum bending radius of 38mm.
・Do not drop a cable on the floor or otherwise shock it.
・If not connecting a cable, place caps on it. When connecting a cable, do not discard the
caps but save them (as well as those for connectors on the unit).
As the optical power is attenuated by dust or dirt and it may cause data error, be sure to
clean the optical connector using the following procedure when optical fibre cable is
inserted to the product:
1. Spray air or another parts cleaning gas on the optical connector for several seconds.
2. Wipe the optical connector lightly several times with a non-fibrous cloth wetted with
isopropyl alcohol.
3. Spray parts cleaning gas on the optical connector for several seconds again.
Be careful when handling the laser products.
The product contains class-1 laser products based on JIS C6802, EN60825-1 (+A-11), and
21 CFR 1040.10 and 1040.11 issued by the U.S. Food and Drug Association (FDA).
Do not look straight at the optical fiber cable, optical fiber connector, or laser transceiver
module because there is a risk of eye damage, depending on the laser power level.
Note that JIS C6802, EN60825, and IEC60825 defines class-1 laser as the level of laser
which causes no injury if human is exposed to it.
Prevent damage from electrostatic discharge.
Components in the device is sensitive to static electricity. Even a slight discharge, could
damage the electrical components in the device. Even if a component receives damage, an
error may not occur immediately, but the state is aggravated and is causing a
"intermittent" problem gradually.
Before touching the product, touch an unpainted metal surface. It is effective to use
commercially available anti-static wrist strap with a clip terminal.
・If the frame of the device is metal, touch the frame.
・Otherwise, touch the wall part of the product or a screw of the door frame.
・Stay as still as possible when touching the components inside the product to avoid
produce static electricity.
Do not pinch your finger with rails or other components.
Be careful sufficiently not to pinch or cut your fingers with the rails etc. when you
mount/unmount the product on the rack.
Do not apply any load on the device pulled out from the rack.
Do not apply any load on the device pulled out from the rack. Doing so bends the frame of
the device. Consequently, the device cannot be pushed back into the rack. Placing an
object on the device may also cause personal injury if the device drops.
Relocation of the product.
Consult with your service representative for relocation of the product.
Disposal of the product.
The product contains liquid crystal display (LCD). Consult with your service
representative before disposing of the product. Dispose of the unit according to the
ordinance of the local government.
－xi－
Do not disassemble, repair, or alter the product.
Never attempt to disassemble, repair, or alter the product on any occasion. Failure to
follow this instruction may cause an electric shock or fire as well as malfunctions of the
server.
Disconnect the power plug before cleaning the product.
Make sure to power off and disconnect the power plug from a power outlet before
cleaning product. Touching any internal components of the product with its power cord
connected to a power source may cause electric shock even if the product’s power is
offline. Disconnect the power plug from the outlet occasionally and clean the plug with a
dry cloth. Heat will be generated if condensation is formed on a dusty plug, which may
cause a fire.
Avoid installation in extreme temperature conditions.
Immediately after the device is powered off, its internal components are very hot. Please
work after confirming the product was cooled enough.
Make sure to complete installation.
Install power cords and interface cables surely.
Improper installation of the cords and cables may cause a contact failure, resulting in
smoking or fire.
Handling of damaged LCD (liquid crystal display)
The product uses the liquid crystal display that contains harmful liquid to the human body.
If you need to touch the damaged LCD, take extreme care not to touch the liquid inside
the display. If the liquid enters your mouth, immediately gargle and consult with your
doctor. If the liquid adheres your skin or eyes, rinse it for at least 15 minutes, and then
consult with your doctor.
Ask your service representative for repair of the LCD.
Cleaning and Working with Internal Devices
－xii－
Do not use the product if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the product and disconnect the
power plug from the outlet, then contact your service representative. Using the product in
such conditions may cause a fire.
Do not put hand inside the device.
Do not put your hand inside the device. There is a possibility of injury by pinching your
hands with the internal components..
Stay away from the fan.
Keep your hand or hair away from the cooling fan on the rear of the product. Failure to
follow this warning may get your hand or hair caught in the fan, resulting in injury.
Avoid contact with the product during thunderstorms.
If it starts thundering before you disconnect the power plug, do not touch any part of the
product including the cables. Failure to follow this warning may cause an electric shock
by the thunderbolt.
Do not peep into device when magazine operations.
The part of the magazine has a mechanism to automatically open.
If you are peeping into the device during magazine operations, it may be injured part of
the magazine hit the face.
Do not put the finger in the opening of the magazine while operating the I/O
station.
The I/O station dashes out to a device front side after pressing the enter button. Please
there must not be danger from which the hand is placed between the moving part, and do
not affix the hand to the magazine, and do not put the finger in the opening of the
magazine until the I/O station dashes out. Please push the magazine a little when the
finger is placed in the opening of the magazine by any chance and pull out the finger
while returning it.
Keep any animal (Pet) away from the product.
Keep any animal (Pet) away from the product. Pet’s discharges or fur may enter the
device and cause a fire or electric shock.
To avoid incommoding reflections at visual display workplaces this device must
not be placed in the direct field of view.
This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be
placed in the direct field of view.
During Operation
－xiii－
Warning Label
Meaning / Location
T30A
T60A
[Do not disassemble]
Only the maintenance
Personnelcan disassemble
the unit.
[Heavy load]
To avoid personal injury, at
least three persons must
carry the unit.
[Do not put the thing on]
Do not put the thing on the
device.
[Do not put on length.]
Do not put the device on
length.
Location: Top plate of the
unit
T60A
[Redundant power supply
use]
Location: back of device
T30A/T60A
[Attention that rolls hand and
finger]
Location:Drive
Warning Labels
The following warning labels have been attached to this unit. Customers and maintenance service personnel
are urged to keep these warnings in the forefront of their minds when operating this unit. (Do not remove or
soil these labels.)
If any of these labels are missing, removed, soiled, or otherwise unreadable, contact your local maintenance
service company.
－xiv－
Kind of display
Kind
Content
It explains the content for which attention is especially necessary in
operating.
It explains information on the limitations in the operation.
It explains amplification of the text.
The mark of this manual
The following signs are used in this manual.
－xv－
Contents
Handling of laser product .................................................................................................... i
Japanese acceptance statement ............................................................................................. i
Chinese acceptance statement .............................................................................................. i
Taiwan acceptance statement ............................................................................................... i
WEEE ................................................................................................................................ i
FCC acceptance statement .................................................................................................. ii
ICES acceptance statement ................................................................................................. ii
Other ................................................................................................................................ ii
RoHS Compliance ............................................................................................................. ii
Warning Labels ............................................................................................................... xiv
The mark of this manual ................................................................................................... xv
Contents ....................................................................................................................................... xvi
Figures ........................................................................................................................... xxi
Tables .......................................................................................................................... xxiii
Preface ....................................................................................................................................... xxiv
Remarks ....................................................................................................................... xxiv
Exemptions ................................................................................................................... xxv
Use Limitation ............................................................................................................... xxv
Chapter1 General Description ...................................................................................................... 1
1.1 Handling Precautions ................................................................................................................. 1
1.1.1 Notes on Use ....................................................................................................................... 1
1.2 Transfer of Library ..................................................................................................................... 1
1.3 Names and Features of Components ............................................................................................ 2
1.3.1 Front View .......................................................................................................................... 2
1.3.2 Operator panel ..................................................................................................................... 3
1.3.2.1 Status LED .................................................................................................................... 3
1.3.2.2 LCD .............................................................................................................................. 4
1.3.2.3 Button ........................................................................................................................... 4
1.3.3 Magazine operation panel ..................................................................................................... 5
1.3.3.1 Magazine Status LED ..................................................................................................... 5
1.3.3.2 Button ........................................................................................................................... 5
1.3.3.3 Ethernet connector for maintenance ................................................................................. 6
1.3.4 Magazine ............................................................................................................................ 7
1.3.4.1 Slot number ................................................................................................................... 7
1.3.4.2 Active Slot ..................................................................................................................... 8
1.3.4.3 I/O station ...................................................................................................................... 8
1.3.4.4 Escape slot ..................................................................................................................... 8
1.3.4.5 Cleaning Slot ................................................................................................................. 8
1.3.4.6 Inactive slot ................................................................................................................... 8
1.3.5 Rear View ........................................................................................................................... 9
1.3.6 Drive Sled Ingicator ........................................................................................................... 10
1.3.7 Power Module LED ............................................................................................................ 11
1.4 Encryption ............................................................................................................................... 12
1.5 Disposal of the Product and Comsumables ................................................................................. 13
1.6 Unpacking ............................................................................................................................... 14
1.6.1 Unpacking ........................................................................................................................ 14
1.7 Installing the Rack Mounting Kit .............................................................................................. 16
1.7.1 Components ...................................................................................................................... 16
1.7.2 Caution points for rack mounting ........................................................................................ 17
1.7.3 Rack mount rail attachment position ................................................................................... 19
1.7.4 Attachment of Rack mount rail L/R..................................................................................... 20
1.7.5 Attachment of Rack mount bracket L/R ............................................................................... 21
1.7.6 Installation of library ......................................................................................................... 22
1.7.7 Attachment of Rack ear ...................................................................................................... 24
－xvi－
1.7.8 Attachment of label plate.................................................................................................... 25
1.8 Removal of shipment Stabilizer ................................................................................................. 26
Chapter2 Setup ......................................................................................................................... 27
2.1 Connection of a Interface Cable ................................................................................................ 27
2.1.1 Connection of SAS Cable ................................................................................................... 27
2.1.2 Connection of FC Cable ..................................................................................................... 28
2.2 Connection of AC Power Cable ................................................................................................ 29
2.3 Power-On and self test.............................................................................................................. 29
2.4 Setting Drive configuration ....................................................................................................... 29
2.5 Setting Library and Drive configuration ..................................................................................... 29
2.6 Diagnostic Test ........................................................................................................................ 30
2.7 Operation Checks after Installation ............................................................................................ 30
Chapter3 Power-On and Power-Off ............................................................................................ 31
3.1 Power-On and Power-On Sequence ........................................................................................... 31
3.2 Starting the System .................................................................................................................. 31
3.3 Shutting Down the System ........................................................................................................ 31
3.4 Power-Off and Power-Off Sequence .......................................................................................... 31
Chapter4 Operator Panel ........................................................................................................... 32
4.1 Panel Indications ...................................................................................................................... 32
4.1.1 Menu Screen ..................................................................................................................... 32
4.1.2 Status Display screen ......................................................................................................... 33
4.1.2.1 Library State ................................................................................................................ 33
4.1.2.2 Drive State ................................................................................................................... 37
4.1.3 Asynchronization message screen ....................................................................................... 39
4.2 Menu Tree ............................................................................................................................... 40
4.3 Login ...................................................................................................................................... 44
4.3.1 Service Login .................................................................................................................... 45
4.4 Top Menu ................................................................................................................................ 46
4.4.1 Commands ........................................................................................................................ 47
4.4.2 Configuration .................................................................................................................... 48
4.4.2.1 Library Settings ............................................................................................................ 49
4.4.2.2 Network Settings .......................................................................................................... 50
4.4.2.3 Drive Settings .............................................................................................................. 51
4.4.2.4 OP Panel Settings ......................................................................................................... 52
4.4.2.5 Date / Time .................................................................................................................. 52
4.4.2.6 Set Default ................................................................................................................... 52
4.4.3 Current Information ........................................................................................................... 53
4.4.3.1 Setting Information ....................................................................................................... 53
4.4.3.2 Slot Information ........................................................................................................... 53
4.4.4 Service .............................................................................................................................. 54
4.4.4.1 View Error Status ......................................................................................................... 54
4.4.4.2 Diagnostics .................................................................................................................. 54
4.4.4.3 Statistics ...................................................................................................................... 55
4.4.4.4 Telnet Service Port ....................................................................................................... 55
4.4.4.5 View Revision ............................................................................................................. 55
4.4.4.6 Drive Replacement ....................................................................................................... 55
4.4.4.7 Advanced Service ......................................................................................................... 56
4.4.4.8 Library Log ................................................................................................................. 56
4.4.5 Logout .............................................................................................................................. 56
4.5 Configuring the Library ............................................................................................................ 57
4.5.1 Viewing Configuration data of the library ............................................................................ 57
4.5.2 Change password ............................................................................................................... 57
4.5.3 Setting of Drive ................................................................................................................. 59
4.5.3.1 Setting of Serial Attached SCSI ..................................................................................... 59
4.5.3.2 Setting of Fibre Channel ............................................................................................... 60
4.5.3.3 Setting robot control path .............................................................................................. 61
4.5.3.4 Power Save Mode ........................................................................................................ 62
4.5.4 Switching between ONLINE and OFFLINE ........................................................................ 62
4.5.5 Setting of I/O Station ......................................................................................................... 63
－xvii－
4.5.6 Setting of Active Slot ......................................................................................................... 63
4.6 Insertion and Removing Cartridge by Operator Panel ................................................................. 64
4.6.1 Magazine Operations ......................................................................................................... 64
4.6.1.1 Removing Magazine ..................................................................................................... 64
4.6.1.2 Insertion of cartridges into magazine .............................................................................. 66
4.6.1.3 Removal of cartridges from magazine ............................................................................ 66
4.6.1.4 Emergency removal of magazine ................................................................................... 67
4.6.2 I/O Station Operations ....................................................................................................... 68
4.7 Using the operation panel to move cartridges ............................................................................. 69
4.7.1 Load cartridge into drive .................................................................................................... 69
4.7.2 Removing from the drive.................................................................................................... 71
4.8 Cleaning .................................................................................................................................. 73
4.8.1 Cleaning by Operation panel .............................................................................................. 73
4.8.2 Auto Cleaning ................................................................................................................... 73
4.9 Rebooting the Library .............................................................................................................. 74
4.10 Rebooting Drive ..................................................................................................................... 75
Chapter5 Remote Manager Interface .......................................................................................... 76
5.1 Connection Configuration ......................................................................................................... 76
5.2 Connection Settings ................................................................................................................. 77
5.3 Startup of Remote Manager Interface ........................................................................................ 78
5.3.1 Connection of https ............................................................................................................ 79
5.4 Login Formats ......................................................................................................................... 80
5.5 Web Page Configuration ........................................................................................................... 81
5.6 Web Page Detail ...................................................................................................................... 82
5.6.1 Menu windows .................................................................................................................. 82
5.6.2 Login ................................................................................................................................ 83
5.6.3 Library information viewing menu(Monitor Sytem) ............................................................. 84
5.6.3.1 Library Basic Information(System Summary) ................................................................. 84
5.6.3.2 Library Detailed Information Window (Library Map) ..................................................... 86
5.6.4 Library management menu (Manage Library) ...................................................................... 93
5.6.4.1 Move Cartridge window (Move Cartridge) ..................................................................... 93
5.6.4.2 Unload Drive window (Unload Drive) ........................................................................... 95
5.6.4.3 Clean Drive window (Clean Drive) ................................................................................ 96
5.6.4.4 Library State (OFFLINE/ONLINE)switching window(Library State) ............................... 97
5.6.5 Library setting (Configure Library) ..................................................................................... 98
5.6.5.1 Account setting (User Access) ....................................................................................... 98
5.6.5.2 Physical View (Physical) ............................................................................................ 101
5.6.5.3 Library setup window (Logical)................................................................................... 102
5.6.5.4 Network setup window (Network) ............................................................................... 105
5.6.5.5 Date and Time setup window (Date and Time) ............................................................. 107
5.6.5.6 Event Notification setup window(SMTP) ..................................................................... 108
5.6.5.7 Event Notifications setup window (SNMP) .................................................................. 109
5.6.5.8 Encryption Basis ......................................................................................................... 112
5.6.5.9 Encryption Detail ........................................................................................................ 113
5.6.5.10 Licenses Registration ................................................................................................. 114
5.6.5.11 Saving the File Setting / Restore Screen (Save and Restore) .......................................... 115
5.6.6 Library maintenance (Service Library) ............................................................................... 117
5.6.6.1 View Library Logs ...................................................................................................... 117
5.6.6.2 Download Library /Drive logs (Download Logs) ........................................................... 118
5.6.6.3 Reset (Reset Library / Drive) ........................................................................................ 119
5.6.6.4 Firmware Refresh Screen (Firmware Update) ............................................................... 120
5.6.6.5 Statistical Information (Usage Statistics) ...................................................................... 121
5.6.6.6 Web Shell (web shell) ................................................................................................. 122
5.7 Event list ............................................................................................................................... 123
Chapter6 Encryption Key Management Function ...................................................................... 125
6.1 General Information ............................................................................................................... 125
6.1.1 Features of Encryption Key Management Option ............................................................... 125
6.1.2 Encryption Mechanism .................................................................................................... 125
6.1.3 Types of Keys ................................................................................................................. 125
－xviii－
6.1.3.1 Master Key ................................................................................................................ 126
6.1.3.2 Encryption Key .......................................................................................................... 127
6.1.3.3 Backup of encryption key ........................................................................................... 127
6.2 Basic Operation of encryption key management function .......................................................... 128
6.2.1 Setup .............................................................................................................................. 128
6.2.1.1 Registering the activation key ...................................................................................... 129
6.2.1.2 Checking the license key registration status .................................................................. 129
6.2.1.3 Enabling the encryption key management function ....................................................... 130
6.2.1.4 Registering (importing) the master key......................................................................... 131
6.2.1.5 Exporting (backing up) the master key ......................................................................... 133
6.2.2 Operation ........................................................................................................................ 134
6.2.2.1 To Create encrypted medium ....................................................................................... 134
6.2.3 Checking tape media Information ..................................................................................... 135
6.2.3.1 Sharing tape medium among multiple libraries ............................................................. 135
6.2.4 Maintenance .................................................................................................................... 135
6.2.4.1 Backup of Encryption Key (Basic Operation) ............................................................... 135
6.2.4.2 Executing Set Default ................................................................................................. 136
6.2.4.3 Checking the encryption log ........................................................................................ 136
6.3 Advance Operation of encryption key management function ..................................................... 137
6.3.1 Enabling or Disableing Enctyption for Each tape medium................................................... 138
6.3.1.1 Setting tape medium encryption................................................................................... 139
6.3.1.2 Sharing tape medium among multiple libraries (advanced) ............................................ 140
6.3.2 Importing and Exporting the Encryption Key(For Each Tape Medium) ................................ 140
6.3.2.1 When to import the encryption key .............................................................................. 141
6.3.2.2 To import the encryption key ...................................................................................... 141
6.3.2.3 To export an encryption key ........................................................................................ 143
6.3.3 Disabling the Encryption Management Function for the Library .......................................... 144
6.3.4 Changing the Master Key ................................................................................................. 145
6.3.5 Backing Up and Restoring the KEY Database .................................................................... 145
6.3.5.1 Backing up the KEY database ..................................................................................... 146
6.3.5.2 Restoring the KEY database ........................................................................................ 146
6.3.6 Clearing encryption information ....................................................................................... 147
6.3.6.1 To clear encryption information................................................................................... 147
6.4 Points to Check When a Failure or Abnormality Occurs ............................................................ 148
6.5 FAQ about Encryption Key Management function ................................................................... 149
6.6 List of Encryption Event Log Messages ................................................................................... 150
Chapter7 Installation of Option ................................................................................................ 151
7.1 Install of drive ....................................................................................................................... 151
7.2 Install of power module .......................................................................................................... 151
7.3 Install of activation key .......................................................................................................... 152
Chapter8 Cartridges ................................................................................................................ 152
8.1.1 Data Cartridge ................................................................................................................. 153
8.1.2 WORM cartridge ............................................................................................................. 153
8.1.3 Cleaning cartridge ........................................................................................................... 153
8.1.4 Diagnosis cartridge .......................................................................................................... 153
8.2 Cartridge Label ...................................................................................................................... 154
8.2.1 Attaching a cartridge label ................................................................................................ 155
8.3 Write Protection ..................................................................................................................... 156
8.4 Notes on Handling ................................................................................................................. 157
8.4.1 Notes on Use ................................................................................................................... 157
8.4.2 General ........................................................................................................................... 157
8.4.3 Use protection standard .................................................................................................... 157
8.4.4 Service Life ..................................................................................................................... 158
8.4.5 Cartridge storage ............................................................................................................. 158
Chapter9 Maintenance............................................................................................................. 159
9.1 Drive Cleaning ...................................................................................................................... 159
9.1.1 Auto Cleaning ................................................................................................................. 159
9.2 Diagnosis test ........................................................................................................................ 160
9.3 Cleaning of device ................................................................................................................. 160
－xix－
9.4 Cleaning of Magazine Filter .................................................................................................... 161
9.5 Cleaning of cartridge .............................................................................................................. 161
9.6 Updating the Firmware ........................................................................................................... 162
9.6.1 Confirming the Firmware Version ..................................................................................... 162
9.6.2 Updating the Library Firmware ......................................................................................... 163
9.6.3 Updating the Drive Firmware ........................................................................................... 164
9.7 Troubleshooting Procedures .................................................................................................... 165
9.8 Moving the Library ................................................................................................................ 166
Chapter10 Replacing Maintenance Parts ................................................................................... 167
10.1 Saving and Restoring Maintenance Information ...................................................................... 168
10.1.1 Saving Maintenance Information .................................................................................... 168
10.1.2 Restoring Maintenance Information ................................................................................ 169
10.2 Replacing the Device ............................................................................................................ 170
10.3 Replacing the Maintenance Chassis ....................................................................................... 170
10.4 Replacing the Contoller Board .............................................................................................. 171
10.5 Replacing the Drive Module ................................................................................................. 173
10.6 Replacing the Power Supply Module ..................................................................................... 174
10.7 Replacing the Operator Panel PKG ........................................................................................ 175
10.8 Replacing the Escape Slot ..................................................................................................... 177
10.9 Replacing the Front Magazine and Rear Magazine ................................................................. 177
10.10 Replacing the Air Filter ...................................................................................................... 178
10.11 Replacing the Drive fan ...................................................................................................... 181
10.12 Replacing the Internal FC cable ........................................................................................... 184
10.13 Replacing the Front bezel L................................................................................................. 185
10.14 Replacing the Front bezel R ................................................................................................ 186
Chapter11 Self-Diagnosis Function .......................................................................................... 187
11.1 Mechanism Test ................................................................................................................... 187
11.1.1 Demo (Slot-Drv-Slot) ..................................................................................................... 187
11.1.2 Demo (Slot-Slot) ........................................................................................................... 187
11.1.3 MSBF Test .................................................................................................................... 187
11.1.4 X-Move Test ................................................................................................................. 187
11.1.5 Y-Move Test ................................................................................................................. 187
11.1.6 Pick/Put Test ................................................................................................................. 187
11.1.7 Pick/Put/Move Test ........................................................................................................ 187
11.1.8 Vibration Test ............................................................................................................... 187
11.2 LCD/LED Test .................................................................................................................... 187
11.3 Phy Test .............................................................................................................................. 187
Chapter12 Action in breakdown and abnormal circumstances .................................................... 188
12.1 Trouble Shooting ................................................................................................................. 189
12.2 When you request maintenance ............................................................................................. 190
－xx－
Figures
Figure 1-1 Front of the Library (Above: T30A/Below: T60A) ......................................................... 2
Figure 1-2 Operator panel ............................................................................................................. 3
Figure 1-3 Magazine operation panel(left:T30A,right:T60A) .......................................................... 5
Figure 1-4 Slot Number of Magazine(Above:T30A,Below:T60A) ................................................... 7
Figure 1-5 Components on the Rear of the Library(T30A) .............................................................. 9
Figure 1-6 Components on the Rear of the Library(T60A) .............................................................. 9
Figure 1-7 Components of Rack mount kit parts ........................................................................... 16
Figure 1-8 Illustration of Rack Bars ............................................................................................ 17
Figure 1-9 Rack Dimensions ....................................................................................................... 18
Figure 1-10 Rack mount rail attachment position.......................................................................... 19
Figure 1-11 attachment of rack mount rails .................................................................................. 20
Figure 1-12 attachment of rack mount bracket R(left:T30A , right :T60A) ...................................... 21
Figure 1-13 attachment of rack mount bracket L(left:T30A , right :T60A) ...................................... 21
Figure 1-14 Mounting of library onto rack ................................................................................... 22
Figure 1-15 attachment of rack ears ............................................................................................. 23
Figure 1-16 Fastening of Library’s front side ............................................................................... 24
Figure 1-17 attachment of label plate ........................................................................................... 25
Figure 4-1 Menu Screen ............................................................................................................. 32
Figure 4-2 Component of Operator Panel ..................................................................................... 33
Figure 4-3 Accessor Icon ............................................................................................................ 34
Figure 4-4 Magazine Icon ........................................................................................................... 35
Figure 4-5 Magazine Icon(Magazine is Opened) .......................................................................... 35
Figure 4-6 Magazine Icon(I/O Station is set) ................................................................................ 35
Figure 4-7 Magazine Icon (I/O Station is opened) ........................................................................ 36
Figure 4-8 Magazine Icon(Slot Image) ........................................................................................ 36
Figure 4-9 Root screen of Top Menu ........................................................................................... 46
Figure 4-10 Move Cartidge ......................................................................................................... 69
Figure 4-11 Select source Screen................................................................................................. 69
Figure 4-12 Select Destination Screen ......................................................................................... 70
Figure 4-13 Select Execute ......................................................................................................... 70
Figure 4-14 Move Cartridge ....................................................................................................... 71
Figure 4-15 Select source screen ................................................................................................. 71
Figure 4-16 Select Destination screen .......................................................................................... 72
Figure 4-17 Select Execute ......................................................................................................... 72
Figure 4-18 Reboot Library ........................................................................................................ 74
Figure 5-1 Input URL................................................................................................................. 78
Figure 5-2 Login page(before entry) ............................................................................................ 83
Figure 5-3 Login page(after entry) .............................................................................................. 83
Figure 5-4 Library Basic Information Window ............................................................................. 84
Figure 5-5 Library map .............................................................................................................. 86
Figure 5-6 Detail(Magazine) ....................................................................................................... 87
Figure 5-7 Accessor Information ................................................................................................. 88
Figure 5-8 Library information ................................................................................................... 89
Figure 5-9 Network information.................................................................................................. 90
Figure 5-10 Notification information ........................................................................................... 91
Figure 5-11 Drive information .................................................................................................... 92
Figure 5-12 Move Cartridge ....................................................................................................... 93
Figure 5-13 Unload Drive ........................................................................................................... 95
Figure 5-14 Clean Drive ............................................................................................................. 96
Figure 5-15 Library state ............................................................................................................ 97
Figure 5-16 confirmation screen.................................................................................................. 97
Figure 5-17 UserAccess ............................................................................................................. 98
Figure 5-18 Add a User .............................................................................................................. 99
Figure 5-19 Remove a User confirmation screen ........................................................................ 100
Figure 5-20 Physical ................................................................................................................ 101
Figure 5-21 Logcal .................................................................................................................. 102
Figure 5-22 Network setup ....................................................................................................... 105
－xxi－
Figure 5-23 Date and Time setup .............................................................................................. 107
Figure 5-24 SMTP setup ........................................................................................................... 108
Figure 5-25 SNMP setup .......................................................................................................... 109
Figure 5-26 SNMPv3 setup ....................................................................................................... 110
Figure 5-27 Trap list.................................................................................................................. 111
Figure 5-28 Encryption Basis setup ............................................................................................ 112
Figure 5-29 Encryption Detail setup ........................................................................................... 113
Figure 5-30 Licenses Registration .............................................................................................. 114
Figure 5-31 Save/Restore .......................................................................................................... 115
Figure 5-32 View Library logs ................................................................................................... 117
Figure 5-33 Download Logs ...................................................................................................... 118
Figure 5-34 Reset Library / Drive............................................................................................... 119
Figure 5-35 Firmware Update ................................................................................................... 120
Figure 5-36 Usage Statistics ..................................................................................................... 121
Figure 5-37 Web Shell .............................................................................................................. 122
Figure 6-1 activation key is not registered .................................................................................. 129
Figure 6-2 activation key is registered ....................................................................................... 129
Figure 6-3 Encryption Enable ................................................................................................... 130
Figure 6-4 Master key is registered ........................................................................................... 130
Figure 6-5 Manual Input of Master key...................................................................................... 131
Figure 6-6 File Input of Master key ........................................................................................... 132
Figure 6-7 Export of Master key ............................................................................................... 133
Figure 6-8 Encryption Detail .................................................................................................... 134
Figure 6-9 Encryption Detail .................................................................................................... 138
Figure 6-10 Encryption Setting ................................................................................................. 139
Figure 6-11 manual inputting of the encryption key .................................................................... 141
Figure 6-12 file inputting of the encryption key .......................................................................... 142
Figure 6-13 Export of the encryption key ................................................................................... 143
Figure 6-14 Disabling the Encryption Management Function ...................................................... 144
Figure 6-15 Changing Master Key ............................................................................................ 145
Figure 6-16 Backup or Restore of KEY Database ....................................................................... 145
Figure 6-17 Backup of KEY Database ....................................................................................... 146
Figure 6-18 Clear of Encryption information ............................................................................. 147
Figure 8-1 Names of Cartridge Parts ......................................................................................... 152
Figure 8-2 Data Cartridge Label ................................................................................................ 154
Figure 8-3 Attaching a cartridge label ........................................................................................ 155
Figure 8-4 Write Protection of cartridge ..................................................................................... 156
Figure 9-1 Confirming the Firmware Version ............................................................................. 162
Figure 9-2 Firmware Update Window (Library Firmware Update) ............................................... 163
Figure 9-3 Firmware Update Window (Drive Firmware Update) ................................................. 164
Figure 10-1 Save/Restore Window ............................................................................................ 168
Figure 10-2 Save/Restore Window ............................................................................................ 169
－xxii－
Tables
Table 1-1 Status LED on OperatorPanel......................................................................................... 3
Table 1-2 Button on OperatorPanel ............................................................................................... 4
Table 1-3 Status LED on Magazine Operation panel ....................................................................... 5
Table 1-4 Button on Magazine Operation panel .............................................................................. 5
Table 1-5 Drive Sled ingicator .................................................................................................... 10
Table 1-6 component list of rack mount kit parts .......................................................................... 16
Table 1-7 internal Dimension Requirements for rack .................................................................... 18
Table 2-1 Setting item ................................................................................................................ 29
Table 4-1 Library Status displayed in the Operation Panel ............................................................. 34
Table 4-2 Drive Status Icons ....................................................................................................... 36
Table 4-3 Drive Status Icons ....................................................................................................... 37
Table 4-4 Drive Message ............................................................................................................ 37
Table 4-5 Asynchronization Message .......................................................................................... 39
Table 4-6 Menu tree of commands .............................................................................................. 40
Table 4-7 Menu tree of configuration .......................................................................................... 41
Table 4-8 Menu tree of current information .................................................................................. 42
Table 4-9 Menu tree of Service ................................................................................................... 43
Table 4-10 Menu tree of logout ................................................................................................... 43
Table 4-11 Commands Submenus ............................................................................................... 47
Table 4-12 Configuration Submenus ........................................................................................... 48
Table 4-13 Library Setting Submenu ........................................................................................... 49
Table 4-14 Network Setting Submenu ......................................................................................... 50
Table 4-15 IPv4 Setting Submenu ............................................................................................... 50
Table 4-16 IPv6 Setting Submenu ............................................................................................... 50
Table 4-17 Drive Settings Submenu ............................................................................................ 51
Table 4-18 port setting submenu ................................................................................................. 51
Table 4-19 OP Panel Settings Submenu ....................................................................................... 52
Table 4-20 Date / Time Submenu ................................................................................................ 52
Table 4-21 Current Information submenu..................................................................................... 53
Table 4-22 Information to be displayed on Setting Information menu............................................. 53
Table 4-23 Information to be displayed on Slot Information menu ................................................. 53
Table 4-24 Service submenu ....................................................................................................... 54
Table 4-25 Information to be displayed on View Error Status ........................................................ 54
Table 4-26 Diagnostics ............................................................................................................... 54
Table 4-27 Information to be displayed on Statistics ..................................................................... 55
Table 4-28 Information to be displayed on View Revision ............................................................. 55
Table 4-29 Test to be displayed on Advanced Service ................................................................... 56
Table 4-30 Information to be displayed on View Revision ............................................................. 56
Table 5-1 Connection Setting (IPv4) ............................................................................................ 77
Table 5-2 Connection Setting (IPv6) ............................................................................................ 77
Table 5-3 Menus available at various user access levels ................................................................ 82
Table 5-4 Event List ................................................................................................................. 123
Table 5-5 Event List ................................................................................................................. 124
Table 6-1 Troubleshooting Table ............................................................................................... 148
Table 8-1 Drive/Cartridge Compatibility .................................................................................... 153
Table 8-2 Cartridge label code .................................................................................................. 154
Table 10-1 Maintenance Parts List ............................................................................................ 167
－xxiii－
Preface
This User's Guide describes the operation (mainly for the hardware) of the T30A and T60A Tape
Library (hereinafter called "T30A Library" or "T60ALibrary" or ”Library”).
Refer to the manual of the backup software for commands and console messages of backup software.
This manual is intended for the operator of the library, however, it provides useful information
for system programmer and system administrator of the computer.
1st edition,September 2016
Remarks
(1) Trademarks
- Linear Tape-Open, LTO, Ultrium are trademarks of Hewlett-Packard Company, International
Business Machines Corporation, and Quantum of the U.S.A.
- IBM is a registered trademark of International Business Machines Corporation of the U.S.A.
- HP is registered trademarks of Hewlett-Packard Company of the U.S.A. in the United States.
- Windows is registered trademarks of Microsoft Corporation in the United States and other
countries.
- Java and other Java-based names and logos are trademarks or registered trademarks of Oracle
Corporation, Inc. in the United States and other countries.
This manual describes neither nor clearly.
(2) No part of this manual may be reproduced in any form without the prior written permissi
on of NEC Corporation.
(3) The contents of this manual may be revised without prior notice.
(4) The contents of this manual shall not be copied or altered without the prior written permi
ssion of NEC Corporation.
(5) All efforts have been made to ensure the accuracy of all information in this manual. If y
ou notice any part unclear, incorrect, or omitted in this manual, contact the service represe
ntative where you purchased this product.
－xxiv－
Exemptions
(1) NEC assumes no liability arising from the use of this product, nor any liability for incidental or
consequential damages arising from the use of this manual regardless of Item (5) on the previous
page.
(2) NEC assumes no liability for the data stored in memory (data cartridge) regardless of existence of
an error or a failure.
(3) NEC assumes no liability for the damages caused by an earthquake, fires beyond our
responsibility, action by the third party, other accidents, customers' intended or unintended faults,
incorrect operation, and other uses under abnormal conditions.
(4) NEC assumes no liability for the accompanying damages (e.g., profit loss or business
interruption) arising from the use or unserviceable state.
(5) NEC assumes no liability for the damages caused by ignoring the description in this manual.
(6) NEC assumes no liability for the damages arising from the malfunction of the unit caused by the
use of an unauthorized devices and/or software.
Use Limitation
(1) This product is not intended to be used for the system which includes the devices which may
directly affect human lives. Do not use the product for such a purpose.
(2) Special consideration for the operation, maintenance, and management of the system are required
when this product is used for the system including the devices which may affect human safety
and public facility. Contact your service representative for such a case.
－xxv－
This page is intentionally blank.
－xxvi－
Chapter1 General Description
This chapter describes the major hardware components of the library system and the system
specifications.
The T30A tape library is an automated tape management system that contains one or two LTO
Ultrium drives. This library can house up to 30 cartridges.
The T60A tape library is an automated tape management system that contains one to four LTO
Ultrium drives. This library can house up to 60 cartridges.
1.1 Handling Precautions
Follow the instructions below to ensure that the product operates normally.
1.1.1 Notes on Use
The product has a cooling fan on the back. Do not obstruct the air vent or use the product in a
badly ventilated place. Do not store or use the product in an extremely hot place or a place
subject to sudden changes in temperature.
The product is made up of precision electronic components. Avoid applying shock to the
product, and do not store or use the product in a place subject to vibration.
Do not store or use the product in a place where it might come into contact with chemical
substances or vaporized chemicals.
Do not move or transport the product with its power on.
Do not store or use the product with heavy objects placed on it.
Do not turn off the power to the product while it is operating.
Do not insert cartridges in the magazine that do not comply with the product specifications.
1.2 Transfer of Library
When transferring (or selling) the product or any of its accessories to a third party, follow the
instructions below.
Main unit
When transferring (or selling) the product to a third party, be sure to also provide this guide.
Accessories
Since all accessories are required for setup and other procedures, they should be provided as well.
-1-
(1)
(2)
(3)
1.3 Names and Features of Components
This section shows the location of each component of the library and outlines its operation.
For information about how to mount the library in the rack, see "1.7Installing the Rack Mounting
Kit.")
1.3.1 Front View
Figure 1-1 Front of the Library (Above: T30A/Below: T60A)
(1).Magazine operation panel
(When the front panel is removed, the Ethernet connector for maintenance is found inside.)
(2).Magazine
(T30A has one magazine, and T60A has two magazines (upper and lower).)
(3).Operator panel
-2-
Ready indicator
This Green LED is on when library is ready state to the host.
On :Ready
Blinking : Library being initialized or an inventory is being taken
:The accessor moves by the command from the host/WEB/operator panel
: Initialize the drive / Diagnosing / Magazine is opend / Library is offline state.
Drive cleaning indicator
Lighting:The drive is requesting cleaning.
Blinking:The drive is being cleaned.
Cartridge error indicator
Lighting：This Orange LED is on when the cartridge error has been detected.
When SCD=6/7/J is reported in cartridge Load to Drive.
When Cleaning cartridge is used 50 times or more.
Turning off method:Magazine opening and shutting
Attention:After it is opened and shut,this LED doesn’t light even if the cartridge judged to be
abnormal before is turned on again in the magazine. (similar in case of I/O station)
Library error indicator
Lighting:This Orange LED in on when drive or accessor error has been detected.
Blinking:The library has recovered from error.
Turning off method:After the library has recovered(Blinking),please execute a warning off from
operator panel.(refer to 4.4.1)
1.3.2 Operator panel
The operator panel has LEDs that indicate the status of the library, an LCD panel that displays the
library status, operations, messages, library settings, error messages, etc., and buttons used to operate the
library.
Figure 1-2 Operator panel
1.3.2.1 Status LED
The following four LEDs are included in the operation panel.
Table 1-1 Status LED on OperatorPanel
-3-
Loading...