Getting started with
Première utilisation
BH970 Wireless Mono DECT Headset
Logitech for Business
BH970 Wireless Mono DECT Headset
Contents
English. . . . . . . . . . . . . . . . . . . . . . . . . . 4
www.logitech.com/support/BH970 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 25
2
Français. . . . . . . . . . . . . . . . . . . . . . . . . 14
BH970 Wireless Mono DECT Headset
Getting started with
Première utilisation
BH970 Wireless Mono DECT Headset
Logitech for Business
3
BH970 Wireless Mono DECT Headset
1
2
3
5
7
6
4
Figure 1: BH970 Wireless Mono DECT Headset diagrams
8
1 3
2
4 7 8 9 10111265
Figure 2: BH970 Wireless Mono DECT base diagrams
44 English
14
13
Headset.diagrams
1. Multifunction button
2. Touch panel
3. LED indicator
4. Microphone boom arm
5. Speaker
6. Mount for wearing-style attachments
7. Recharge contact
8. Noise-cancelling microphone
BH970 Wireless Mono DECT Headset
Base.diagrams
1. Headset recharge contact
2. Headset cradle
3. Keypad
4. Microphone volume control
5. Cear dial tone switch
6. Front panel
7. Telephone port
8. Handset port
9. AUX port
10. USB port
11. Power adapter port
12. Busy-light indicator port
13. Speaker
14. Security slot
5English 5
BH970 Wireless Mono DECT Headset
Setup
Step 1: Select your setup method
www.logitech.com/support/BH970
Step 2: Select and prepare the
Headset
66 English
The easiest way to connect and configure
the BH970 is to use the Interactive Setup
Wizard available online here: www.logitech.
com/support/BH970. The setup section of
this quick start guide is only needed if the
Interactive Setup Wizard is not used.
Attaching the headband
OR
1. Align the headset and the headband
wearing-style attachment, as illustrated,
and press firmly together until they click
into place (snap-to-click).
2. Rotate the microphone boom arm for
left or right ear use.
3. Adjust the length of the headband to fit
snug against the head.
Attaching the earhook
OR
1. Assemble the earhook wearing-style
attachment for left or right ear use.
If necessary, remove the earbud and
replace with another size for best fit.
2. Align the headset and the earhook
wearing-style attachment, as illustrated,
and press firmly together until they click
into place (snap-to-click).
3. Shape the earhook to fit snug around
the ear.
Step 3: Connect to power
BH970 Wireless Mono DECT Headset
1. Plug the supplied power adapter into the
port marked on the base.
2. Connect the power adapter to the mains
power socket.
Step 4: Dock the Headset
Step 5: Connect to PC
Dock the headset. When docked correctly
the headset battery will begin charging,
if needed.
Charge for 20 minutes or until battery
indicator is steady green. Keep the headset
docked during setup.
1. Plug the supplied USB cable into the
port marked on the base.
2. Connect the USB cable to any free USB
slot on the PC.
7English 7
BH970 Wireless Mono DECT Headset
Step 6: Select and connect to a desk
phone
Connecting to a desk phone will vary
depending on the type of desk phone used.
88 English
Connect to a desk phone with
OR
headset port
This type of desk phone has a dedicated
headset port (usually at the back of the
phone). These phones typically have a
button on the front panel for switching
between handset and headset.
1. Plug the supplied telephone cable into
the port marked on the base.
2. Connect the telephone cable to the
headset port on the desk phone.
Connect to a desk phone without
OR
headset port
This desk phone does not have a dedicated
headset port.
1. On the desk phone, unplug the handset
cable from the phone body.
2. Connect the handset cable to the port
marked on the base.
3. Plug the supplied telephone cable into
the port marked on the base.
4. Connect the telephone cable into the
handset port on the desk phone.
Loading...