Logitech MX Anywhere 3 QUICK SETUP

Getting Started

QUICK SETUP Go to the interactive setup guide for quick interactive setup instructions.

If you want more in-depth information, go to the Detailed Setup below.

DETAILED SETUP

1. Make sure the mouse is turned on.

The On/Off switch is located on the bottom of the mouse.

The number 1 LED on the bottom of the mouse should be blinking fast. NOTE: If the LED is not blinking fast, do a long press of three seconds on the Easy-Switch button on the mouse bottom.

2. There are two ways you can connect your mouse:

o Use the wireless USB receiver

Plug the receiver into a USB port on your computer.

o Connect directly via Bluetooth

Open the Bluetooth settings on your computer to complete the pairing. Search for new devices and click on MX Anywhere 3 to connect. Click here for more details on how to do this on your computer. If you experience issues with Bluetooth, click here for Bluetooth troubleshooting.

3. Install Logitech Options Software.

Download Logitech Options to customize your mouse and benefit from advanced shortcuts and all the possibilities this mouse has to offer. To download and learn more about the full range of features, go to logitech.com/options.

LEARN MORE ABOUT YOUR PRODUCT

Product Overview

1. MagSpeed scroll wheel

2. Mode shift button for the scroll wheel — shift between line-by-line scrolling and free-spinning

3. Battery status LED

4. Silicone side grips

5. USB-C charging port

6. On/Off button

7. Darkfield 4000DPI sensor

8. Easy-Switch and connect button

9. Back/Forward buttons

YOU CAN PAIR TO A SECOND COMPUTER WITH EASY-SWITCH

Your mouse can be paired with up to three different computers using the Easy-Switch button to change the channel.

1. A short press on the Easy-Switch button will let you switch channels (from one computer to

another). Select the channel you want and go to the next step.

2. Press and hold the Easy-Switch button for three seconds. This will put the mouse in discoverable

mode so that it can be seen by your computer. The LED will start blinking fast.

3. Choose how you want to connect your mouse to your computer, Bluetooth, or USB:

o Bluetooth: Open the Bluetooth settings on your computer to complete the pairing.

More details here.

o USB receiver: Plug the receiver into a USB port, open Logitech Options, and select: Add

devices > Setup Unifying device, then follow the instructions.

MagSpeed adaptive scroll-wheel with SmartShift

The speed-adaptive scroll wheel shifts between two scrolling modes automatically. As you scroll faster, it will automatically shift from line-by-line scrolling to free-spinning.

 Line-by-line (ratchet) mode — ideal for precise navigation of items and lists.  Hyper-fast (free-spin) mode — near-frictionless spinning, letting you fly through long documents

and web pages.

Switch modes manually

You can also manually switch between modes by pressing the mode shift button.

By default, mode shift is assigned to the button on top of the mouse.

In Logitech Options software, you can decide to disable SmartShift if you prefer to stay in one scrolling mode and always shift manually. You can also adjust the SmartShift sensitivity, which will change the speed required to automatically shift into free spinning.

+ 8 hidden pages