Konica Minolta FIERY Z5 /CF9001, CF9001 Manual

Fiery Z4 Color Server

JOB MANAGEMENT GUIDE

Copyright © 2000 Electronics For Imaging, Inc. All rights reserved.

This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Electronics For Imaging, Inc., except as expressly permitted herein. Information in this document is subject to change without notice and does not represent a commitment on the part of Electronics For Imaging, Inc.

The software described in this publication is furnished under license and may only be used or copied in accordance with the terms of such license.

Patents: 5,867,179; 5,835,788; 5,666,436; 5,553,200; 5,543,940; 5,537,516; 5,517,334; 5,506,946; 5,424,754; 5,343,311; 5,212,546; 4,941,038; 4,837,722; 4,500,919, D406, 117

Trademarks

EFI, the EFI logo, Fiery, the Fiery logo, Fiery Driven, the Fiery Driven logo, EFICOLOR, ColorWise, and Rip-While-Print are trademarks registered in the U.S. Patent and Trademark Office. Fiery ZX, Fiery X2, Command WorkStation, AutoCal, Starr Compression, Memory Multiplier, NetWise, and VisualCal are trademarks of Electronics For Imaging, Inc.

Adobe, the Adobe logo, Adobe Illustrator, PostScript, Adobe Photoshop, Adobe Separator, and Adobe PageMaker are trademarks of Adobe Systems Incorporated, registered in certain jurisdictions. EPS (Encapsulated PostScript) is a trademark of Altsys Corporation. Apple, the Apple logo, AppleShare, AppleTalk, EtherTalk, LaserWriter, and Macintosh are registered trademarks, and MultiFinder is a trademark of Apple Computer, Inc. Microsoft, MS, MS-DOS, and Windows are registered trademarks of Microsoft in the US and other countries. QuarkXPress is a registered trademark of Quark, Inc. Times, Helvetica, and Palatino are trademarks of Linotype AG and/or its subsidiaries. ITC Avant Garde, ITC Bookman, ITC Zapf Chancery, and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation. Ethernet is a registered trademark of Xerox Corporation. NetWare and Novell are registered trademarks and Internetwork Packet Exchange (IPX) is a trademark of Novell, Inc. UNIX is a registered trademark of UNIX System Laboratories, a wholly owned subsidiary of Novell, Inc. PANTONE is a registered trademark of Pantone, Inc. Matchprint is a trademark of Imation Corp.

All other terms and product names may be trademarks or registered trademarks of their respective owners, and are hereby acknowledged.

Legal Notices

APPLE COMPUTER, INC. (“APPLE”) MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE APPLE SOFTWARE. APPLE DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

IN NO EVENT WILL APPLE, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

Apple’s liability to you for actual damages from any cause whatsoever, and regardless of the form of the action (whether in contract, tort [including negligence], product liability or otherwise), will be limited to $50.

Restricted Rights Legends

For defense agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at 252.227.7013.

For civilian agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to restrictions set forth in subparagraph (a) through (d) of the commercial Computer Software Restricted Rights clause at 52.227-19 and the limitations set forth in Electronics For Imaging, Inc.’s standard commercial agreement for this software. Unpublished rights reserved under the copyright laws of the United States.

Printed in the United States of America on recycled paper.

Part Number: 45018523

FCC Information

Declaration of Conformity

Trade Name:	Fiery Server
Model Number:	Fiery Z4 CF9001 (ZXP-01)
Compliance Test Report Number:	M00825A1
Compliance Test Report Date:	August 30, 2000
Responsible Party (in USA):	Electronics for Imaging, Inc.
Address:	303 Velocity Way, Foster City, CA 94404
Telephone:	[phone]

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

Industry Canada Class B Notice

This Class B digital apparatus complies with Canadian ICES-003.

Avis de Conformation Classe B de l’Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Marking (Declaration of Conformity)

We declare under our sole responsibility that the copier and options to which this declaration relates is in conformity with the specifications below. This declaration is valid for the area of the European Union (EU) only.

Product Type	Console Copier System
System Product	CF9100 + Fiery Z4 CF9001 (ZXP-01), CF9100 Options: AFR-12, ST-103, S-105, C-101, AD-7, I/F KIT H, ADF KIT
Name
Compliance	M00828C1
Report Number
Standards	Safety * 2 : EN 60 950/1992 (A1, A2, A3, A4 & A11)
	(Safety of information technology equipment, including electrical business equipment)
	EN 60825-1 / 1994 with A11 (Copier only)
	(Radiation safety of laser products, equipment classification, requirements, and user’s guide)
	EMC *1 : EN55 022 (Class B)/1994 with A1 (1995) & A2 (1997)
	EN55 022 (Class B)/1998 (Printer Controller only)
	(Limits and method for measurement of radio disturbance characteristics of information technology equipment (ITE))
	EN61000-3-2/1995 (Electromagnetic compatibility (EMC)- Part 3: Limits, Section 2: Limits for harmonic current
	emissions (equipment input current ≤16A per phase))
	EN61000-3-3/1995 (Electromagnetic compatibility (EMC)- Part 3: Limits, Section 2: Limitation of voltage fluctuations
	and flicker in low-voltage supply systems for equipment with rated current ≤16A
	EN55024/1998 (Information technology equipment — immunity characteristics — Limits and methods of
	measurement
	EN61000-4-2/1995 : Electrostatic discharge immunity test
	EN61000-4-3/1995 : Radiated electromagnetic field immunity test
	EN61000-4-4/1995 : Electrical fast transient/burst immunity test
	EN61000-4-5/1995 : Surge immunity test
	EN61000-4-6/1996 : Immunity to conducted disturbance, induced by radio-frequency field
	EN61000-4-8/1993 : Power-frequency magnetic field immunity test
	EN61000-4-11: Voltage dips, short interruptions and voltage variations immunity test
	Notes: *1) EMC performance: This product was designed for operation in a typical office environment.
	*2) First year of labeling according to EC-directive 73/23/EEC and 93/68/EEC: 2000
	3) This product was designed for operation in a typical office environment.
EC Directives	Safety: 73/23/EEC and 93/68/EEC
	EMC: 89/336/EEC and 93/68/EEC

This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under EC Directives.

Software License Agreement

Before using the Software, please carefully read the following terms and conditions. BY USING THIS SOFTWARE, YOU SIGNIFY THAT YOU HAVE ACCEPTED THE TERMS OF THIS AGREEMENT. If you cannot or do not accept these terms, you may return the entire package within ten (10) days to the Distributor or Dealer from which you obtained them for a full refund.

Electronics for Imaging, Inc. grants to you a non-exclusive, non-transferable license to use the software and accompanying documentation (“Software”) included with the Fiery Z4 you have purchased, including without limitation the PostScript® software provided by Adobe Systems Incorporated.

You may:

a.use the Software solely for your own customary business purposes and solely with Fiery Z4;

b.use the digitally-encoded machine-readable outline and bitmap programs (“Font Programs”) provided with Fiery Z4 in a special encrypted format (“Coded Font Programs”) to reproduce and display designs, styles, weights, and versions of letters, numerals, characters and symbols (“Typefaces”) solely for your own customary business purposes on the display window of the Fiery Z4 or monitor used with Fiery Z4;

c.use the trademarks used by Electronics for Imaging to identify the Coded Font Programs and Typefaces reproduced therefrom (“Trademarks”); and

d.assign your rights under this Agreement to a transferee of all of your right, title and interest in and to Fiery Z4 provided the transferee agrees to be bound by all of the terms and conditions of this Agreement.

You may not:

a.make use of the Software, directly or indirectly, to print bitmap images with print resolutions of 600 dots per inch or greater, or to generate fonts or typefaces for use other than with Fiery Z4;

b.make or have made, or permit to be made, any copies of the Software, Coded Font Programs, accompanying documentation or portions thereof, except as necessary for use with the Fiery Z4 unit purchased by you; provided, however, that under no circumstances may you make or have made, or permit to be made, any copies of that certain portion of the Software which has been included on the Fiery Z4 hard disk drive. You may not copy the documentation;

c.attempt to alter, disassemble, decrypt or reverse engineer the Software, Coded Font Programs or accompanying documentation.

d.rent or lease the Software.

Proprietary Rights

You acknowledge that the Software, Coded Font Programs, Typefaces, Trademarks and accompanying documentation are proprietary to Electronics For Imaging and its suppliers and that title and other intellectual property rights therein remain with Electronics For Imaging and its suppliers. Except as stated above, this Agreement does not grant you any right to patents, copyrights, trade secrets, trademarks (whether registered or unregistered), or any other rights, franchises or licenses in respect of the Software, Coded Font Programs, Typefaces, Trademarks or accompanying documentation. You may not adapt or use any trademark or trade name which is likely to be similar to or confusing with that of Electronics For Imaging or any of its suppliers or take any other action which impairs or reduces the trademark rights of Electronics For Imaging or its suppliers. The trademarks may only be used to identify printed output produced by the Coded Font Programs. At the reasonable request of Electronics For Imaging, you must supply samples of any Typeface identified with a trademark.

Confidentiality

You agree to hold the Software and Coded Font Programs in confidence, disclosing the Software and Coded Font Programs only to authorized users having a need to use the Software and Coded Font Programs as permitted by this Agreement and to take all reasonable precautions to prevent disclosure to other parties.

Remedies

Unauthorized use, copying or disclosure of the Software, Coded Font Programs, Typefaces, Trademarks or accompanying documentation will result in automatic termination of this license and will make available to Electronics For Imaging other legal remedies.

Limited Warranty And Disclaimer

Electronics For Imaging warrants that, for a period of ninety (90) days from the date of delivery to you, the Software under normal use will perform without significant errors that make it unusable. Electronics For Imaging’s entire liability and your exclusive remedy under this warranty (which is subject to you returning Fiery Z4 to Electronics For Imaging or an authorized dealer) will be, at Electronics For Imaging’s option, to use reasonable commercial efforts to attempt to correct or work around errors, to replace the Software with functionally equivalent software, or to refund the purchase price and terminate this Agreement. Some states do not allow limitations on duration of implied warranty, so the above limitation may not apply to you.

Except for the above express limited warranty, Electronics For Imaging makes and you receive no warranties or conditions on the Products, express, implied, or statutory, and Electronics For Imaging specifically disclaims any implied warranty or condition of merchantability or fitness for a particular purpose.

For warranty service, please contact your authorized service/support center.

EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY, ELECTRONICS FOR IMAGING MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS ON THE SOFTWARE OR CODED FONT PROGRAMS, EXPRESS, IMPLIED, STATUTORY, OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH YOU, AND ELECTRONICS FOR IMAGING SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Electronics For Imaging does not warrant that the operation of the software will be uninterrupted or error free or that the Software will meet your specific requirements.

Limitation Of Liability

IN NO EVENT WILL ELECTRONICS FOR IMAGING OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM THE USE OF THE SOFTWARE, CODED FONT PROGRAMS OR ACCOMPANYING DOCUMENTATION, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF ELECTRONICS FOR IMAGING OR ANY AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. YOU ACKNOWLEDGE THAT THE PRICE OF THE UNIT REFLECTS THIS ALLOCATION OF RISK. BECAUSE SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

Export Controls

You agree that you will not export or re-export the Software or Coded Font Programs in any form without the appropriate United States and foreign government licenses. Your failure to comply with this provision is a material breach of this Agreement.

Government Use

Use, duplication or disclosure of the Software by the United States Government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or in subparagraphs (c) (1) and (2) of the Commercial Computer Software—Restricted Right Clause at 48 CFR 52.227-19, as applicable.

Third Party Beneficiary

You are hereby notified that Adobe Systems Incorporated, a California corporation located at 345 Park Avenue, San Jose, CA 95110-2704 (“Adobe”) is a thirdparty beneficiary to this Agreement to the extent that this Agreement contains provisions which relate to your use of the Fonts, the Coded Font Programs, the Typefaces and the Trademarks licensed hereby. Such provisions are made expressly for the benefit of Adobe and are enforceable by Adobe in addition to Electronics For Imaging.

General

This Agreement will be governed by the laws of the State of California.

This Agreement is the entire agreement held between us and supersedes any other communications or advertising with respect to the Software, Coded Font Programs and accompanying documentation.

If any provision of this Agreement is held invalid, the remainder of this Agreement shall continue in full force and effect.

If you have any questions concerning this Agreement, please write to Electronics For Imaging, Inc., Attn: Licensing Dept. or see Electronics For Imaging’s web site at www.efi.com.

Electronics For Imaging, Inc.

303 Velocity Way

Foster City, CA 94404

Contents

Preface

About this manual	xv
Terminology	xvii
About the documentation	xviii
Fiery Z4 job environments	xix
Permissions	xix
Safety warnings	xx
Cleaning the Fiery Z4	xx

Chapter 1: Using the Control Panel

Introduction to the Fiery Z4 Control Panel	1-1
Activity light	1-1
Buttons	1-2
Display window	1-2
Functions menu	1-4
Starting and shutting down the Fiery Z4	1-5
Starting the Fiery Z4	1-5
Restarting the Fiery Z4	1-7
Shutting down the Fiery Z4	1-7

Chapter 2: Using the FieryBar

Introduction to the FieryBar	2-1
Status	2-1
Activity light	2-2
Commands	2-2
Starting and shutting down the Fiery Z4	2-4
Restarting the Fiery Z4	2-4
Shutting down the Fiery Z4	2-5

x Contents

Chapter 3: Introduction to the Command WorkStation

About the Command WorkStation	3-1
Starting up and logging in	3-3
Connecting to the server	3-4
Logging in	3-5
Logging out	3-6
The Command WorkStation interface	3-7
Window area (Queues, Archive, FreeForm, Job Log)	3-8
Menu bar	3-9
Server selection tabs	3-12
Sliders	3-13
Job ticket information	3-14
Window selection tabs	3-15
Queues window	3-15
Status bars	3-16
Job icons	3-19
Spool area	3-19
RIP area	3-21
Print area	3-22
Job commands	3-23
Archive window	3-26
FreeForm window	3-28
About FreeForm printing	3-29
Using the FreeForm window	3-29
Job commands for FreeForm master jobs	3-31
Filtering jobs in the FreeForm window	3-32
Assigning and monitoring FreeForm Masters	3-32
Job Log window	3-35
Filtering jobs	3-37
Job properties	3-40
Viewing and editing job properties	3-41

xi Contents

Chapter 4: Managing Print Jobs

Communicating with users	4-1
What the user needs to know	4-1
How users communicate print requirements	4-3
Customizing the Command WorkStation window	4-4
Setting Command WorkStation Preferences	4-5
Printing server information pages	4-6
Workflow scenarios	4-8
Using the copier	4-10
Using the copier as a scanner	4-10
Canceling jobs	4-11
Viewing and overriding print settings	4-11
Printing variable data documents (FreeForm)	4-14
Downloading files and fonts	4-15
Managing server fonts	4-18
Managing jobs with multiple color servers	4-19
Archiving jobs	4-21
Importing archived jobs from external media	4-23
Using the Job Log	4-24
Duplex Alignment	4-25
Other server management commands	4-26

Chapter 5: DocBuilder Pro

Job Management with DocBuilder	5-1
Menu bar	5-2
Active jobs and held jobs	5-3
Job commands	5-4
Viewing and editing jobs	5-6
Previewing jobs	5-6
Full-screen previews	5-9
Editing and merging jobs	5-11
Editing or merging files	5-13

xii Contents

Duplex Alignment command	5-20
Duplex Alignment	5-20

Chapter 6: Using Imposition

Main window	6-1
Job previews	6-3
Navigating in the main window	6-4
Switching between page view and layout view	6-5
Setting magnification levels	6-6
Viewing the sheets	6-7
Using templates	6-9
Template pop-up menu	6-9
Saving your work	6-10

Chapter 7: Advanced Features of DocBuilder Pro

Imposition settings	7-1
Sheet area	7-2
Layout area	7-4
Scaling area	7-6
Finishing area	7-8
Modifying the layout manually	7-11
Reordering pages in Layout mode	7-12
Rotating pages	7-13
Setting gutter sizes	7-14
Managing templates	7-15
Tips for using the Imposition feature of DocBuilder Pro	7-16
DocBuilder Pro and Acrobat technology	7-16
File management	7-17
Saving imposed jobs	7-18

xiii Contents

Chapter 8: Overview of Fiery WebTools

Fiery WebTools	8-1
Access privileges	8-1
Using Fiery WebTools	8-2

Chapter 9: Fiery WebSpooler and Fiery Spooler

Tracking and managing jobs with Fiery WebSpooler	9-1
About the Fiery WebSpooler window	9-3
Manipulating job options and job flow	9-4
Overriding job option settings	9-6
Thumbnails and full-screen previews (DocBuilder)	9-7
Using the Job Log	9-8
Fiery Spooler for Mac OS computers	9-11
Differences between Fiery Spooler for Mac OS and Fiery WebSpooler	9-12

Appendix A: Basics of Imposition

Printing books with the Imposition feature of DocBuilder Pro	A-1
Basics of imposition layout	A-1
Printer’s marks	A-4
Additional sheets	A-6
Binding methods	A-7
Step-and-repeat and gang-up printing	A-9

Appendix B: Templates

1-Up Full Bleed	B-1
2-Up Perfect	B-2
2-Up Saddle	B-4
3-Up Trifold Brochure	B-6
4-Up Gate Fold	B-8
4-Up Head to Head	B-10

4-Up Z-fold

B-12

xiv Contents

Appendix C: Troubleshooting

Error messages	C-1
Maintaining optimal system performance	C-4
Troubleshooting	C-5
Command WorkStation hangs	C-5
Command WorkStation fails to connect to a Fiery Z4	C-6
Unexpected printing results	C-7
Clearing the server	C-8
Users are unable to connect to the copier	C-8
Setup error messages	C-9
AutoCal error messages	C-9

Index

Preface

xv About this manual

This manual is intended for Fiery Z4 Color Server™ operators or administrators, or users with the necessary access privileges, who monitor and manage job flow, perform color calibration, and troubleshoot problems that may arise. It describes the functions and features of Fiery® utilities and Fiery WebTools™ for the purposes of print job management and color quality control.

The Fiery Z4 includes Command WorkStation™ software, which enables an operator to manage all jobs sent to the Fiery Z4. Although it may not be the case at all sites, the documentation for this product assumes the presence of an operator who controls and manages jobs sent by users from remote workstations.

Client utilities can be installed onto the Fiery Z4 from the User Software CD if the Fiery Advanced Controller Interface option is installed. Do not install any other applications onto the Fiery Z4. Other applications are not supported and can cause system problems.

About this manual

This manual is organized as follows:

•Chapter 1 describes the Fiery Z4 Control Panel. It explains the various messages and icons that you might see on the Control Panel and describes how to print system information pages from the Control Panel. It also explains how to start up and shut down the Fiery Z4.

•Chapter 2 describes the FieryBar™. It explains the various messages and icons that you might see and also explains how to start up and shut down the Fiery Z4 if you have the Fiery Advanced Controller Interface installed.

xviPreface

•Chapters 3 and 4 describe the Command WorkStation interface. The Command WorkStation application can be installed on networked Windows 95/98, Windows NT 4.0, and Windows 2000 computers and is used to view and manage virtually all aspects of Fiery Z4 activity. In addition to providing a graphic display of the job flow, the Command WorkStation allows you to reprint or hold jobs, view and override print option settings, download files, manage printer fonts, preview print jobs, merge rasterized jobs, calibrate the Fiery Z4, and perform Setup (server configuration). These chapters also provide information on archiving jobs, moving jobs between Fiery Z4 color servers, and printing variable data documents.

•Chapter 5 describes how to use DocBuilder Pro™, only available if you have the DocBuilder Pro option for the Command WorkStation installed.

•Chapter 6 describes how to use the Imposition feature of DocBuilder Pro to arrange the pages of your print job in special layouts for folding, binding, or cutting after printing. The Imposition feature is only available if you have the DocBuilder Pro option for the Command WorkStation installed.

•Chapter 7 provides instructions on using the advanced aspects of the Imposition feature of DocBuilder Pro to create custom layouts and get the most from the Imposition feature.

•Chapter 8 introduces Fiery WebTools, explains how to access them, and directs you to sources of more information (in this manual or in other manuals in the documentation set).

•Chapter 9 describes Fiery WebSpooler and Fiery Spooler™, which can be used to view and manage Fiery Z4 job activity. The interface and features of Fiery

WebSpooler have identical counterparts in the Command WorkStation; therefore, this chapter refers you to Chapters 3 and 4 for details about many Fiery WebSpooler functions.

•Appendix A provides an overview of the terms and concepts of imposition, including various folding, binding, and cutting methods.

•Appendix B includes descriptions of the built-in templates available from the Imposition feature of DocBuilder Pro.

•Appendix C lists error messages that you might see on the Fiery Z4 Control Panel, the FieryBar, the Command WorkStation, Fiery WebSpooler, Fiery Spooler, or the copier, and contains some troubleshooting information.

xvii About this manual

Terminology

Specific terms are explained as they are introduced. However, the following general terms are used throughout:

•PostScript (PS)—A computer language designed as a page description language. The Fiery Z4 uses this language for imaging the page and for communication with applications and with the print engine.

The term “PostScript” can also be used to refer to PDF data jobs. PDF is a structured form of PostScript that provides the ability to preview, scale, and reorder pages. Where applicable, the term “PDF” is specifically used to refer to PDF data or jobs.

•Job—A file consisting of PostScript commands and comments that describe the graphics, sampled images, and text that should appear on each page of a document, and the printer options that should be used in printing, such as media or color rendering style.

•Spool—Write to a disk. Usually used in this manual to refer to a PostScript print job being saved to the Fiery Z4 hard disk in preparation for processing and printing.

•RIP—Acronym for raster image processing, which changes text and graphics commands into descriptions of each mark on a page. In common use as a noun, a “raster image processor” (RIP) is the computer processor that performs this function.

•Print—The process of rendering, or imaging, a page or a job on a printer.

These concepts can explain how the Fiery Z4 and the copier work together as a powerful printing system. The Fiery Z4 RIP changes text and graphics commands in PostScript into color specifications for each dot of toner deposited on a page by the copier.

xviii Preface

About the documentation

This manual is part of the set of Fiery Z4 documentation, which includes the following manuals for users and system administrators:

•The Configuration Guide explains basic configuration and administration of the Fiery Z4 for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0, and Novell NetWare servers to provide PostScript printing services to clients.

•Getting Started describes how to install software to enable users to print to the Fiery Z4. Specifically, it describes installation of PostScript printer drivers, printer description files, and other user software provided on the User Software CD. It also explains how to connect each user to the network.

•The Printing Guide describes the printing features of the Fiery Z4 for users who send jobs via remote workstations on the network.

•The Color Guide provides information on managing the color output of your Fiery Z4 Color Server. It addresses concepts and issues associated with printing to the Fiery Z4 and outlines key workflow scenarios. This manual explains how to calibrate your copier and take advantage of the ColorWise® color management system as well as features in ColorWise Pro Tools™. In addition, the Color Guide offers information on printing from popular Windows and Mac OS applications.

•The Job Management Guide explains the functions of the Fiery Z4 client utilities, including the Command WorkStation, and how they can be used to manage jobs. This manual is intended for an operator or administrator, or a user with the necessary access privileges who needs to monitor and manage job flow, perform color calibration, and troubleshoot problems that may arise.

•Release Notes provide last-minute product information and workarounds for some of the problems you may encounter.

xix Fiery Z4 job environments

Fiery Z4 job environments

The Fiery Z4 supports several levels of control of printing, job management, and setup, and offers you the flexibility to choose the configuration that corresponds to the requirements of your site. Your situation may correspond to one of the descriptions outlined below, or you may prefer an intermediate level of control.

At one extreme, an administrator or operator in a high-volume printing environment controls the entire job flow and all printing. Print jobs arriving from remote users are spooled to the server disk and stored until the operator decides it is time to print them. Additional functions (calibration, job overrides, prioritizing, font management) are reserved for the administrator or operator.

At the other extreme, anyone on the local network can control all printing and server functions; operator intervention is not necessary. Users can print from their workstations to any of the published print connections. Anyone can use the Command WorkStation, Fiery WebSpooler, or Fiery Spooler to control any print job.

The spectrum of control that an administrator can implement is described fully in the

Configuration Guide.

Permissions

Support for these job environments is achieved by a combination of Fiery Z4 Setup options. By default, anyone can access Setup, but the administrator can limit access to Setup by specifying an Administrator password for the Fiery Z4 (see the Configuration Guide).

Also by default, anyone can log in to the Command WorkStation, Fiery WebSpooler, or Fiery Spooler and control job flow, but an administrator can restrict access to these functions by specifying an Operator password.

xx Preface

The three security levels, from greatest to least control, are:

•Administrator—confers control of Setup and is the highest level of control. The person who has access to Setup can control the printing and job management environment by choosing which queues are enabled, and by electing to set passwords. The Administrator can also manage the fonts on the server, clear the server disk when necessary, perform calibration, and set a common web link for all users who log in to the Fiery Z4 using their web browser.

•Operator—includes control of print jobs that arrive at the server and the ability to reboot the server.

•Guest—allows users to view the status of active jobs and the list of stored jobs. They cannot make changes to jobs or change their printing instructions. A password is not needed to log in as Guest and view jobs from the Command WorkStation, Fiery WebSpooler, or Fiery Spooler windows.

This manual describes the features of the Fiery client utilities, including the Command WorkStation, and all operator privileges, whether those privileges are available to everyone or are exclusive to only certain people. It also includes descriptions of administrator functions, sometimes referring you to other manuals for more information.

Safety warnings

The Fiery Z4 display window is a liquid crystal display (LCD) that is made of glass and can break. Do not subject it to strong shocks.

If the display window breaks and the liquid crystal material leaks out, do not inhale, ingest, or touch it. If the material gets on your skin or clothing, wash it off with soap and water immediately.

Do not touch or put pressure on the panel. This will change the color of the panel.

Cleaning the Fiery Z4

Clean the Fiery Z4 with a soft cloth moistened with isopropyl alcohol or ethyl alcohol. Never use water or ketone, as these may permanently alter the display.

11-1

Chapter 1:

Using the

Control Panel

Introduction to the Fiery Z4 Control Panel

You can use the Fiery Z4 Control Panel to view status information, print special pages, and set up printing. While most elements in the Control Panel display have counterparts in the Command WorkStation, you can view current functions on the Control Panel even when the Command WorkStation is not connected to the server or is not running.

Introduction to the Fiery Z4 Control Panel

The Control Panel shown below is located on the front of the Fiery Z4.

Activity light

Display window

Up button

Down button

Line selection buttons

Menu button

Activity light

The activity light indicates the current Fiery Z4 activity. If the light is:

Solid red	An error has occurred, causing the Fiery Z4 to be disabled.
Flashing red	There is an error causing printing to be disabled, but the
	Fiery Z4 is capable of processing.
Solid green	The Fiery Z4 is idle.
Flashing green	The Fiery Z4 is RIPping or printing a job, or
	communicating with a remote computer.
No light	The Fiery Z4 is off or starting up.

11-2 Using the Control Panel

Buttons

Line selection	There are four line selection buttons on the right side of the
buttons	Control Panel. Use these buttons to select the command
	displayed on the corresponding line of the display window.
	When a button is active, a special character (>) appears in the
	display window next to the button.
Up and down	Use these buttons to scroll to different screens in multi-
buttons	screen lists, to select Setup options from a list of available
	options, and to scroll alphanumeric characters.
Menu button	Press this button to view other screens. Under normal
	operation, the Control Panel displays the Info, RIP, or Print
	Status screen with information about the status of the
	Fiery Z4. If you press the Menu button, the Functions menu
	is displayed and you can perform additional operations (see
	page 1-4). If a job is processing or printing, press the Menu
	button to cycle among the active screens.

	Display window
	The display window provides information about the status of the Fiery Z4, displays
	menu information, and enables you to view and edit information in the Setup menus.
	The status area at the bottom of the display window displays text that tells you what
	screen you are looking at and highlights one of the icons to indicate what the Fiery Z4
	is doing. Only the icons for the screens that are currently available appear. The menu
	button cycles among the active screens.
Alert Status	If there is a problem with processing a job or printing functions, an error message
	appears on the Control Panel. For information on error messages, see
	Appendix C.

11-3 Introduction to the Fiery Z4 Control Panel

Print Status	When the Fiery Z4 is printing a job, the Print Status screen appears. This screen
	displays the following:
	Cancel Job—Press the top line selection button to cancel the job currently
	printing.
	User name—The name of the user who sent the job currently processing.
	Pages/Total—The number of copies of the current job printed and the total
	number of copies of the job requested.
RIP Status	When the Fiery Z4 is processing a job, the RIP Status screen appears. This screen
	displays the following:
	Cancel Job—Press the top line selection button to cancel the job currently
	processing. The Fiery Z4 cancels the job before printing begins.
	Document name—The name of the document currently processing.
	User name—The name of the user who sent the job currently processing.
	Kilobytes—The size (in kilobytes) of the job processed so far.
	NOTE: This number is always displayed in kilobytes; for example, 10MB is
	displayed as 10000KB.
Info Status	When the Fiery Z4 is not processing or printing a job, it displays information
	about the current server and software. It displays the following information:
	Server Name—The Fiery Z4 name, as it is configured in Setup.
	Status—The current status of the Fiery Z4. The Fiery Z4 status can be: Idle,
	Initializing, Busy, Processing, or Printing.
	Megabytes—The space (in megabytes) available on the Fiery Z4 hard disk, for
	example, 756MB.
	Version—The system software version running on the Fiery Z4.
Functions	You can press the Menu button to display the Functions menu. Use the up and
	down buttons to scroll through the list. Press the line selection button to the right
	of a command to select that command. See page 1-4 for more information.
Network	The network icon appears at the bottom left of any of the other screens when a
	job is being sent to the Fiery Z4, either over the network. The network icon also
	appears, together with a flashing green activity light, when a remote utility is
	running.

11-4		Using the Control Panel
	Functions menu
	The Functions menu provides many of the options available from the Command
	WorkStation. You can choose the following commands from this menu:
Print Pages	Print special pages from the Fiery Z4. You can print the following pages from the
	submenu that appears:
	Test Page—A Test Page enables you to confirm that the Fiery Z4 is properly
	connected to the copier, and provides color and grayscale samples to troubleshoot
	problems with the copier or the Fiery Z4. The following settings are among those
	listed on the Test Page: server name, printer model, color settings, calibration
	information, date and time the Test Page was printed.
	Configuration—Prints the Configuration page, which gives the current server and
	device configuration. This page lists general information about the hardware and
	software configuration of the Fiery Z4, the current options for all Setup settings,
	information about the current calibration, and the Ethernet and Token Ring
	addresses of the Fiery Z4.
	Job Log—Prints a log of the last 55 jobs. For information on the fields in the Job
	Log and on printing it in other forms, see “Job Log window” on page 3-35.
	Control Panel Map—Prints the Control Panel Map, which is an overview of the
	screens you can access from the Control Panel. For information about using these
	screens to set up the Fiery Z4, see the Configuration Guide.
	Color Charts—Prints samples of the RGB, CMY, and PANTONE colors available
	from the Fiery Z4.
	Font List—Prints a list of all fonts currently on the Fiery Z4 hard disk.
Suspend Printing	Suspend communication between the Fiery Z4 and the copier. You must suspend
	printing if you want to interrupt the current Fiery Z4 job so that you can use the
	copier to make copies. Jobs continue to process on the Fiery Z4. After you make
	the copies, select Resume Printing to continue printing jobs from the Fiery Z4.
Resume Printing	Resume communication between the copier and the Fiery Z4 after you have
	finished making copies.

Shut Down	11-5		Starting and shutting down the Fiery Z4
		Shut down all Fiery Z4 activity in the correct manner and then restart. You should
		use this option instead of the power switch on the back of the Fiery Z4. The
		following options are available from the submenu that appears:
		Restart Server—Restarts the server without shutting down the Fiery Z4 hard disk
		Shut Down System—Shuts down the Fiery Z4 hard disk
		Reboot System—Restarts the system after shutting down the Fiery Z4 hard disk
Clear Server		Clear all jobs in all server queues as well as all jobs archived on the Fiery Z4 hard
		disk, the index of archived jobs (in the Archive window), all FreeForm masters, the
		index of FreeForm masters (in the FreeForm window), and the Job Log. Check with
		your administrator or operator before choosing Clear Server. If an Administrator
		password has been set, you must enter it to access Clear Server.
Run Setup		Enter the Setup menu and change Setup option settings. See the Configuration
		Guide for more details.
Run Diagnostics		This function is provided for service representatives only. Contact your authorized
		service/support technician for information about running diagnostics.
Calibration		Calibrate the Fiery Z4 using AutoCal. For more information, see the Color Guide. If
		an Administrator password has been set, you must enter it to access Calibration.
		Starting and shutting down the Fiery Z4
		Generally, you can leave the Fiery Z4 running all the time. This section describes how
		to shut down and restart the Fiery Z4 when necessary.
		Starting the Fiery Z4
		To start the Fiery Z4, move the power switch on the back of the Fiery Z4 to the On
		position. If the copier is also powered off, power it on before powering on the
		Fiery Z4.

Power switch

11-6 Using the Control Panel

Diagnostic messages appear on the Fiery Z4 Control Panel. If any diagnostics fail, more information and instructions appear. Contact your service representative if the Fiery Z4 encounters problems while running the diagnostics.

If you want to change Setup option settings, press any button; if you do not press a button, the Fiery Z4 continues starting up and displays the message Idle when it is ready to receive data.

NOTE: If an Administrator password has been set, you are required to enter it to access Setup.

If you press a button, the following options appear. For information about the Setup menus and options, see the Configuration Guide.

Choose:	To do this:
Exit Setup	Exit the Setup menus; the Fiery Z4 reboots.
Server Setup	Enter the Server Setup menus.
Network Setup	Enter the Network Setup menus.
Printer Setup	Enter the Printer Setup menus.
PS Setup	Enter the PostScript Setup menu.
Color Setup	Enter the Color Setup menu.
Job Log Setup	Enter the Job Log Setup menu.
Change Password	Change the Administrator password.

11-7 Starting and shutting down the Fiery Z4

Restarting the Fiery Z4

You should use the procedure described below to restart the Fiery Z4 rather than using the power switch on the back of the Fiery Z4.

TO RESTART THE FIERY Z4:

1.Make sure the Fiery Z4 is not receiving, processing, or printing a job.

Make sure the status message on the Control Panel reads Idle.

NOTE: If a job from the Print queue is processing, it will continue processing and print after the Fiery Z4 is restarted; if a job sent to the Direct connection is processing, it will not finish processing or printing.

2.Press the Menu button to display the Functions menu.

3.Use the down button to scroll to the last screen and choose Shut Down.

4.Use the line selection button to choose Restart Server.

Shutting down the Fiery Z4

You may need to shut down the Fiery Z4 for service. When you do so, fonts that have been downloaded to the hard disk drive are not deleted. Print jobs in the Hold and Printed queues and jobs that have been processed but not printed are not deleted and are available for printing when you restart the Fiery Z4.

11-8 Using the Control Panel

TO SHUT DOWN THE FIERY Z4:

1.Make sure the Fiery Z4 is not receiving, processing, or printing a job.

Make sure the status message on the Control Panel reads Idle. If a job has just finished processing or printing, wait at least five seconds after the Control Panel status message changes to Idle before proceeding.

NOTE: If a job from the Print queue is processing, it will continue processing and print after the Fiery Z4 is restarted; if a job to the Direct connection is processing, it will not finish processing or printing.

2.Press the Menu button to display the Functions menu.

3.Use the down button to scroll to the last screen and choose Shut Down.

4.Use the line selection button to choose Shut Down System.

Proceed to the next step when the screen displays the message, “It is now safe to power off the server.”

5.Power off the Fiery Z4 by moving the power switch on the back to the Off position.

NOTE: After powering off the Fiery Z4, make sure to also power off the copier. Leaving the copier powered on while the Fiery Z4 is powered off can lead to excessive drain on the Fiery Z4 motherboard battery.

22-1

Chapter 2:

Using the

FieryBar

Introduction to the FieryBar

If you have the Fiery Advanced Controller Interface Kit installed, you can use the FieryBar to view Fiery Z4 status information, launch software, set up and restart the Fiery Z4, delete stored jobs, cancel active jobs, and log off Windows. While most elements in the FieryBar have counterparts in the Command WorkStation, you can view current functions on the FieryBar even when the Command WorkStation is not running.

Introduction to the FieryBar

The FieryBar, located at the top of the monitor screen, comprises the following parts:

RIPping area

Printing area

Activity light

Click to expand or collapse FieryBar

RIP status area

Message area

Status

The FieryBar displays information about the status of the Fiery Z4:

RIPping area	Displays the name of the job currently processing
RIP status area	Displays the amount of the job that has processed

Printing area

Displays the name of the job currently printing

Message area

Displays error messages and other Fiery Z4 information

22-2 Using the FieryBar

Activity light

The activity light in the right corner of the FieryBar indicates current Fiery Z4 activity. If the light is:

Solid red	An error has occurred, causing the Fiery Z4 to be disabled.
	Check the message area for details of the error.
Flashing red	There is an error causing printing to be disabled, but the
	Fiery Z4 is capable of processing. Check the message area for
	details of the error.
Solid green	The Fiery Z4 is idle.
Flashing green	The Fiery Z4 is RIPping or printing a job, or
	communicating with a remote computer. Check the RIPping
	area, the RIP status area, and the printing area for details.
No light	The Fiery Z4 is starting up.

Commands

Right-clicking the FieryBar or the Fiery icon on the right side of the Windows taskbar enables you to access many Fiery Z4 features. You can choose the following commands from the menu that appears:

Command WorkStation	Launches the Command WorkStation. For more
	information on connecting to and using the features of
	the Command WorkStation, see Chapters 3 and 4.
ColorWise Pro Tools	Launches ColorWise Pro Tools. For more information
	on connecting to and using the features of ColorWise
	Pro Tools, see the Color Guide.
Set Up Fiery	Opens the Fiery Z4 Setup dialog box. For more
	information about the Setup options, see the
	Configuration Guide.
Restart Fiery	Shuts down all Fiery Z4 activity in the correct manner
	before restarting. You should use this option instead of
	the power switch on the back of the Fiery Z4 (see
	“Starting and shutting down the Fiery Z4” on
	page 2-4).