Miele PUR88W Specifications

30” Wall Ventilation Hood
PUR 88 W
Specification Sheets TRS 08142017
8mieleusa.com
30” Wall Ventilation Hood PUR 88 W
SPECIFICATIONS
PUR 88 W — Item
Overall Unit Width 267/16” (748 mm)
Overall Unit Height - Vented 26
Overall Unit Height - Recirculated 32
Overall Unit Depth 19
Fan
Fan Speeds 4, Including Intensive setting
Maximum CFM
Duct
Recommended Duct Diameter 6” (150 mm)
Electrical
PUR 88 W Features:
• Front mounted backlit controls
• LED ClearView lighting
• Stainless steel finish
• Polished stainless steel logo
• Automatic shut-off of intensive level, programmable for 10 minutes
• Removable dishwasher-safe stainless steel grease filter
• Four fan speeds (incl. intensive)
Electrical Requirements 120V, 60Hz,15A
Power Cord Molded NEMA 5-15 plug, 4’ 11” (1.5 m)
Shipping
Shipping Weight -- lbs (-- kg)
Shipping Dimensions --
Support
Call Miele (800) 999-1360
Miele Website
20/20 Link
28428654USA
15
/16” (685 mm) - 399/16” (1005 mm)
/16” (815 mm) - 4411/16” (1135 mm)
11
/16” (500 mm)
625 CFM, (Reducing Collar is available to reduce air flow to less than 400 CFM)
-
/-” W x --” H x --” D
8www.mieleusa.com
82020technologies.com
Installation Accessories:
R2000
Reducing collar limits air
ow to less than 400 CFM
DUW 20
Installation kit for
recirculation mode
DKF12-900
OdorFree Charcoal lter
required accessory for
recirculation mode
PUR 88 W
Specification Sheets TRS 08142017
Page 2 of 7
30” Wall Ventilation Hood PUR 88 W
INSTALLATION SPECIFICATIONS
PUR 88 W
Specification Sheets TRS 08142017
Page 3 of 7
30” Wall Ventilation Hood PUR 88 W
INSTALLATION SPECIFICATIONS
Mounting Details
Center unit over cooking surface
Distances “S” is determined by the cooking surface. See “Distance between cooktop and hood (S)”
dimensions.
If studs are not available in the required locations, a plywood backing (min. 1/2” (13 mmm)) MUST be used to reinforce support. Reinforcing material should be afxed to structural wall members. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.
PUR 88 W
Specification Sheets TRS 08142017
Page 4 of 7
30” Wall Ventilation Hood PUR 88 W
INSTALLATION SPECIFICATIONS
Distance Between Cooktop and Ventilation Hood (S)
PUR 88 W
Specification Sheets TRS 08142017
Page 5 of 7
30” Wall Ventilation Hood PUR 88 W
INSTALLATION SPECIFICATIONS
Recirculation Kit DUW 20
For Recirculation mode conversion kit DUW 20 is required.
PUR 88 W
Specification Sheets TRS 08142017
Page 6 of 7
30” Wall Ventilation Hood PUR 88 W
Reducing Collar
(Optional Accessory)
If you would like to reduce the enviromental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air ow to less than 400 CFM. Check local building codes for maximum CFM requirements.
Specification Sheets TRS 08142017
PUR 88 W
Page 7 of 7
Loading...