XC-12
NEW_E3_XC12_ENG_MFL38343841
MODEL : XC12
ENGLISH
2
MICRO Hi-Fi SYSTEM ] USER GUIDE
There is so much your Hi-Fi system can do
Contents
Setting up 3
About Player 4
About Remote control 5
Listening to CDs 6
Connecting your portable USB player - OPTIONAL 6
Listen to cassette tapes 7
Listening to the radio 7
Recording 8
Listening to music from your portable player 8
Setting the Clock 9
Use your player as an alarm clock 9
About MP3/WMA 9
Safety Precaution 10
Troubleshooting 11
Specifications 11
Record from a CD
or radio to cassette
Go to page 8
Play CDs and
cassettes
Go to pages 6 & 7
Lull me to sleep
and wake me up
Go to page 9
Portable CD player MP3 player
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
Play from many
external devices
Go to page 8
MICRO Hi-Fi SYSTEM ] USER GUIDE
3
Setting up
11
Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal
marked L (left) + (plus) and - (minus). Cables from the
right-hand speaker are connected to the terminal marked
R (right) + (plus) and - (minus).
To connect the cable to the player, press each of the four
square plastic finger pads on the rear of the player. The
connector will open ready to receive a cable.
22
Fit the AM loop aerial to its stand
Connect the AM loop aerial to the player.
33
Connect the FM aerial
The reception will be at its best when the two loose
ends of the aerial are in a straight line and horizontal.
44
Plug the power plug into a wall socket
Put the battery in the remote control
Make sure that the + (plus) and - (minus) on the
battery (size AAA) match those on the remote
control.
ENGLISH
4
MICRO Hi-Fi SYSTEM ] USER GUIDE
About Player
VOLUME
Control the volume when using any function.
MODE/RIF
This will change the tuner from stereo to mono
and usually improve the reception.
Z PUSH (CD door)
You can use it when inserting or removing CDs.
Don't open the door while CD plays back.
PHONES (Headphone jack)
Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will
switch off the speakers.
CLOCK
For setting the clock and checking the time.
(see Setting the Clock)
TIMER
With the TIMER function you can turn CD play
and radio reception on or off at a desired time.
(see Use your player as an alarm clock)
Use when playing a cassette tape
eXtreme Dynamic Sound System
Reinforce the treble, bass and surround sound
effect. XDSS ON will show in the display. Press
again for XDSS OFF.
RDS (OPTIONAL) /SET
RDS shows information about radio stations.
(see Listening to the radio)
SET confirms the time you have selected when
setting the clock. (see Setting the clock)
Sound quality adjustment
You can choose between 4 fixed sound
impressions. Select a desired sound mode by
using
EQ.
(FLAT → ROCK → POP → CLASSIC)
USB connector - OPTIONAL
Connect a remote USB compatible player
here.
OPTIMIZER
Optimizes compressible MP3 files so that it
improves the bass sound.
(MP3 - OPT ON → MP3 - OPT OFF)
Loading...