92600GLO02
April 2001
Printed in U.S.A. (2562)
Soft Key Glossary
i-Series Soft Key Glossary
Abb Abbreviated Dial
Add With an established Conference call, press any soft key to
add another call to the Conference.
All Used when programming Call Forwarding to forward all calls.
OR
Appears when programming Park and Page. This allows all
calls to be Parked and Paged.
OR
Appears when programming Personal Greeting. This
allows you to forward all calls to your Personal Greeting
message.
OR
Appears when programming Do Not Disturb to block all calls.
OR
Appears when cancelling Message Waiting or Callback
requests. This key will clear all requests you left or that
someone left for you.
Alm Alarm: Allows you to set Alarm 1 or Alarm 2 on your phone.
Alm1 Alarm 1: Used with the Alarm feature. This allows you to
set the time for Alarm 1.
Alm2 Alarm 2: Used with the Alarm feature. This allows you to
set the time for Alarm 2.
AME Answering Machine Emulation: Used when programming
Call Forwarding to select the Answering Machine
Emulation mode.
AnHd Answer Hold: Appears while placing a Conference call.
After pressing CONF to place the first call on hold, pressing this key will pick up the call if you choose not to complete the Conference call.
Back View previous menu.
Barg Barge In: Appears when calling a busy extension. Pressing
BARG activates the Barge In feature.
Begin Appears when placing a Conference call. Pressing BEGIN
will Conference all the calls together.
B/NA Busy/No Answer: Used when programming Call
Forwarding to forward calls only when the extension is
busy or the call is not answered.
i-Series Soft Key Glossary
Both Used when programming Call Forwarding with the Follow
Me feature. This will allow both extensions to ring.
Bypass Appears when calling an extension which is set for Call
Forwarding. By pressing the BYPASS key, the Call
Forward/DND Override feature is activated, allowing the
call to ring the originally called extension.
Camp Camp On/Callback: Appears when placing an intercom
call. If pressed, it activates the Call Waiting/Camp On feature, or if you hang up, it activates the Callback feature.
OR
Camp On/Callback: Appears when you try to place an outgoing call and all trunks are busy. This key allows you to Camp
On or program a Callback when a line becomes available.
Cfwd Call Forward: Programs an extension for Call Forwarding.
CfwTo Call Forward To: Appears when programming Do Not
Disturb to block forwarded calls.
CLR Clear: Allows you to clear Message Waiting or Callback
requests either left for you or that you left for someone else.
CnCF Cancel Call Forwarding.
Cncl Cancel: Used when Call Forwarding is active. Pressing this
key will deactivate Call Forwarding.
OR
Cancel: When programming Selectable Display Messaging, this
allows you to cancel your action and return to an idle display.
CnRp Cancel Repeat Redial: Appears on an idle display when the
Repeat Redial feature is activated. Pressing CNRP will cancel it.
CO Central Office: Used when programming Call Forwarding
to forward only C.O. calls.
OR
Allows you to forward all your central office calls to your
Personal Greeting.
Conf Conference: Appears while on an active call. Pressing
CONF will allow you to set up a Conference call.
Comb Combine Page Zone: When programming Park and Page,
this option is used to page both internal and external page
zones when you have a call.
i-Series Soft Key Glossary
Dev Device: Used with Call Forwarding to determine the type of
forwarding to be used (display/Selectable Display Messages,
Off-Premise Call Forwarding, Personal Greeting).
Dir Directory: Use the directory list to place an intercom call to
an extension.
OR
Directory: Appears when joining calls in a Conference call.
You can use Directory Dialing to call an extension.
Disp Display: Used when programming a Selectable Display
Message in the Call Forwarding feature.
DND Do Not Disturb
ExPg External Page: Used to make an external page.
Ext External Page Zone: Used when programming Park and Page
to select the external page zone you wish to use.
OR
External: Appears when programming Do Not Disturb to
block external calls.
Fctn Function: Pressing this key allows you to define
Programmable Function Keys.
Flw Follow Me: Used when programming Call Forwarding to
activate the Follow Me feature.
Grp Group: Appears when programming Abbreviated Dialing.
This allows you to program a group Abbreviated Dialing
number.
ICM Intercom: Allows access to intercom options.
OR
Intercom: When Callback is enabled, this allows you to
cancel all intercom Camp On or Callbacks.
OR
Intercom: Appears when programming Do Not Disturb to
block internal calls.
Imm Immediate: Used when programming Call Forwarding to
immediately forward calls.
InPg Internal Page: Used to make an internal page.
i-Series Soft Key Glossary
Int Internal Page Zone: Used when programming Park and
Page to select the internal page zone you wish to use.
OR
Intercom: When programming Call Forwarding, this allows
you to program your phone to forward only intercom calls.
OR
Intercom: Appears when programming an extension’s intercom call type: ringing or voice announce.
Line Line Callback: Allows you to cancel central office Camp
On or Callbacks.
More More options are available for viewing.
MW Message Waiting: An extension can use this key to return a
Message Waiting left by another extension.
OR
If the CLR key is pressed, MW allows you to clear Message
Waiting requests you left or that someone left for you.
MsgA Message Answer: When an extension has messages, this
appears allowing the extension to return the Message
Waiting or call Voice Mail.
MsgWt Message Wait: Appears when placing an intercom call. If
pressed, it activates the Messaging Waiting feature for the
called extension.
NA No Answer: Used when programming Call Forwarding to
forward calls only if the call is not answered.
OffP Off Premise: Used when programming Off-Premise Call
Forwarding.
OneT One Touch key programming.
OvRd Override: Appears when placing a call to an extension that
is set for Do Not Disturb. Pressing OVRD will override the
DND setting, if your extension has that ability.
Page While programming Park and Page, this allows you to
record your Page announcement.
PgPU Used to answer a Meet-Me Page that has been set.
PGrt Personal Greeting: Used when programming a Personal
Greeting within the Call Forward menu.
Prev Previous: View previous menu.
i-Series Soft Key Glossary
Prog Program station options.
R:7 L:5 E:3 While programming Park and Page or Personal Greeting,
this allows you to record (R:7), listen (L:5), or erase (E:3)
your message.
Revd Received: Appears when cancelling Message Waiting or
Callback requests. This key will clear requests that anyone
has left for you.
Ring Appears when programming an extension’s intercom call
type. Press RING if you want your extension to ring when
you receive an intercom call.
OR
Appears when placing a call to an extension. This allows you
to change an intercom call you place from voice announce to
ringing. Once RING is pressed, it changes to VANN.
Rls Release: Allows you to return the phone’s display to an idle
condition.
Rpt Repeat Redial: Pressing this key activates the Repeat Redial
feature.
Save Save: Used when programming a Selectable Display
Message. This key saves the displayed programmed message.
OR
Used when programming a Personal Greeting to save your
message.
OR
Used when recording a Park and Page greeting to save
your message.
OR
Appears when placing an outgoing call. Pressing this key
will enable the Save Number Dialed feature, allowing you
to redial the number using a function key/code.
Sent Appears when cancelling Message Waiting or Callback requests.
This key will clear all requests you left for any extensions.
Set Used with Do Not Disturb to set the type of DND.
OR
Appears when joining calls together for a Conference call.
Pressing SET places the call on hold and allows you to
either add another call to the Conference or press BEGIN
to join all the calls together.
i-Series Soft Key Glossary
Sta Station: Used with Call Forwarding to determine the type of
forwarding to be used.
Sys System: Appears when programming Abbreviated Dialing.
This allows you to program a system/common Abbreviated
Dialing number.
Trf Transfer: Transfers a call to another extension.
VAnn Voice Announce: Appears when placing a call to an exten-
sion which is programmed to receive ringing intercom
calls. This allows you to change an intercom call you place
from ringing to voice announce. Once VANN is pressed, it
changes to RING.
VMsg Voice Message: Appears when placing an intercom call. If
pressed, it transfers you to the voice mailbox for that extension.
OR
Voice Message: If you have voice mail messages, pressing
VMSG allows you to access the voice mail.
Voic Voice: Appears when programming an extension’s intercom
call type. Press VOIC if you want your extension to voice
announce incoming intercom calls.
Zone After selecting the Park and Page feature, this will appear to
allow you to program what page zone should be used when
announcing your page.
↓ Used when programming a Selectable Display Message.
After entering a message number, press any soft key, then
↓ to scroll down through the programmed messages.
↑ Used when programming a Selectable Display Message.
After entering a message number, press any soft key, then ↑
to scroll up through the programmed messages.
NEC America, Inc., Corporate Networks Group
4 Forest Parkway, Shelton, CT 06484
TEL: 203-926-5400 FAX: 203-929-0535
cng.nec.com
Loading...