Page 1
Design Guide
Page 2
2 3
Page 3
4 5
Page 4
6 7
Page 5
The next generation of home refrigeration
is here. Introducing Monolith, a towering
achievement in cooling technology from
Liebherr. Monolith is the culmination of
Liebherr’s 60 years of refrigeration innovation and expertise. An impressive 84"
from top to bottom, this monumental
wonder of German engineering takes
food preservation to a new level. With
superior energy effi ciency and foodsaving advancements such as BioFresh-Plus,
PowerCooling and our SmartDeviceBox,
Monolith is a fusion of technical genius
and practical ingenuity. Add Liebherr’s
exclusive Infi nitySwipe electronic touchcontrol panel and smartphone app,
whisper-quiet operation and infi nite
fi nishes and size confi gurations to match
your décor, and you can see why
Monolith isn’t just state-of-the-art. It’s the
new defi nition of cool.
8 9
Page 6
Columns Overview
10 11
MRB 2400
Stainless steel panelRight, reversible Custom panel
MRB 3000
Model
Door Hinge
Panel Features
Refrigerator
Stainless steel panel
Right, reversible Custom panel
24"
30"
MRB 3600
MF 1851
MF 2451
MF 3051
MF 3651
Stainless steel panel
Right, reversible Custom panel
Stainless steel panel
Custom panel
Left, reversible
Stainless steel panel
Stainless steel panel
Stainless steel panel
Custom panel
Custom panel
Custom panel
Left, reversible
Left, reversible
Left, reversible
36"
18 "
24"
30"
36"
Freezer
Monolith columns off er limitless combinations for your dream kitchen. These appliances can be installed as single columns,
or in combinations of two and three appliances to maximize your storage options. See popular combinations listed below.
Side-by-Side Combinations
42-Inch
MF 1851
Freezer
MRB 2400
Refrigerator
18 " 24"
48-Inch
MF 2451
Freezer
MRB 2400
Refrigerator
24" 24"
MF 1851
Freezer
MRB 3000
Refrigerator
18 " 30"
54-Inch 60-Inch
MF 2451
Freezer
MRB 3000
Refrigerator
24" 30"
MF 3051
Freezer
MRB 3000
Refrigerator
30" 30"
MF 2451
Freezer
MRB 3600
Refrigerator
24" 36"
72-Inch
MF 3651
Freezer
MRB 3600
Refrigerator
36" 36"
Page 7
COOLING
12 13
Page 8
Key Features
InfinitySwipe: Monolith’s intuitive electronic
touch-control panel features a full-color 3.5-inch
touch & swipe screen that’s bright, clean, and
wonderfully user-friendly. You’ll barely have to
lift a finger to control every function.
InfinitySpring: The seamlessly integrated, flushmounted InfinitySpring internal water dispenser
is there when you need it, and virtually invisible
when you don’t, and can accommodate pitchers
of any size. Liebherr’s filtration system eliminates
harmful contaminates, resulting in crisp, clear, fresh
tasting water.
PowerCooling: Liebherr’s high-performance
PowerCooling system ensures that newly stored
foods are quickly cooled, while maintaining an
even temperature throughout the interior. Taking
this system one step further, Monolith circulates
cold air behind the door, meaning that items
stored in the door stay just as cold as everything
else inside.
InfinityLight: Monolith’s seamlessly integrated
LED side-wall lighting casts a beautiful and even
glow that can be adjusted according to taste,
including a soft brightening effect upon opening
the doors. InfinityLight doesn’t just add drama
and flair, it also emits less heat, preserving food
quality.
Gallon Storage: Monolith’s durable and
elegant door shelves provide more cubic feet
and convenience. Store gallon jugs of tea,
juice and milk on the door, freeing up the
refrigerator’s interior shelves for everything from
party platters to fresh salad bowls.
SmartDevice: Monolith comes with a
SmartDeviceBox which can be controlled via
a smartphone or tablet, activating settings
and features while on the go. In the future
SmartDevice can also help you become a
better chef by using
internal cameras to tell you
what items you’ll need
for a recipe, and voice
recognition to order what you’re missing.
BioFresh: BioFresh is an advanced food preservation system featuring independent climate
controls, where you can create a high-humidity
environment for fruits and veggies in one drawer,
and a low-humidity environment for meats and
cheeses in another. FlexSystem: This simple-to-
use organization system helps sort and separate
foods stored in your favorite BioFresh drawer.
BioFresh-Plus: Liebherr’s BioFresh technology
guarantees the perfect climate for superior,
long-lasting food freshness. In addition to two
BioFresh drawers, the third Monolith refrigerator
drawer can be set as BioFresh-Plus, lowering
temperatures down to 28 ºF, ideal for storing
fresh fish and seafood.
14 15
Page 9
A
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
B
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
C
This surface is visible when the appliance door is open.
Designed finish is required.
Inset
A = 10 3/4" (273 mm)
B = 1/2" (12.5 mm)
C = 25 7/8" (658 mm)
Frameless
A = 11" (279 mm)
B = 1/2" (12.5 mm)
C = 26 3/8" (670 mm)
Dimension A = without
mounted door handle
24" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 23 3/4" (603 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 24" (610 mm) Add overlapping
dimension to the panel on both sides.
Maximum panel weight = 52 lbs. (24 kg)
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjustable feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
24" Monolith Refrigerator
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 34–35 for available accessories.
Individual Toe Kick
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
Cut out Dimensions
Door Panel Dimensions
Product Dimensions
16 17
24"
Continuous Toe Kick
MRB 2400
230
28 *
39 **
11.5 (325 )
5.0 (142)
4
3
2 / 1 with LED lighting
InfinitySwipe
+36 °F to +45 °F (+2 °C to +7 °C)
automatic
InfinityLight
no
no
right, reversible ***
83 3/4" / 23 3/4" / 24"
212.6 / 60.2 / 61
84" / 24" / 25"
213.4 / 61 / 63.5
335.1 (152.0)
115/6 0
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Refrigerator capacity cu.ft. (l)
BioFresh / BioFresh-Plus comp. cu.ft. (l)
Number of shelves
Number of door racks
Number of BioFresh drawers / BioFresh-Plus drawers
Electronic control
Refrigerator temperature range °F (°C)
Defrost type
Interior light
Internal Water Dispenser
Water fi lter
Door hinges
Product dimensions
in inch H / W / D
in cm H / W / D
Cut out dimensions
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
Page 10
30" Monolith Refrigerator
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 34–35 for available accessories.
Inset
A = 13 1/4" (337 mm)
B = 1/2" (12.5 mm)
C = 31 7/8" (810 mm)
Frameless
A = 13 1/2" (343 mm)
B = 1/2" (12.5 mm)
C = 32 3/8" (822 mm)
Dimension A = without
mounted door handle
30" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 29 3/4" (756 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 30" (762 mm) Add overlapping
dimension to the panel on both sides.
Maximum panel weight = 79 lbs. (36 kg)
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
18 19
30"
Door Panel Dimensions
Product Dimensions
MRB 3000
A
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
B
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
C
This surface is visible when the appliance door is open.
Designed finish is required.
Individual Toe Kick
Cut out Dimensions
Continuous Toe Kick
245
30 *
39 **
15.0 (4 25 )
6.5 (185)
4
3
2 / 1 with LED lighting
InfinitySwipe
+36 °F to +45 °F (+2 °C to +7 °C)
automatic
InfinityLight
InfinitySpring
yes
right, reversible ***
83 3/4" / 29 11/16" / 24"
212.6 / 75.4 / 61
84" / 30" / 25"
213.4 / 76.2 / 63.5
394.6 (179.0)
115/6 0
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Refrigerator capacity cu.ft. (l)
BioFresh / BioFresh-Plus comp. cu.ft. (l)
Number of shelves
Number of door racks
Number of BioFresh drawers / BioFresh-Plus drawers
Electronic control
Refrigerator temperature range °F (°C)
Defrost type
Interior light
Internal Water Dispenser
Water fi lter
Door hinges
Product dimensions
in inch H / W / D
in cm H / W / D
Cut out dimensions
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
Page 11
36" Monolith Refrigerator
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 34–35 for available accessories.
MRB 3600
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
20 21
36"
Inset
A = 15 3/4" (400 mm)
B = 1/2" (12.5 mm)
C = 37 7/8" (962 mm)
Frameless
A = 16" (416 mm)
B = 1/2" (12.5 mm)
C = 38 3/8" (975 mm)
Dimension A = without
mounted door handle
36" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 35 3/4" (908 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 36" (914 mm) Add overlapping
dimension to the panel on both sides.
Maximum panel weight = 79 lbs. (36 kg)
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Door Panel Dimensions
Product Dimensions
A
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
B
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
C
This surface is visible when the appliance door is open.
Designed finish is required.
Individual Toe Kick
Cut out Dimensions
Continuous Toe Kick
325
39 *
39 **
18.9 (53 5)
8.3 (236)
4
3
2 / 1 with LED lighting
InfinitySwipe
+36 °F to +45 °F (+2 °C to +7 °C)
automatic
InfinityLight
InfinitySpring
yes
right, reversible ***
83 3/4" / 35 13/16" / 24"
212.6 / 90.9 / 61
84" / 36" / 25"
213.4 / 91 / 63.5
385.8 (175.0)
115/6 0
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Refrigerator capacity cu.ft. (l)
BioFresh / BioFresh-Plus comp. cu.ft. (l)
Number of shelves
Number of door racks
Number of BioFresh drawers / BioFresh-Plus drawers
Electronic control
Refrigerator temperature range °F (°C)
Defrost type
Interior light
Internal Water Dispenser
Water fi lter
Door hinges
Product dimensions
in inch H / W / D
in cm H / W / D
Cut out dimensions
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
Page 12
FREEZING
22 23
Page 13
Key Features
SoftSystem: Doors close automatically and gently
thanks to our SoftSystem technology, which
eliminates slamming even when shelves are fully
loaded. Depending on which size
Monolith
you choose, the door hinges are rated for up to
79 pounds.
InfinityLight: Monolith’s seamlessly integrated
LED side-wall lighting casts a beautiful and even
glow that can be adjusted according to taste,
including a soft brightening effect upon opening
the doors. InfinityLight doesn’t just add drama
and flair, it also emits less heat, preserving food
quality.
FrostSafe Drawers: Monolith’s FrostSafe sealed
removable freezer drawers protect frozen food
from unwanted air exchange and chilled air
loss, even when the door is opened. FrostSafe
drawers are also generously deep and
trans parent, providing an optimum view of
what’s stored within.
SuperFrost: Simply quick freeze just-bought
groceries to preserve optimum food freshness,
while sealing in flavors and maintaining essential
vitamins and minerals.
Freezer Door Bins: With their unique design, Monolith’s durable freezer door bins allows cold air to flow freely,
keeping temperature constant while optimizing food preservation. The see-through door bins are also fully adjustable,
easily accommodating small to medium-sized items so that inner freezer shelves are free to accommodate bulkier
foods.
IceMaker: Monolith’s automatic IceMaker
produces 3.5 pounds of filtered ice in 24 hours.
Activate the SuperFrost function for an even
greater production capability. With a 4-pound
storage capacity, you’ll never be without.
24 25
Page 14
18" Monolith Freezer
18" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 17 3/4" (451 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W =18" (457 mm) Add overlapping
dimension to the panel on both sides.
Maximum panel weight = 52 lbs. (24 kg)
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 34–35 for available accessories.
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
26 27
18 "
Door Panel Dimensions
Product Dimensions
Inset
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 19 7/8" (505 mm)
Frameless
A = 8 1/2" (216 mm)
B = 1/2" (12.5 mm)
C = 20 3/8" (517 mm)
Dimension A = without
mounted door handle
MF 1851
A
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
B
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
C
This surface is visible when the appliance door is open.
Designed finish is required.
Individual Toe Kick
Cut out Dimensions
Continuous Toe Kick
412
50 *
39 **
7.8 (222)
4
3
3
InfinitySwipe
+7 °F to –17 °F (–14 °C to –27 °C)
automatic
InfinityLight
yes
fixed water connection
3.5 (1.6)
4.0 (1.8)
left, reversible ***
83 3/4" / 17 3/4" / 24"
212.6 / 45 / 61
84" / 18" / 25"
213.4 / 45.7 / 63.5
302.0 (137.0)
115/6 0
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of FrostSafe drawers
Electronic control
Freezer temperature range °F (°C)
Defrost type
Interior light
Water fi lter
IceMaker
Ice cube output lbs. (kg) / 24h
Ice cube stock lbs. (kg)
Door hinges
Product dimensions
in inch H / W / D
in cm H / W / D
Cut out dimensions
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
Page 15
24"
24" Monolith Freezer
Inset
A = 10 3/4" (273 mm)
B = 1/2" (12.5 mm)
C = 25 7/8" (658 mm)
Frameless
A = 11" (279 mm)
B = 1/2" (12.5 mm)
C = 26 3/8" (670 mm)
Dimension A = without
mounted door handle
24" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 23 3/4" (603 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 24" (610 mm) Add overlapping
dimension to the panel on both sides.
Maximum panel weight = 52 lbs. (24 kg)
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 34–35 for available accessories.
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
28 29
Door Panel Dimensions
Product Dimensions
MF 2451
A
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
B
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
C
This surface is visible when the appliance door is open.
Designed finish is required.
Individual Toe Kick
Cut out Dimensions
Continuous Toe Kick
438
53 *
39 **
11.5 (325 )
4
3
3
InfinitySwipe
+7 °F to –17 °F (–14 °C to –27 °C)
automatic
InfinityLight
yes
fixed water connection
3.5 (1.6)
4.0 (1.8)
left, reversible ***
83 3/4" / 23 3/4" / 24"
212.6 / 60.2 / 61
84" / 24" / 25"
213.4 / 61 / 63.5
346.1 (157.0)
115/6 0
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of FrostSafe drawers
Electronic control
Freezer temperature range °F (°C)
Defrost type
Interior light
Water fi lter
IceMaker
Ice cube output lbs. (kg) / 24h
Ice cube stock lbs. (kg)
Door hinges
Product dimensions
in inch H / W / D
in cm H / W / D
Cut out dimensions
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
Page 16
30" Monolith Freezer
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 34–35 for available accessories.
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
30 31
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Door Panel Dimensions
Product Dimensions
30"
Inset
A = 13 1/4" (337 mm)
B = 1/2" (12.5 mm)
C = 31 7/8" (810 mm)
Frameless
A = 13 1/2" (343 mm)
B = 1/2" (12.5 mm)
C = 32 3/8" (822 mm)
Dimension A = without
mounted door handle
30" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 29 3/4" (756 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 30" (762 mm) Add overlapping
dimension to the panel on both sides.
Maximum panel weight = 79 lbs. (36 kg)
MF 3051
A
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
B
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
C
This surface is visible when the appliance door is open.
Designed finish is required.
Individual Toe Kick
Cut out Dimensions
Continuous Toe Kick
529
64 *
39 **
15.2 (431)
4
3
3
InfinitySwipe
+7 °F to –17 °F (–14 °C to –27 °C)
automatic
InfinityLight
yes
fixed water connection
3.5 (1.6)
4.0 (1.8)
left, reversible ***
83 3/4" / 29 13/16" / 24"
212.6 / 75.6 / 61
84" / 30" / 25"
213.4 / 76 / 63.5
354.9 (161.0)
115/6 0
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of FrostSafe drawers
Electronic control
Freezer temperature range °F (°C)
Defrost type
Interior light
Water fi lter
IceMaker
Ice cube output lbs. (kg) / 24h
Ice cube stock lbs. (kg)
Door hinges
Product dimensions
in inch H / W / D
in cm H / W / D
Cut out dimensions
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
Page 17
36" Monolith Freezer
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 34–35 for available accessories.
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
32 33
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Door Panel Dimensions
Product Dimensions
Inset
A = 15 3/4" (400 mm)
B = 1/2" (12.5 mm)
C = 37 7/8" (962 mm)
Frameless
A = 16" (416 mm)
B = 1/2" (12.5 mm)
C = 38 3/8" (975 mm)
Dimension A = without
mounted door handle
36" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 35 3/4" (908 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 36" (914 mm) Add overlapping
dimension to the panel on both sides.
Maximum panel weight = 79 lbs. (36 kg)
36"
MF 3651
A
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
B
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
C
This surface is visible when the appliance door is open.
Designed finish is required.
Individual Toe Kick
Cut out Dimensions
Continuous Toe Kick
586
71 *
39 **
18.9 (53 4)
4
3
3
InfinitySwipe
+7 °F to –17 °F (–14 °C to –27 °C)
automatic
InfinityLight
yes
fixed water connection
3.5 (1.6)
4.0 (1.8)
left, reversible ***
83 3/4" / 35 13/16" / 24"
212.6 / 90.9 / 61
84" / 36" / 25"
213.4 / 91 / 63.5
385.8 (175.0)
115/6 0
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of FrostSafe drawers
Electronic control
Freezer temperature range °F (°C)
Defrost type
Interior light
Water fi lter
IceMaker
Ice cube output lbs. (kg) / 24h
Ice cube stock lbs. (kg)
Door hinges
Product dimensions
in inch H / W / D
in cm H / W / D
Cut out dimensions
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
Page 18
Monolith Accessories
Stainless steel Door Panel
01
18" 9901 916
24" 9901 883
30" 9901 872
36" 9901 458
34 35
Stainless steel Toe Kick
05
18" 9901 493
24" 9901 496
30" 9901 530
36" 9902 349
42" 9901 552
48" 9901 765
54" 9901 787
60" 9902 366
72" 9902 390
Available for all Monolith models 9901 428
Side-by-Side kit
06
The Side-by-Side kit includes a side wall heater to prevent condensation, metal brackets with screws, and a finishing strip to fill the gap
between the appliances.
Fastening screws are provided. The distance between the two screw
holes is 30 5/16" (770 mm).
Monolith stainless steel round handle
04
Available for all Monolith models 9901 489
02 03 04
18 " 24" 30" 36"
Monolith brushed aluminum square handle
02
Available for all Monolith models 9901 461
Fastening screws are provided. The distance between the two screw
holes is 30 5/16" (770 mm).
Monolith brushed aluminum soft-edge handle
03
Available for all Monolith models 9901 492
Fastening screws are provided. The distance between the two screw
holes is 30 5/16" (770 mm).
Page 19
Planning Information
Area Requirements
Verify the following:
• Floors can support appliance’s weight plus approximately
1200 pounds (544 kg) of food weight.
• Finished kitchen fl oor height is level. Refrigerator must be
shimmed to the fl oor level or leveled to make sure air vents
are not obstructed.
• Remove anything attached to the rear or side walls that
can obstruct appliance opening.
• Cut out dimensions are accurate.
• Electrical outlet is in correct location.
Do not install this unit next to any other refrigerator or freezer
except another Liebherr model. Liebherr models are designed to
allow for Side-by-Side installation. They are equipped with a
heating system to eliminate condensation when units are installed
Side-by-Side. Installing this unit next to any other refrigerator
or freezer can cause condensation or cause damage to the
Liebherr unit.
IMPORTANT
To protect the refrigerator from possible damage, allow the
appliance to stand 1 hour in place before turning the electricity
on. This allows the refrigerant and lubrication system to reach
equilibrium.
Blocking For Safety
The anti-tipping bracket must be installed to prevent the unit
from tipping after it is installed. Refer to chapter “Blocking
For Safety” in the installation instructions.
Safety Regulations
The appliances are designed to cool, freeze, store food as well
as make ice (if equipped).
The appliances are manufactured to operate within specifi c
ambient temperature limits according to its climate rating.
The climate rating indicates the ambient temperature at which
the appliance may be operated in order to deliver optimal
refrigeration performance.
The climate rating for Monolith columns is SN-T.
IMPORTANT
Do not operate the appliance outside the specifi ed ambient
temperature range.
• Refrigerant circuits are tested for leaks.
• The appliances complies with current safety regulations
CAN/CSA C22.2 No.60335-1-11
UL 60335-1 Fifth Edition
CAN/CSA C22.2 No. 60335-2-24 - 06
UL 60335-2-24 First Edition
Climate Rating Ambient Temperature
SN 50 °F to 90 °F (10 °C to 32 °C)
N 61 °F to 90 °F (16 °C to 32 °C)
ST 61 °F to 100 °F (16 °C to 38 °C)
T 61 °F to 109 °F (16 °C to 43 °C)
SN-ST 50 °F to 100 °F (10 °C to 38 °C)
SN-T 50 °F to 109 °F (10 °C to 43 °C)
Electrical Requirements & Safety
A 15 amp or 20 amp, 110-120 VAC, circuit which is grounded
and protected by a circuit breaker or fuse is required.
We recommend using a dedicated circuit for each appliance
to prevent circuit overload and the chance of interruption to the
appliance.
The appliances are equipped with a three-prong (grounding)
polarized plug for protection against possible shock hazards.
The power plug must be easily accessible so that the appliance
can be disconnected quickly in an emergency. It should not be
behind the appliance. In case the plug must to be located
behind the appliance, we recommend the receptacle located
a maximum of 6" from the fl oor.
Comply with the National Electrical Code as well as local codes
and ordinances when installing the receptacle.
WARNING!
Electrocution hazard.
Electrical grounding required.
• Do not remove the round grounding
prong from the plug.
• Do not use extension cords or ungrounded
(two-prong) adapters.
• Do not use a power cord that is frayed or
damaged.
• Do not use a power strip.
Failure to follow these instructions may
result in fi re, electrical shock or death.
WARNING!
The refrigerant R600a contained within the appliances is
environmentally friendly, but flammable. Leaking refrigerant
can ignite.
To prevent possible ignition, designed ventilation is required.
Internal Water Dispenser and IceMaker
(if equipped)
Monolith appliances that are equipped with an internal water
dispenser or an IceMaker must be connected to a water supply.
The water supply pressure requirements are diff erent based
on whether or not the supplied Liebherr water fi lter is installed.
With the fi lter installed, the pressure must be in the range
of 40–90 psi (2.8–6.2 bar). Without the fi lter installed the
acceptable pressure range is 22–87 psi (1.5–6 bar).
Use a braided style IceMaker hose with 1/4" compression
end or a 1/4" OD copper line to connect the water supply
with the solenoid valve of the appliance. This is not supplied
with the appliance.
If you have hard water, we recommend you install a water
softener. Also, a fi lter must be installed if the water contains solids
such as sand.
All equipment and devices used to supply the water to the
appliance must comply with the current regulations for your
geographical area.
All models equipped with an internal water dispenser or IceMaker
include a water fi lter located in the front base of the product.
Water fi lters must be replaced periodically. An alarm in the
Infi nitySwipe will indicate when the water fi lter must be replaced.
Safety Instructions and Warnings
• Do not attach the water source while the appliance is
connected to an electrical outlet.
• A shut-off valve must be installed between the hose line and
the main water supply so that the water supply can be
stopped if necessary. Do not install the shut-off valve behind
the appliance.
• The connection to the water supply may only be made by a
trained and licensed plumber.
• The water quality must comply with the drinking water
regulations for the geographical area where the appliance
is located.
• The IceMaker is designed exclusively to make ice cubes in
quantities needed by a household, and may only be operated
with water appropriate for this purpose.
• All repairs and work on the IceMaker may only be done by
Customer Service personnel or other trained personnel.
• The manufacturer cannot accept liability for damage caused
by equipment or water lines between the solenoid valve and
the water supply.
36 37
Page 20
38 39
Monolith columns are designed to fi t any type of
kitchen cabinetry door installation, whether 25" depth
as the typical North America style, or the 24" depth
known as European style.
The depth of the Monolith columns is 24" (610 mm),
which allows for the appliances to be installed in an
European style kitchen cabinetry which requires 24"
(610 mm) and also a 25" (635 mm) deeper cut out to
accommodate diff erent types of installation like standard overlay, full overlay, off set or fl ush inset installation.
The cut out is the niche in which a Monolith column
is installed. The width of the cut out can be the one
of a single column (18", 24", 30", etc.) or the one
for a Side-by-Side combination (42", 48", 54", etc.),
this will depend on the column models considered.
In the North American style cabinetry, the total depth of
the cut out is equal to the depth of the niche plus the face
frame. It does not necessarily include the thickness of the
door panel, as this will depend on the installation style.
For a standard overlay on an American style cabinet and frameless installation in European style cabinet, use the
door panel dimension specifi ed as frameless installation.
For a fl ush inset installation, use the door panel dimensions of inset installation.
For any other type of installation, please refer to Door Clearance Requirements (page 43) to defi ne the door panel
dimensions.
Installation Dimensions
When planning the cut out, it is essential that the
top and side interior walls be fl ush to the appliance
at a minimum depth of 4" (102 mm) from the outer
edge of the face frame and composed of thick
(5/8" (16 mm) minimum) material for secure
installation. Also, because the case interior will be
partially visible when the refrigerator door is opened,
always ensure that the top and side returns are
fi nished to match the exterior furniture at the same
minimum depth of 4" (102 mm).
Monolith columns include a sealing set in order to
cleanly close the gaps between appliance and
cabinet side walls.
Monolith columns are designed to be fully fl ush
integrated when installed in 25" (635 mm) deep
cabinets, by using the stainless steel panels
off ered as accessories, or custom door panels that
perfectly match the rest of kitchen cabinetry.
The typical wood panel thickness is 3/4" (19 mm),
however thicker panels or other materials can be used.
When using custom panels, always ensure that the
panel reverse is fi nished to match the exterior, as
parts of the panel reverse will be visible when the
refrigerator door is opened.
When using custom panels, do not exceed the
maximum panel weight allowed by the door hinge
of the specifi c column.
Standard overlay Frameless Flush inset
Appliance depth
24" (610 mm)
Cut out depth
24" (610 mm)
Cut out depth
24" (610 mm)
Appliance depth
24" (610 mm)
Appliance depth
24" (610 mm)
Cut out depth
25" (635 mm)
1
Not considering overlapping of the panel at the top.
² Not considering overlapping of the panel to the right and left.
Model
H
Inset installation styleWInset installation style
H
Frameless installation
style
W
Frameless installation
style
Max. panel
weight
MRB 2400
79
7
⁄8"
(2029 mm)
23 ¾"
(603 mm)
80"
1
(2032 mm)
24"
2
(610 mm)
52 lbs. (24 kg)
MRB 3000
79
7
⁄8"
(2029 mm)
29 ¾"
(756 mm)
80"
1
(2032 mm)
30"
2
(762 mm)
79 lbs. (36 kg)
MRB 3600
79
7
⁄8"
(2029 mm)
35 ¾"
(908 mm)
80"
1
(2032 mm)
36"
2
(914 mm)
79 lbs. (36 kg)
MF 1851
79
7
⁄8"
(2029 mm)
17 ¾"
(451 mm)
80"
1
(2032 mm)
18"
2
(457 mm)
52 lbs. (24 kg)
MF 2451
79
7
⁄8"
(2029 mm)
23 ¾"
(603 mm)
80"
1
(2032 mm)
24"
2
(610 mm)
52 lbs. (24 kg)
MF 3051
79
7
⁄8"
(2029 mm)
29 ¾"
(756 mm)
80"
1
(2032 mm)
30"
2
(762 mm)
79 lbs. (36 kg)
MF 3651
79
7
⁄8"
(2029 mm)
35 ¾"
(908 mm)
80"
1
(2032 mm)
36"
2
(914 mm)
79 lbs. (36 kg)
Door Panel Dimensions
Page 21
40 41
Side-by-Side Installation
The cut out width for the Side-by-Side combinations is defi ned by adding the single width of each of the models
considered in the combination. Below you can fi nd the cut outs for 42", 48", 54", 60" and 72" niches.
Cut out dimensions for individual Toe Kick
Cut out dimensions for continuous Toe Kick along the wall
Installation Options
Recommended Installations Considerations
Stand-alone
All Monolith appliances can be installed as a left-hinge or righthinge stand-alone unit. When dimensioning the cabinet, include
the thickness of the door panel and handle (see page 43, Door
Clearance Requirements).
Ensure the Monolith appliance is installed so the door has clearance
from any adjacent wall or any kitchen element.
Side-by-Side
within one
cabinet
Monolith appliances can be installed Side-by-Side within one cabinet
by installing a Side-by-Side kit, which must be purchased separately.
When dimensioning the cabinet, include the thickness of the door panel
and handle (see page 43, Door Clearance Requirements).
During design and installation, please take into account the layout of left
and right hinged appliances without the risk of door opening collision.
Ensure that the Monolith appliances are installed in such a way that the
doors do not interfere with any adjacent wall or any kitchen element.
Side-by-Side
within separate
cabinets
Monolith appliances can be installed Side-by-Side within separate
cabinets. If the panel between the cabinet is less than 3/4" (19 mm)
a Side-by-Side heater kit is required. The heater must be ordered
separately.
When dimensioning the cabinet, include the thickness of the door panel
and handle, in order to prevent any door opening collision (see page 43,
Door Clearance Requirements).
A minimum partition of 6" (154 mm) width is required to ensure that
handles to not collide when doors are opened centered towards each
other or facing each other.
Ensure that the Monolith appliances are installed so the doors have
clearance
from any adjacent wall or kitchen element.
A At this point the power cord exits from the appliance rear. 3/4" (19 mm) from the left
and 5" (127 mm) from the fl oor. Free length of the power cord is 98" (2.5 m).
A1 Please refer to the specifi c models to be installed in the combination for a precise
location of A1 point for each model. See pages 17, 19, 21, 27, 29, 31 and 33.
B The appliance has a recess in this area for cable and waterline laying. 1" (25 mm)
in depth and 5 1/2" (140 mm) in height over the whole width of the appliance.
C This surface is visible when the appliance door is open. Designed fi nish is required.
ft
Page 22
42 43
Toe Kick and
Ventilation Requirements
All Monolith ventilation takes place through the Toe
Kick area. Door panels must be a minimum of 4" above
the fl oor. Do not block grill in Toe Kick area.
Liebherr off ers a 4" (102 mm) tall Toe Kick matching
the width of the Monolith columns, and possible
Side-by-Side combinations, as an accessory.
Please refer to page 35 for Toe Kick accessories
ranging from 18" to 72" width.
The Monolith appliance comes with dividers that must
be installed on the appliance and onto the door, in
order to separate the warm exhaust air from the fresh
incoming air.
Door Clearance Requirements
It is fundamental that the Monolith appliances are
installed so the doors (including handles) and adjacent
cabinets, countertops, walls, or other kitchen elements
do not collide with one another when doors open.
In case the door hits the wall or other cabinetry,
a door limiter of 90° is available, please contact
an authorized Liebherr service provider.
Additional solutions include:
• Reduce the door panel thickness if it is larger
than 3/4" (19 mm).
• Rearrange the element that is colliding with the
appliance.
• Use a bumper or stopper to prevent the door from
damaging the adjoining wall or cabinet.
Panel clearance
Frameless installation style
Panel thickness 3/4"
Top view
A = 3/4" gable
B = Front panel door closed. 5/16" (8 mm) overlapping.
Dash line shows an overlapping of 7/8" (22 mm).
This overlapping is solely if the appliance is at the end of a line of cabinets.
C = Front panel 90°
D = Front panel at max. door opening angle of 115°
IMPORTANT
The gap between the appliance front panel and the surrounding furniture panels
must be at least 1/8" (3 mm).
A = Appliance housing
B = Front panel door closed
C = Front panel 90°
D = Front panel at max. door opening angle of 115°
Panel clearance
Panel thickness 3/4"
Top view
Page 23
home.liebherr.com/monolith
Subject to modifi cation. For up-to-date information, visit home.liebherr.com/monolith. Printed in Canada 2019.
Loading...