(Page.1/2)
Firmware Upgrade (Ver.2.1.0)
ib50_v210f_c2.zip
ib51_v210f_c2.zip
KDC’s Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please see below.
Serial Nos. of the Affected Machines:
Please distinguish the new item from the old one by checking the label since no serial number is applied.
Individual box
distinction
Service Bulletin Ref. No. 5JV-0003 (D103)
<Date> June 5, 2013
Affected models:
IB-50: FS-C8025MFP, FS-C8020MFP, TASKalfa 2550ci, FS-C8650DN, FS-C8600DN, FS-6030MFP, FS-6025MFP, FS-
6025MFP/B, FS-C8525MFP, FS-C8520MFP, FS-6530MFP, FS-6525MFP, FS-C2526MFP/C2626MFP, TASKalfa
5550ci/4550ci/3550ci/3050ci/7550ci/6550ci/8000i/6500i/5500i/4500i/3500i
IB-51: FS-4100DN, FS-4200DN, FS-4300DN, FS-2100D, FS-2100DN, FS-C8650DN, FS-C8600DN,
TASKalfa 5550ci/4550ci/3550ci/3050ci//5500i/4500i/3500i
Topic
The firmware was upgraded to support the Step2 functions and the new model.
Firmware version: 2.1.0
Content of Changes
1. Support of the Step2 functions (main changes)・・・・[IB-50]
- Scan to function (Scanner) - COMMAND CENTER support (CCRX link)
- Network authentication - Panel set, etc. (Please refer to the next page.)
2. New model support・・・・[IB-50*/IB-51]
- TASKalfa 5550ci/4550ci/3550ci/3050ci/5500i/4500i/3500i
(The main firmware should be also upgraded. Please refer to the service bulletin SB-2LC-0116-D089. FW
PackV5.00) * Only printer function is supported on TASKalfa 7550ci/6550ci/8000i/6500i.
- Next generation models of the above
*The same label is applied to the B-51 for distinction.
For the KD sales companies, it is possible to download the firmware at the download center on the Service World.
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)
(Page.2/2)
Service Bulletin Ref. No. 5JV-0003 (D103)
<Date> June 5, 2013
Supported Functions
KYOCERA Document Solutions Europe
Customer Services & Support Division (CSSD)