Miele CVA 6431 Operating instructions

Controls and displayImportant information

Making drinksPreparationGuide to the appliance

Cleaning and care

Using for the ﬁrst time

The coee machine must be built in and connected to the mains electricity supply before operating. Please refer to the separate Operating and installation instructions booklet.

ĺ Clean the appliance and the

cappuccinatore thoroughly before ﬁlling with water and coee capsules.

ĺ See "Setting up and using the coee

machine" in the Operating and installation instructions.

Water hardness

Programme the coee machine to the water hardness level of your area so that it functions correctly and does not get damaged. Please refer to the Operating and installation instructions for more detailed information.

 On/O sensor

  

 





 

User Proﬁles Two portions

Drink sensors Prepare

Display Information on current activity or status Settings

"Back"

Arrow sensors

OK sensor Conﬁrm display messages and save settings Maintenance

Switch appliance on and o

Save and manage User proﬁles

Dispense two portions of a drink

 Espresso  Coee  Long coee

Change settings, show or check information, see which settings are currently active

Return to the previous menu, cancel unwanted actions

Show more selection options in the display and highlight a selection

Select maintenance programmes

Operation

When the following appears in the display, you are in the drinks menu:

To prepare a drink, select a coee blend and touch one of the drink sensors.

Selecting a menu and navigating within a menu

To select a menu, touch the relevant sensor. The arrow sensors allow you to display and highlight further options. Options which are currently selected will have a tick  next to them.

If you want to select an option, touch the arrow sensors until the option you want is highlighted. Touch the OK sensor to conﬁrm your selection.

Leaving the menu or cancelling an action

To leave the current menu, touch the "Back"  sensor. If you do not touch a sensor for a period of time, the machine returns to the drinks menu.

Exterior view

a Controls and display

b Door handle

c Plastic grille

d Metal drip tray cover

e Central spout

f Inset for cappuccinatore (milk fro-

ther)

g Steam valve

Interior view

h Capsule plate

i Brew unit

j Capsule magazine

k Carousel runner

l Water container

m Drip tray with grid

n Waste container

o Central spout cover

p Drip tray inside machine door

Accessories supplied

– Cappuccinatore

Glass jug for preparing hot milk and milk froth

– Descaling funnel (red)

– Descaling tablets

– Cleaning tablets

– Maintenance tool for replacing the

capsule hopper and loosening the steam valve

CONTROLS AND DISPLAY

Filling the water container

It is important to empty and ﬁll the container with fresh tap water every day to avoid the risk of bacteria building up.

ĺ Open the appliance door and

remove the water container.

ĺ Fill the water container with

fresh, cold tap water up to the "max" marker.

Filling the capsule carousel

Important! Fill the carousel exclusively with Nespresso coee capsules.

To be able to select the types of coee in the display for dispensing, ensure you ﬁll the chambers according to the allocated type of coee. If you wish to use other types of coee, you must save these dierent types.

ĺ Pull the carousel runner out as

far as it will go.

ĺ Place the capsules in the

chambers of the carousel with the silver base facing downwards.

Making espresso or coee

ĺ Place a cup under the central spout. ĺ Use the arrow sensors to highlight the

required type of coee.

ĺ Now select the type of drink you want.

 Espresso  Coee  Long coee

The coee or espresso will be dispensed from the central spout into the cup.

Preparing a double portion

ĺ Touch . ĺ Select the type of drink you want.

Two portions of the desired drink will be dispensed from the central spout.

Cancelling preparation

You can cancel preparation while "Stop" is visible in the display.

ĺ Touch the OK sensor.

If a double portion is being prepared, a single touch of the OK sensor will only cancel the ﬁrst portion. To cancel preparation completely, touch and hold the OK sensor for longer.

GUIDE TO THE APPLIANCE / PREPARATION

Preparing hot milk, milk froth and cappuccino

Danger of burning and scalding on the steam valve. Steam and any hot water being dispensed is very hot.

 Rotary valve

 Milk spout

Turn the rotary valve either clockwise or anticlockwise as far as it will go. Steam will be emitted quite strongly if the dot on the valve is between either of these two settings.

} Hot milk (Turn the valve anti-clockwise)

{ Milk froth (Turn the valve clockwise)

You can allow the hot milk to pour into a cup or be dispensed directly into the cappuccinatore jug. To do this, the milk spout must either be pushed in or pulled out:

Milk spout is pushed in

H

Milk is dispensed into a cup. (ﬁll milk max. to the upper marker)

Milk spout is pulled out

Milk is dispensed into the cappuccinatore. (ﬁll milk max. to the lower marker)

Preparing milk froth

ĺ Select whether you want to dispense

milk froth into a cup or directly into the cappuccinatore. Fill with cold milk up to either the upper or lower marker and ﬁt the lid.

ĺ Turn the rotary valve on the

cappuccinatore clockwise all the way to {.

ĺ Place the cappuccinatore in the inset

of the drip tray. Push the steam valve down slowly until it engages in the cappuccinatore.

ĺ Push the valve back up once enough milk

has been frothed.

Preparing hot milk

ĺ Select whether you want to dispense

hot milk into a cup or directly into the cappuccinatore. Fill with cold milk up to either the upper or lower marker and ﬁt the lid.

ĺ Turn the rotary valve on the

cappuccinatore anti-clockwise all the way to }.

ĺ Place the cappuccinatore in the inset

of the drip tray. Push the steam valve down slowly until it engages in the cappuccinatore.

Tip: Heating the milk in the cappuccinatore jug gives you hotter milk.

Please refer to the Operating and installation instructions for more detailed information on cleaning and care. Clean the coee machine every day to avoid a build-up of bacteria.

Recommended time interval

Each time milk is used to make a drink, if more than one hour has passed since the last drink was made

Every day (usually at the end of the day before switching o the appliance)

Once a week (or more often if necessary)

Once a month

After approx. 15,000 drinks have been dispensed

Depending on the water hardness level in your area

The following parts must not be cleaned in a dishwasher:

– Capsule plate

– Plastic grille

– Capsule carousel and carousel runner

All other removable parts can be cleaned in a dishwasher.

MAKING DRINKS

CVA 6431 en – AU, NZ 15/13

What do I have to do?

– Rinse the lid of the cappuccinatore

– Clean the cappuccinatore

– Clean the water container

– Clean the waste container

– Clean the drip tray

– Clean the grille and the drip tray cover

– Clean the central spout cover

– Clean the capsule carousel and the carousel runner

– Clean the drip tray inside the machine door

– Clean the inside of the machine

– Clean the steam valve

– Clean the front of the machine (especially important

straight after descaling)

– Clean the capsule plate (using a cleaning tablet)

– Replace the capsule hopper

– Descale the machine when prompted to do so

M.-Nr. 09 550 140/ 00

SettingsSpecial instructionsCleaning and care Descaling

Capsule plate

Clean the capsule plate once a month with the cleaning tablets supplied or, at the latest, when the machine is descaled.

ĺ Open the appliance door.

ĺ Press on the handle  and pull out the

capsule plate.

ĺ Fill a small container with hot water and

dissolve one cleaning tablet in it.

ĺ Place the capsule plate in the cleaning

solution and leave for approx. one hour.

ĺ Once all the coee grounds have

been removed, rinse the capsule plate thoroughly and dry it.

ĺ Push the capsule plate back into the

machine until it clicks into place.

Cappuccinatore

The lid of the cappuccinatore can be dismantled for cleaning. It is best to clean the cappuccinatore in the dishwasher if possible - all parts are dishwasher-safe.

ĺ Dismantle the cappuccinatore lid.

Remove the spout and the rotary valve.

The rotary valve can only be pulled out if the dot is set between the symbols for hot milk } and milk froth {.

ĺ After cleaning, reassemble the lid of the

cappuccinatore as shown in the picture.

Important! Spillages and splashes of descaling agent may cause damage to the front of the coee machine or surrounding surfaces, such as worktops or wooden ﬂooring. To protect the machine and surrounding surfaces from damage, make sure you wipe up any spillages or splashes of descaling agent immediately.

Only use the Original Miele descaling tablets supplied with the appliance. Other descaling tablets may damage the appliance and aect the taste of the coee.

The descaling programme takes approx. 12 minutes. To descale the coee machine, you will need

– the red descaling funnel and

– the Original Miele descaling tablets (2

tablets per programme).

The descaling programme cannot be cancelled once it has started. It must be completed through to the end.

ĺ Touch. Select "Descale" and conﬁrm

with OK.

The descaling programme will begin.

ĺ Follow the instructions in the display. ĺ Fill the water container to the marker

 with lukewarm water and drop two descaling tablets in the water. Push the water container back into the appliance.

Ensure that you adhere to the mixing ratio for the descaling tablets. It is important that you do not ﬁll the water container with more or less water than prescribed. The descaling programme will otherwise be cancelled prematurely and will need to be repeated.

When "Remove capsule plate. Insert descaling funnel and close the door" appears in the display:

ĺ Remove the capsule plate and insert the

red descaling funnel.

Tip: Place the waste container under the central spout and steam valve.

When "Rinse the water container and ﬁll with fresh tap water up to the descaling symbol " appears in the display:

ĺ Carefully rinse the water container with

clean tap water.

Ensure that no descaling solution residue remains in the water container.

Descaling has ﬁnished when "Empty the drip tray and clean the contacts. Process ﬁnished" appears in the display.

Allocating types of coee (Type allocation)

You can store ﬁve dierent types of coee in this machine. When the coee machine is switched on and the carousel runner is pulled out, the type of coee in the chambers is shown in the display.

Selecting coee type allocation

ĺ Touch  and use the arrow sensors to

highlight "Type allocation".

ĺ Select the required chamber.

For this chamber, you can now:

Select type

The tick  indicates which type of coee is allocated for this chamber at the present time.

Allocating a type of coee

Enter characters

Save your entry

Delete characters

If you have already allocated types of coee, you can change (Change type) or delete (Delete type) them.

Highlight with the arrow sensors + OK

 sensor

Changing the portion size

ĺ Touch and hold the sensor for the desired

drink until "Change" appears in the display;

ĺ Touch . Select "Portion size" and

conﬁrm with OK.

ĺ Use the arrow sensors to highlight the

required drink and conﬁrm with OK.

The desired drink will be dispensed and "Save" will appear in the display.

When the cup is ﬁlled to the level you want,

ĺ touch the OK sensor.

You can cancel portion size programming while "Stop" is visible in the display.

User proﬁles

You can set up User proﬁles in your coee machine and save individual portion sizes for espresso, coee or long coee.

The name of the current User proﬁle is shown in the top left of the display.

Calling up User proﬁles

ĺ Touch .

The  sensor will light up.

Creating a User proﬁle

Enter characters

Save your entry

Delete characters

If you have allocated a proﬁle in addition to the Miele standard proﬁle, you have the option to:

– Select proﬁle

– Change name

– Delete proﬁle

– Change proﬁle

(You can choose whether User proﬁles are changed manually, after a drink is dispensed, or when the machine is switched on.)

Highlight with the arrow sensors + OK

 sensor

Changing settings

ĺ Touch . ĺ Select the required setting with the arrow

sensors and conﬁrm with OK.

The tick  indicates which setting is currently active.

Menu option Available settings Notes

Language deutsch, and other languages

Country

Set the date Year / Month / Day

Time of day Display (O / On / Night dimming)

Clock format (12 h / 24 h) Set

Timer Timer 1 (Switch on at / Switch o at / Switch

o after) Timer 2 (Switch on at / Switch o at)

Type allocation Chambers 1-5 (Select type / Allocate type /

Change type* / Delete type*)

Portion size Espresso

Coee Long coee

Eco mode On / O

Lighting Brightness (Appliance switched on or switched

o) Switch o after

Info Number of drinks / No. of portions until

descaling

System lock On / O When the system lock is activated, the "Switch on at" option for the timer cannot be selected.

Water hardness Soft / Medium / Hard / Very hard

Display brightness Set

Volume Buzzer tones

Keypad tone

Showroom programme Demo mode (On / O) This function is intended for presenting the appliance in Miele Galleries or retail stores. Do not activate this

Factory default settings Reset

ĺ Change the setting using the arrow

sensors.

ĺ Touch the OK sensor to save the setting.

Touching  takes you back to the previous menu.

The "Language" option can be found via the ﬂag symbol .

Depending on which option you select, the machine may use more energy. A message appears in the display to inform you of this.

For "Switch on at" and "Switch o at" to be set, the timer must be activated and at least one day of the week must be allocated.

* Your own types of coee can only be changed or deleted if these have already been programmed into the machine.

Touch the  arrow sensor until all of the segments are empty, and "Switched o" appears in the display.

To switch o the tones, touch the  arrow sensor until all of the segments are empty and "Switched

off" appears in the display.

function for domestic use.

Quick Start Guide Built-in coee machine

These short instructions are not a substitute for the Operating and installation instructions booklet supplied with your coee machine. Please read the Operating and installation instructions booklet supplied with your machine before using it for the ﬁrst time and take note of the Warning and Safety instructions, as well as the full descriptions on how to use your machine.

CLEANING AND CARE / DESCALING

SPECIAL INSTRUCTIONS

en - AU, NZ

SETTINGS

M.-Nr. 09 550 140