Mining Truck |
T 284 |
Gross Vehicle Weight (GVW): 600 t / 661 ton
Nominal payload: 363 t / 400 ton
Empty Vehicle Weight (EVW): 237 t / 261 ton
T 284
Gross Vehicle Weight (GVW): 600 t / 661 ton Nominal payload: 363 t / 400 ton Empty Vehicle Weight (EVW): 237 t / 261 ton
2T 284
Productivity
Liebherr Mining Equipment enables superior productivity by loading and hauling maximum tonnage in the shortest amount of time.
Efficiency
Liebherr combines the proven capabilities of previous models with new features that improve operational efficiency.
Customer Support
Liebherr builds more than just mining equipment; Liebherr also builds customer partnerships.
Safety
Mining demands an ever-vigilant focus on safety, and Liebherr strictly adheres to industry standards. Liebherr equipment is designed to diminish risk even under the most extreme mining conditions.
Reliability
To maximize equipment reliability, Liebherr combines manufacturing expertise with superior monitoring and diagnostic capabilities.
Environment
Liebherr optimizes mining equipment for fuel economy, emission compliance, and extended service intervals.
T 284 3
Multiple loading tools
Liebherr mining trucks are designed to match large electric shovels and wheel loaders. The T 284 is suited for both the Liebherr R 9800 and the R 996 B hydraulic excavator. This combination of machines makes for a complete Liebherr solution.
4T 284
Productivity
By maximizing payload while minimizing cycle time, Liebherr high-horsepower equipment moves more tons per hour.
Largest payload
Ultra class trucks have proven to be a more productive means of moving material. As the designer and manufacturer of the first 400 ton (363 t) mining truck, Liebherr has been at the forefront of this successful industry solution. By hauling more per cycle, the T 284 allows Customers to maximize the return on their investment and to meet production targets with fewer trucks or in less time.
Unmatched performance
The combination of the T 284’s efficient Litronic Plus AC drive system, its highpower (up to 3,000 kW / 4,023 HP) engine, and low gross vehicle weight leads to fast haul cycle times with higher speeds on grade if compared to other trucks in its class.
Flexible engine options
The T 284 supports multiple engine options with power ratings up to 3,000 kW (4,023 HP). With application-specific recommendations from Liebherr, Customers are able to select the engine that will allow the truck to meet productivity targets while minimizing fuel consumption.
Drivability
Liebherr is committed to designing mining trucks that operators want to drive. The T 284 fulfills this commitment and promotes driver efficiency with its superior comfort, acceleration and handling.
Lightweight design
Liebherr’s trademark low EVW is achieved by utilizing an electric drive system combined with a lightweight frame. Hauling the largest available payload with a lighter truck maximizes Customer productivity.
T 284 5
Wheel motors
The T 284’s AC induction motors efficiently convert electrical power into mechanical torque. Fewer electrical losses translate into higher rimpull forces for faster cycle times and increased fuel economy.
6T 284
Efficiency
Efficiency is a key ingredient for a successful mining operation. Liebherr mining equipment enables Customers to enjoy unrivaled performance while reducing cost per ton.
Litronic Plus technology
Developed and built by Liebherr, the proven Litronic Plus drive system determines the optimal way to extract power from the diesel engine. Efficient loading of the engine is critical to minimize fuel consumption and maximize performance.
Intelligent power usage
Engine power usage is optimized by running auxiliary components such as pumps, fans and motors only when needed. Fuel is conserved when the engine is idling and more power is available to accelerate the truck and climb grades when necessary.
Long life components
Components are built to perform in the most extreme mining conditions in order to allow more time between overhauls and to reach their maximum operational life.
Engine / Fuel system
The T 284 offers reliable engine options with the latest fuel injection technology for cleaner combustion and reduced fuel consumption. Customers can expect reduced maintenance and lower fuel costs.
T 284 7
Frame
The T 284’s frame is designed according to international weld fatigue guidelines, and is fabricated according to American Welding Society standards. This steel structure includes cast components in strategic areas and hollow box rails with fully welded internal stiffeners. These choices ensure a durable, lightweight frame.
8T 284
Loading...