RMK8004UD Installation Instructions
Rack Mount Kit for the UD8004 Blu-Ray Disc Player
RMK8004UD rack mount kit includes:
Left side rack bracket
Right side rack bracket
Lower front finishing panel
4 front panel fastening screws
1. On the unit, remove the left and right side screws (Figure A).
***Warning: Do not remove the cover of the unit***
2.Position the right side bracket on the right side of the unit so the holes on the bracket line up with the corresponding holes on the unit.
3.Attach the bracket to the unit using the same screws that were removed (Figure B).
4.Repeat step 2 and step 3 for the left side bracket (Figure B).
5.Mount the lower finishing panel between the left and right side brackets (Figure C).
6.Install fastening screws to secure lower finishing panel (Figure C).
7.The component is now ready to be secured to the frame rails of the equipment rack in accordance to the manufactures instructions.
Figure A
Figure B
Figure C
Marantz America, Inc. 100 Corporate Dr., Mahwah, NJ 07430 (201) 762-6500 www.marantz.com
Loading...