La Crosse Technology WS-9133U-IT Quick Setup Manual

WS-9133U-IT www.lacrossetechnology.com/support Page | 1

Model: WS-9133U-IT

Quick Setup Guide

DC: 082015

WIRELESS FORECAST STATION

Time

12/24hr

+ Alarm

Indoor

Temp.

ºF/ºC

TX37U-IT

Temperature

Sensor

Forecast Icon

+ Tendency

Arrow

Wall
Hanging
Hole

Battery
Compartment
3AA batteries

Pullout
Stand

BUTTONS

2 “AA”

batteries

RESET

Outdoor
Temp.
ºF/ºC

SET + ALARM MIN/MAX

WS-9133U-IT www.lacrossetechnology.com/support Page | 2

Alarm

Icon

Get Started

Step 1: Insert 2 fresh AA, LR6 1.5 volt batteries into the TX37U-IT

sensor according to the polarity marked in the battery
compartment.
Step 2: Insert 3 fresh AA, LR6 1.5 volt Alkaline batteries into the
forecast station according to the polarity markings.
Step 3: After 5 minutes place sensor outside in a shaded location.

Restart: If the outdoor temperature shows dashes, remove
batteries from the station & outdoor sensor. Press any button on
the station 20 times. After 15 minutes, return to Step 1.

Set 12/24 Hour, Temperature Units, Time

1. Hold the SET button to enter time set mode.

2. Press the + button to adjust values.

3. Press the SET button to confirm adjustments and move to next
item.

Settings order:

1. Hour

2. Minutes

3. 12/24 Hour Format

4. °F/°C

Press SET to exit, or wait 30 seconds without pressing buttons to
return to the normal time display.

Set Alarm Time

1. Hold the ALARM button to enter time set mode.

2. Press the + button to adjust values.

3. Press the ALARM button to confirm adjustments and move to
next item.

Settings order:

1. Hour

2. Minutes

Activate/Deactivate Alarm

 Press the ALARM button. The alarm icon will show.
 Press the ALARM button again.
 When the alarm icon is gone, the alarm is inactive.