Page 1
NEC S-Series Storage
S4900 / S2900 / S2500 / S1500
iii
Page 2
NEC S-Series Storage meets the most
advanced requirements for data storage
from small to large enterprises.
The growing volume of data has a tremendous impact
on all facets of a business from the enterprise to the
workgroup. That is why it is essential to have storage
products that increase data efficiency, provide full
availability and allow the business to realize an
extremely low cost of ownership. To meet this requirement, NEC provides a full range of storage products
— from the NEC Storage S4900, which is a high end
storage system with advanced crossbar technology to
NEC Storage S4900
High-end model
an entry-level model that is very cost-effective. These
products provide for high-performance and function
including 4Gbps FC host interface and low cost
backup/archive with mixture of high-perfor-mance FC
and low cost SATA disk drives*1. These functions are
maintained by a very functional series of NEC storage
management and control software. NEC S-Series
Storage opens the path to a new IT environment.
*1: NEC Storage S2900, NEC Storage S2500, NEC Storage S1500
2
Page 3
NEC S-Series Storage
PERFORMANCE
NEC Storage S2900
Mid-high-range model
S1500
S2500
S2900
S4900
Large-scale data centers
•
Large-scale core business operations
•
ISP/ASP/iDC
•
Mid-scale core business operations
•
Disaster prevention/backup
•
Small-scale core business operations
•
Small-scale department servers
•
CAD/CG data
•
Workgroup
•
Backup
•
Archive
•
PRICE
NEC Storage S2500
Mid-range model
NEC Storage S1500
Low-end model
3
Page 4
Advanced Technologies
Excellent Management and Operational Functions
■ Ultra high-performance
with ultra high availability
Using ultra high speed cross bar technology connecting cache
function and node function the NEC S Series storage provides
for end-to-end performance and availability. The S4900 has a
bandwidth of 192GB/s which allows for high-speed access to
data even with many servers attached. Redundancy provides for
full data availability even in the event of a component failure.
■ Equipped with 4Gbps FC host interface
Maximum bandwidth of 400MB/s with 4Gbps FC host interface
allows high speed response even with many servers connected.
■ RAID 6 substantially increases availability
As the capacity of disk drives increase, it takes substantially
longer to re-build data in the event of a disk drive failure. Using
RAID 6, which utilizes dual parity, this is minimized and can
also accommodate two drive failures without any loss of data
availability.
*1: HA: Host Adapter *2: DA: Disk Adapter v in the case of S4900
■ Cache redundancy
prevents response degradation
The cache for the S4900 has two sets of mirrored cache. The
redundancy permits cache writes even in the event of a cache
failure. This provides for safe and high-speed response.
v in the case of S4900
■ Virtual capacity management
The Dynamic Pool function allows LUN capacity to be expanded
or reduced in a RAID 6 environment without disruption to the
application. *1: Expansion by 6 or 10 HDDs for S4900
4
Page 5
■ Phoenix technology to prevent
business operations being interrupted
This technology first isolates the disk drive where a response
delay has occurred, and automatically checks this isolated
disk drive. If no problem is found, the isolated disk is restored
to the original RAID configuration, minimizing the chance of
switching to the hot spare disk. This technology also minimizes
the delay in accessing from a server, because a disk drive where
a response delay occurs is isolated temporarily, and other disk
data in the RAID is used to continue processing.
■ Low-cost backup/archive by
mixture of FC/SATA disk drives
S2900/S2500/S1500 supports large capacity, low cost SATA
disk drives as well as FC disk drives. FC disk drives for core
business operations which require non-stop operation and high
performance, and SATA disk drives for backup which requires
large capacity and low cost. Both kinds of disk drives can be
installed in a single disk array unit.
■ Replication functions
NEC S Series storage can satisfy a variety of needs including
high-speed disk backup as well as low-cost backup with its full
suite of replication functions.
■ Security access control
Access to individual logical disks can be controlled. Write
access can be restricted from any server providing for complete
security and integrity of data.
5
Page 6
High-end Model
For the new area of core business operations and net-business that require uninterrupted,
high-reliability, high-speed systems. Equipped with state-of-the-art technologies, including NEC’s
independently developed “crossbar technology.”
S4900
High-end model equipped with
state-of-the-art technologies
(up to 360TB - raw)
NEC Storage S4900
Host interface
Number of host ports
Capacity
Cache memory
Battery backup time
RAID level
Disk interface
73 GB disk drive
Disk drive
147 GB disk drive
specification
300 GB disk drive
73 GB disk drive
147 GB disk drive
300 GB disk drive
Storage
73 GB disk drive
*3 *4
capacity
147 GB disk drive
300 GB disk drive
Number of disk drives
Supported operating systems
Rotational
speed
Capacity
(Formatted)
*5
*2
Fibre channel (up to 400 MB/s)
8 to 128 ports
8 GB (effective capacity: 4 GB) to 128 GB (effective capacity: 64 GB)
Up to 96 hours
RAID-1, 5, 10, 50, 6
Fibre channel (up to 200 MB/s)
66.6GB
133.1GB
268.1GB
10,000rpm / 15,000rpm
10,000rpm / 15,000rpm
10,000rpm
282GB~63.8TB
569GB~127.8TB
1.1TB~257TB
Basic configuration Maximum configuration
12 to 60 (hot spares: 4) 1,200 (hot spares: 80)
HP-UX, Solaris, Microsoft
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
*1
®
Windows® 2000 Server, Microsoft® Windows Server® 2003
Cabinet dimensions (W x D x H)
Weight
Power requirements
Power consumption
*1: 96 hours with 8 to 64 GB cache memory, 72 hours with 80 to 128 GB cache memory. *2: Value obtained by calculation using 1 GB = 1,000,000,000B. *3: With seven expanded cabinets with the
same disk drives and RAID configurations linked together. *4: RAID-6 (4+PQ) configuration for minimum capacity, RAID-6 (8+PQ) configuration for other capacity. *5: There are some restrictions on
how disk drives are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
The “Eco Symbol” is displayed on products that meet NEC’s environmental standards. For details
of these standards, please see the NEC website at: http://www.nec.co.jp/eco/en
*6
6
12 to 60 (hot spares: 4) 1,200 (hot spares: 80)
882 lbs. 10,340 lbs.
AC200~240V Single phase 50 / 60Hz
5.4kW 31.4kW
Page 7
Mid-high-range Model
For the core business operations of medium-sized enterprises that require high reliability,
high-operability, and high-speed systems, and disaster contingency planning that pursues cost
effectiveness. Advanced functions of the high-end models are provided by the mid-range models.
S2900
Equipped with high-speed 4Gbps FC host interface, both
FC and SATA disk drives are installable. A mid-high-range
model, providing the functions and operability of large-sized
models economically (up to 108TB - raw)
NEC Storage S2900
Cabinet configuration
Host interface
Number of host ports
Capacity
Cache memory
Battery backup time
RAID level
Disk interface
73 GB disk drive
147 GB disk drive
300 GB disk drive
Disk drive
500 GB disk drive
specification
73 GB disk drive
147 GB disk drive
300 GB disk drive
500 GB disk drive
73 GB disk drive
147 GB disk drive
Storage
*2
capacity
300 GB disk drive
500 GB disk drive
Number of disk drives
Supported operating systems
Disk array controller
Cabinet dimensions
(W x D x H)
Disk enclosure
Disk array controller
Weight
Disk enclosure
Power requirements
Power consumption
configuration
SATA configuration
Capacity
(Formatted)
Rotational
speed
FC
*1
FC
SATA
FC
SATA
*3
Up to 16 disk enclosures can be connected to the disk array controller. One disk
enclosure can house up to 15 disk drives.
Fibre channel (up to 400 MB/s)
8 ports
4 GB (effective capacity: 2 GB) to 16 GB (effective capacity: 8 GB)
Up to 96 hours
RAID-1, 5, 10, 50, 6
Fibre channel (up to 200 MB/s), Serial-ATA (up to 150MB/s)
66.6GB
133.1GB
268.1GB
458.3GB
10,000rpm / 15,000rpm
10,000rpm / 15,000rpm
10,000rpm
7,200rpm
143GB~13.7TB
285GB~27.4TB
576GB~55.2TB
2.1TB~84.6TB
4 to 240
HP-UX, Solaris, Microsoft® Windows® 2000 Server, Microsoft® Windows Server® 2003,
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
19" x 23.5" x 5.25"
19" x 23.5" x 5.25"
80 lbs.
100 lbs.
DC-48V / plus 5-15 receptacle
839W~8,564W
*1: Value obtained by calculation using 1 GB = 1,000,000,000B. The capacity of each disk drive is slightly lower with RAID-6 configuration. *2: For FC HDD, RAID-1 configuration for
minimum capacity, RAID-5 configuration for maximum configuration. For mixture of FC and SATA HDD, RAID-6 (4+PQ) with SATA HDD and RAID-1 with FC 73GB HDD configura
tion for minimum capacity, RAID-6 (8+PQ) with SATA HDD and RAID5 with FC 300 GB HDD configuration for maximum capacity. *3: There are some restrictions on how disk drives
are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
-
7
Page 8
Mid-range Model
For areas such as operations and other work groups that require high reliability, space-savings,
and expandable systems. By mixing FC/SATA disk drives
*1
, large amounts of data can be stored
cost-effectively. *1: Optional disk enclosure is required to install SATA disk drives.
S2500
Mid-range model with high-speed
4Gbps FC host interface, FC/SATA
disk drives installable, and space
saving (up to 48TB - raw)
NEC Storage S2500
Cabinet configuration
Host interface
Number of host ports
Cache memory
Capacity
Battery backup time
RAID level
Disk interface
73 GB disk drive
147 GB disk drive
Disk drive
300 GB disk drive
specification
500 GB disk drive
73 GB disk drive
147 GB disk drive
300 GB disk drive
500 GB disk drive
73 GB disk drive
147 GB disk drive
Storage
*2
300 GB disk drive
capacity
500 GB disk drive
Number of disk drives
Supported operating systems
Disk array controller
Cabinet dimensions
(W x D x H)
Disk enclosure
Disk array controller
Weight
Disk enclosure
Power requirements
Power consumption
configuration
SATA configuration
Capacity
(Formatted)
Rotational
speed
FC
*1
FC
SATA
FC
SATA
*3
Up to 7 disk enclosures can be connected to the disk array controller.
One disk array controller or disk enclosure can house up to 15 disk drives.
Fibre channel (up to 400 MB/s)
4 ports
4 GB (effective capacity: 2 GB) to 8 GB (effective capacity: 4 GB)
Up to 72 hours
RAID-0, 1, 5, 10, 50, 6
Fibre channel (up to 200 MB/s), Serial-ATA (up to 150MB/s)
66.6GB
133.1GB
268.1GB
458.3GB
10,000rpm / 15,000rpm
10,000rpm / 15,000rpm
10,000rpm
7,200rpm
143GB~6.8TB
285GB~13.7TB
576GB~27.6TB
2.1TB~37.4TB
4 to 120
HP-UX, Solaris, Microsoft® Windows® 2000 Server, Microsoft® Windows Server® 2003,
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
19" x 23.5" x 5.25"
19" x 23.5" x 5.25"
80 lbs.
100 lbs.
DC-48V / plus 5-15 receptacle
680~4,285W
*1: Value obtained by calculation using 1 GB = 1,000,000,000B. The capacity of each disk drive is slightly lower with RAID-6 configuration. *2: For FC HDD, RAID-1 configuration for
minimum capacity, RAID-5 configuration for maximum configuration. For mixture of FC and SATA HDD, RAID-6 (4+PQ) with SATA HDD and RAID-1 with FC 73GB HDD configura
tion for minimum capacity, RAID-6 (8+PQ) with SATA HDD and RAID5 with FC 300 GB HDD configuration for maximum capacity. *3: There are some restrictions on how disk drives
are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
8
-
Page 9
Low-end Model
Low-end model for departmental operations and work groups. By mixing FC/SATA disk drives*1, large
amounts of data can be stored cost-effectively. *1: Optional disk enclosure is required to install SATA disk drives.
S1500
Low-end model with high-speed
4Gbps FC host interface, FC/SATA
disk drives installable, and excellent
price performance (up to 27TB - raw)
NEC Storage S1500
Cabinet configuration
Host interface
Number of host ports
Capacity
Cache memory
Battery backup time
RAID level
Disk interface
73 GB disk drive
147 GB disk drive
300 GB disk drive
Disk drive
500 GB disk drive
specification
73 GB disk drive
147 GB disk drive
300 GB disk drive
500 GB disk drive
73 GB disk drive
147 GB disk drive
Storage
*2
capacity
300 GB disk drive
500 GB disk drive
Number of disk drives
Supported operating systems
Disk array controller
Cabinet dimensions
(W x D x H)
Disk enclosure
Disk array controller
Weight
Disk enclosure
Power requirements
Power consumption
SATA configuration
*1
Capacity
(Formatted)
Rotational
speed
FC
configuration
*3
FC
SATA
FC
SATA
Up to 3 disk enclosures can be connected to the disk array controller.
One disk array controller or disk enclosure can house up to 15 disk drives.
Fibre channel (up to 400 MB/s)
4 ports
2 GB (effective capacity: 1 GB) to 4 GB (effective capacity: 2 GB)
Up to 72 hours
RAID-0, 1, 5, 10, 50, 6
Fibre channel (up to 200 MB/s), Serial-ATA (up to 150MB/s)
66.6GB
133.1GB
268.1GB
458.3GB
10,000rpm / 15,000rpm
10,000rpm / 15,000rpm
10,000rpm
7,200rpm
71.6GB~3.4TB
142GB~6.8TB
288GB~13.8TB
2.0TB~21.1TB
3 to 60
HP-UX, Solaris, Microsoft® Windows® 2000 Server, Microsoft® Windows Server® 2003,
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
19" x 23.5" x 5.25"
19" x 23.5" x 5.25"
80 lbs.
100 lbs.
DC-48V / plus 5-15 receptacle
590~2,135W
*1: Value obtained by calculation using 1 GB = 1,000,000,000B. The capacity of each disk drive is slightly lower with RAID-6 configuration. *2: For FC HDD, RAID-1 configuration for
minimum capacity, RAID-5 configuration for maximum configuration. For mixture of FC and SATA HDD, RAID-6 (4+PQ) with SATA HDD and RAID-1 with FC 73GB HDD configura
tion for minimum capacity, RAID-6 (8+PQ) with SATA HDD and RAID5 with FC 300 GB HDD configuration for maximum capacity. *3: There are some restrictions on how disk drives
are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
-
9
Page 10
Business operations can be managed
in a single way across the system.
NEC Storage S Series
· Message cooperation
·
NEC Storage Manager can be activated
from the integrated viewer screen (launcher function).
Cooperation
System administrator
NEC Storage Manager
The operating status and messages for
the system as a whole can be monitored
using the integrated viewer.
Servers
Software
NEC provides software products to meet
a diverse range of customer needs.
Storage Management
Device Management
Performance Management
STORAGE SOFTWARE
Storage Management
As IT systems store more and more data every year, it is
becoming more important to operate and manage data
efficiently. Storage Management Software provides a group of
integrated operation management products to perform total
management of storage systems. It provides more efficient
storage operation management by supporting management
tasks including fault and performance monitoring and making
backups in a unified way, decreasing the TCO (Total Cost of
Ownership).
Storage Control
Replication
Disaster Recovery
Resource Control
High Availability
Device Management
The NEC Storage Manager keeps track of the status,
configuration, and conditions of the disk arrays. These functions
are tightly integrated with operation management software,
making total system management possible.
Performance Management
Storage Management Software provides management
information about the performance and capacity of disk arrays,
making efficient storage management possible.
NEC Storage Manager
10
Page 11
Storage Control
T
ape
device
Effects of use (example)
Online data
Replication
Before use
After use
Replication
Two copies can be created at the same time.
n
o
itarepo
en
i
ln
O
noitarepoen
i
l
nO Backup Batch
Backup
Batch
Online operation
Concurrent processing
Online operation
Stop online
Data replication
·
NEC Storage DynamicDa taReplication
·
NEC Storage RemoteDat aReplication
·
NEC Storage DynamicSn apVolume
hcta
BenilnO Backup
Building an IT system where a diverse range of business
activities are carried out requires the efficient use of data and a
system with high availability. Storage Control Software provides
the basic system functions to ensure that the system is highly
Disaster Recovery
Storage Control Software provides the function to implement
disaster recovery by providing the basic functions for disaster
control solutions.
available and operable, with a data protection function with no
influence on online operations, a disaster recovery function,
autonomous resource management, and the efficient use of
resources.
Resource Control
Storage Control Software provides functions which
autonomously adjust resources, by eliminating bottlenecks and
setting access controls, so that resources can be used safely
Replication
and efficiently.
Storage Control Software provides functions for protecting data
and improving the operability of data without affecting online
operations by duplicating volumes in the storage system.
High Availability
Storage Control Software has a path switching function to
provide for high availability.
Replication
• NEC Storage DynamicDataReplication
• NEC Storage RemoteDataReplication
These provide replication functions for systems that require high performance and high reliability.
• NEC Storage DynamicSnapVolume
Provides a replication function for cost-performance-oriented systems, with the ability to create snapshots holding the differences in updated data only.
Software
Type Product name S1500 S2500 S2900 S4900 Feature
Device
Management
Storage
Management
Storage
Control
*1: included in NEC Storage BaseProduct *2: Microsoft® SQL Server™ 2000 is also supported
Performance
Management
Replication
Management
Replication
Disaster
Recovery
Resource
Control
Performance
Management
NEC Storage Manager *1
NEC Storage ReallocationControl
NEC Storage PerformanceMonitor
NEC Storage PerformanceNavigator
NEC Storage ReplicationControl
SQL Option
NEC Storage
ReplicationControl FileSystemOption
NEC Storage DynamicDataReplication
NEC Storage RemoteDataReplication
NEC Storage DynamicSnapVolume
NEC Storage
RemoteDataReplication/DisasterRecovery
NEC Storage AccessControl
NEC Storage PerformanceOptimizer
NEC Storage CachePartitioning
NEC Storage VolumeProtect
NEC Storage PathManager
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
Basic storage management functions
(monitoring status and displaying configurations)
Disk resource optimization function
Performance monitoring function
Function for increasing the efficiency
of performance analysis
Option to enable non-disruptive backup of
Microsoft® SQL Server™ 2005 *2
File system synchronized disk separation option
Function for replicating volumes within
the same storage system
Function for replicating volumes across
different storage systems
Function for creating snapshots using
the disk capacity efficiently
Basic function to enable the recovery of
business operations in a disaster
Function to enable and disable disk access
Function to optimize disk performance
Cache partitioning function
Function to protect the data from
improper access
Path redundancy function
11
Page 12
Safety Notice: Before you use this product, please read carefully and comply with the
cautions and warnings in manuals such as User’s Manual, Installation Plan Manual
and Operation Manual. Incorrect use may cause a fire, electrical shock or injury.
© 2006 NEC is a registered trademark of NEC Corporation. All rights reserved. Microsoft, Windows, Windows
NT are trademarks or registered trademarks of Microsoft Corp. (the United States) in the United States and other
countries. Solaris is a registered trademark of Sun Microsystems, Inc. (the United States). HP is a trademark of
Hewlett-Packard Company (the United States) in the United States. UNIX is a registered trademark of The OPEN
Group. Linux is a trademark or registered trademark of Mr. Linus Torvalds in the United States and other countries.
Red Hat is a trademark or registered trademark of Red Hat, Inc. in the United States and other countries. MIRACLE
LINUX is a registered trademark of MIRACLE LINUX Corp. AIX is a registered trademark of International Business
Machines Corp. (the United States) All other products, brands, and trade names used in this document are
trademarks or registered trademarks of their respective holders. Specifications and designs in this catalog are
subject to change without notice.
For further information please contact:
NEC Corporation of America
2890 Scott Boulevard
Santa Clara, CA 95050
www.necam.com
Loading...