KitchenAid KSB1570AQ, KSB1570ER, KSB1570OB, KSB1570QG, KSB1570SL Owner's Manual

...

0 (0)

KSB1570

INSTRUCTIONS INSTRUCTIONS INSTRUCCIONES

Welcome to the world of KitchenAid®.

We’re committed to helping you create a lifetime of delicious meals for family and friends. To help ensure the longevity and performance of your appliance, keep this guide handy. It will empower you with the best way to use and care for your product. Your satisfaction is our #1 goal. Remember to register your product online at www.kitchenaid.com or by

mail using the attached Product Registration Card.

Join us in the kitchen at www.kitchenaid.com.

Scan with your mobile device for recipes, tips, and more.

2	USA: 1.800.832.7173	KitchenAid.com
2	Canada: 1.800.807.6777	KitchenAid.ca
	Canada: 1.800.807.6777	KitchenAid.ca

BLENDER INSTRUCTIONS
Table of Contents
blender SAFETY
Important safeguards..........................................................................................	4
Electrical requirements.......................................................................................	5
PARTS AND FEATURES
Parts and accessories..........................................................................................	6
Assembling the blender
Preparing the Blender for use.............................................................................	6
operating the blender
Using the Blender................................................................................................	8
Crushing ice........................................................................................................	9
Using Pulse mode..............................................................................................	10
Using the Blender pitcher ingredient cup, and Soft Start blending feature.......	11
Speed control guide..........................................................................................	11
Tips for great results
Quick tips..........................................................................................................	12
How to..............................................................................................................	12
CARE AND CLEANING
Cleaning the Blender.........................................................................................	13
Troubleshooting
Blender does not operate when a setting is selected.......................................	14
Blender stops while blending............................................................................	14
WARRANTY...........................................................................................................	15

<![if ! IE]>

<![endif]>English

Proof of Purchase & Product Registration

Always keep a copy of the itemized sales receipt showing the date of purchase of your Blender. Proof of purchase will assure you of in-warranty service. Before you use your

Blender, please fill out and mail your product registration card packed with the unit, or register on-line at www.kitchenaid.com. This card will enable us to contact you in the unlikely event of a product safety notification and assist us in complying with the provisions of the

Consumer Product Safety Act. This card does not verify your warranty. Please complete the following for your personal records:

Model Number_________________________________________________________________________

Ser_ial Number_ ________________________________________________________________________

Date Pur_chased_______________________________________________________________________

Stor_e Name_ _________________________________________________________________________

BLender Safety

IMPORTANT SAFEGUARDS

When using electr_ical appliances, basic safety pr_ecautions should always be followed, including the following:

1.Read all instructions.

2.To protect against risk of electrical shock, do not put Blender in water or other liquid.

3.Close supervision is necessary when any appliance is used by or near children.

4.Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

5.Avoid contact with moving parts.

6.Do not operate the Blender with a damaged cord or plug or after appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest Authorized Service Center for examination, repair or electrical or mechanical adjustment.

7.Do not use outdoors.

8.Do not let cord hang over edge of table or counter.

9.Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the Blender. A scraper may be used but must be used only when the Blender is not running.

10.Blades are sharp. Handle carefully.

11.Always operate Blender with cover in place.

Blender Safety

12.The use of attachments, including canning jars, not recommended by KitchenAid may cause a risk of injury to persons.

13.When blending hot liquids, remove center piece of two-piece cover.

14.Flashing light indicates ready to operate - avoid any contact with blades or moveable parts.

15.This product is designed for household use only.

SAVE THESE INSTRUCTIONS

Electr_ical r_equir_ements

Voltage: 120 Volts A.C. only Frequency: 60 Hz

NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. Do not use an adapter.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.

<![if ! IE]>

<![endif]>English

Parts and Features

Par_ts and accessor_ies

Lid with ingr_edient cup

BPA Fr_ee

pitcher_

Stainless steel blade

Speed selection buttons

Clean touch contr_ol pad

Die-cast

metal base

Assembling the blender

Pr_epar_ing the Blender_ for_ use

Befor_e Fir_st Use

Before using your Blender for the first time, wipe Blender base with a warm damp cloth, then wipe clean with a damp cloth. Dry with a soft cloth. Wash pitcher, lid, and ingredient cup in warm, sudsy water (see “Care and Cleaning” section). Rinse parts and wipe dry.

Tab

Slot

1	Align the pitcher tabs with the slots on
	the base. The pitcher handle may be on

the right or left side of the blender base.

Assembling the blender

<![if ! IE]>

<![endif]>English

2	Rotate pitcher clockwise, approximately	3	Adjust the length of the Blender power
	1/8 turn until pitcher clicks into place.		cord.

4 Put lid on pitcher.

NOTE: When properly positioned, pitcher will rest completely on Blender base. If not, repeat steps 1 and 2.

Important: When moving your blender, always support/lift from the blender base. Base may become disengaged from jar if carried by jar handle only.

5	Before using the Blender, plug into a
	grounded 3-prong outlet, and press

POWER. The Power indicator light will flash when ready.

6	Before removing the pitcher from the
	base, always press POWER to stop the

flashing lights and unplug the power cord.

OPERATING the blender

Using the Blender_

Befor_e Use

While the Blender Power indicator light is blinking:

-Do not interfere with blade movement.

-Do not remove pitcher lid.

Before operating the Blender, make sure the pitcher is properly locked onto the Blender base.

The Blender has five speeds: 1 (being the

lowest) and 5 (being the highest). It also

features Ice and Pulse.

1	Put ingredients in pitcher and firmly
	place lid.

3	When finished, press POWER to turn
	off. Unplug Blender before removing

the pitcher.

2	Press POWER. The Power indicator
	light will flash when ready. Then press

desired speed button for continuous operation at that speed. The indicator light by the selected speed will stay lit. You may change settings without stopping by pressing a new speed button.

NOTE: The Blender will operate only when pressing the POWER button (Power LED will flash) before selecting the desired speed.

IMPORTANT: If blending hot foods or liquids, do not fill to the top of the pitcher, and operate only on speed 1. Remove center cap and place towel over lid.

operating the blender

Cr_ushing ice

Your Blender offers an Ice feature. When selected, the Blender will automatically pulse for 30 seconds at staggered intervals at the optimal speed for crushing ice or other ingredients.

1	Before operating the Blender, make sure	2	Put ingredients into the pitcher and
1	the pitcher is properly positioned on	2	firmly place lid. Use up to 1 tray of
	the base.		cubed ice.

<![if ! IE]>

<![endif]>English

3	Press POWER, then press ICE. The
	indicator light will stay lit.

4	When the timed function is finished,
	Blender will stop. Press POWER to turn

off. Unplug Blender before removing the pitcher.

TIP: Process up to a full standard ice cube tray or 12-14 standard ice cubes at a time. Occasional stirring with a spatula will be helpful only when Blender is off. The Ice feature has been optimized to crush and chop ice without adding any liquid ingredients.

operating THE blender

Using Pulse mode

Your Blender offers a Pulse function.

1	Before operating the Blender, make sure	2	Put ingredients into the pitcher and
1	the pitcher is properly positioned on	2	firmly place lid.
	the base.

3	Press POWER, then press and hold the
	PULSE button for the desired amount of

blending time.

4	When finished, press POWER to turn
	off. Unplug Blender before removing

the pitcher.

operating the blender

Using the Blender_ pitcher_ ingr_edient cup, and Soft Star_t blending featur_e

•The Blender pitcher ingredient cup can be used to measure and add ingredients. Remove cup and add ingredients at speeds 1, 2, or 3. When operating at higher speeds with a full pitcher or with hot contents, stop the Blender and then add ingredients.

IMPORTANT: If blending hot foods or liquids, remove the center ingredient cup, and place a towel over the lid. Operate only on speed 1. Do not use Pulse or Ice feature for hot liquids.

•The Soft Start blending feature automatically starts the Blender at a lower speed to draw ingredients into the blades, then quickly increases to the selected speed for optimal performance. The Soft Start blending feature only works when a speed is selected and does not work with the Pulse or Ice features.

Speed contr_ol guide

Item					Speed
Blended ice drink. .		. . . .		. .	.	.Ice, 5
Cheesecake.. . . . . . . .				. .	.	.		5
Chopped fruits .	. . . . . .			. .	Pulse, 2
Chopped vegetables.		. . . .		. .	Pulse, 2
Cream cheese-based spread. .				. . . .	. .	. .	. .	1
Cream soup . .	. . . . . .			. .	.	.	.	1
Crushed/chopped ice		. . . .		. . .		.	. Ice
Dip. . . . . . . . . .	. . . .	. .						1
Finely chopped fresh fruits.			.	. .	.	.	. Ice
Finely chopped
fresh vegetables. . .		. . . .	. . .	. . . .	. .	. .	. Ice
Fluffy gelatin for pie/desserts .				. .	.	.	.	5
Frozen chopped fruit
(defrost slightly until it
can be probed with a
knife tip) . .	. . . . . .			. .	.	.	. Ice
Frozen yogurt-based drink .			.	. .	.	.	.	5
Fruit juice from
frozen concentrate .		. . .	. . .	.			1, 3
Fruit-based drink (thin). .			. .	. .	.	Ice, 5
Fruit-based drink (thick). . .			. . .			Ice, 1
Fruit-based sauce. .		. . . .		. . .		.	.	1
Grated hard cheese. . .		. . .	. . .	. . . .	. .	. .	. .	5

Item	Speed
Gravy . . . . . . . . . . . . . . . . .3
Ice milk-based drink. . . . . . .	. .Ice, 5
Meat salad for
sandwich filling . . . . . . . .	Pulse, 2
Mousse . . . . . . . . . . . . . . . 5
Oatmeal. . . . . . . . . . . . . .	4
Pancake batter . . . . . . . . . . . .	3
Pesto. . . . . . . . . . . . . . . . 2
Pureed fruit/Baby food. . . . . . . . . .4
Pureed meat/Baby food meat . . . . .	4

Pureed vegetables/Baby food

vegetables. . . . . . . . . . . . . 4

Salad dressing . . . . . . . . .	.	. .	3
Savory crumb topping . . . . . .	Pulse, 2
Sherbet-based drink. . . . . . .	.	. 1, 5
Smooth ricotta or
cottage cheese . . . . . . . .	.	. 1, 3
Streusel topping . . . . . . . .	.	. .	2
Sweet crumb topping. . . . . .	. Pulse, 2
Sweet crunch topping. . . . . .	Pulse, 2
Vegetable-based main dish sauce. .	.	.	. 1

Waffle batter . . . . . . . . . . . . . .3 White sauce . . . . . . . . . . . . . 1

<![if ! IE]>

<![endif]>English

Tips for great results

Quick tips

•If you’re making beverages using ice, start with ICE, then finish with Speed 5 in order to produce a smoother texture.

•Ice directly from the freezer will crush better than partially melted ice for snow.

•Smaller ice cubes can be chopped or crushed faster than large ones.

•For many ingredient mixtures, start the blending process at speed 1 to

thoroughly combine the ingredients. Then increase to a higher speed, as desired.

•If desired, remove center ingredient cup of pitcher lid to add liquids or ice cubes while the Blender is operating at speeds 1, 2, or 3.

•Stop the Blender before using utensils

in the pitcher. Use a rubber spatula to mix ingredients only when the Blender is off. Never use any utensil, including spatulas, in the pitcher while the motor is running.

•Cool hot foods, if possible, before blending. Begin blending warm foods

at speed 1. Increase to higher speeds, one at a time, if necessary.

•When blending hot foods or liquids, do not fill the blender pitcher to the top. Secure the lid, remove the center ingredient cup, and place a towel over the lid. Operate only on speed 1. Do not place bare hand on pitcher lid when processing hot foods or liquids.

How to...

Dissolve flavor_ed gelatin: Pour boiling water into the pitcher; add gelatin. Remove center ingredient cup, and place a towel over the lid. Blend at speed 1 until gelatin is

dissolved, about 10 to 30 seconds. Add other ingredients.

Make cookie, cr_acker_ or_ br_ead cr_umbs:

Break cookies, crackers, or bread into pieces about 4 cm in diameter. Place in pitcher. In pulse mode, cover and blend at speed 2, pulsing a few times, about 3 seconds each time, until reaching desired consistency.

Make a finer_ cr_umbs for_ pie and desser_t cr_usts: Break cookies, crackers, or bread into pieces about 4 cm in diameter and place in the pitcher. Pulse in shorts bursts until reaching desired consistency, about 20 to 30 seconds

Chop fr_uits and vegetables: Put 2 cups (475 mL) of fruit or vegetable chunks in pitcher. Use short runs of speed 1 until reaching desired consistency.

Pur_ee fr_uits: Place 2 cups (475 mL) canned or cooked fruit in pitcher. Add 2 to 4 tablespoons (30 to 60 mL) fruit juice or water per cup (240 mL) of fruit. Cover and blend at speed 4 about 5 to 10 seconds.

Pur_ee vegetables: Place 2 cups (475 mL) canned or cooked vegetables in pitcher. Add 2 to 4 tablespoons (30 to 60 ml) broth, water, or milk per cup (240 mL) of vegetables. Cover and blend at speed 4 about 10 to 20 seconds.

Pur_ee meats: Place cooked, cubed, tender meat in pitcher. Add 3 to 4 tablespoons (45 to 60 mL) broth, water, or milk per cup (240 mL) of meat. Cover and blend on

speed 1 for10 seconds. Stop the Blender and scrape sides of pitcher. Cover and blend on speed 4 for 10 to 20 seconds longer.

Take lumps out of gr_avy: If sauce or gravy becomes lumpy, place in the pitcher. Cover and blend at speed 3 until smooth, about 5 to 10 seconds.

Combine flour_ and liquid for_ thickening:

Place flour and liquid in pitcher. Cover and blend at speed 1 until smooth, about 5 to 10 seconds.

Pr_epar_e white sauce: Place milk, flour, and salt, if desired, in pitcher. Cover, and blend at speed 1 until well-mixed, about 5 to

10 seconds. Pour into saucepan and cook as usual.

Make smoothies: Place liquids and frozen ingredients in pitcher first, then add other ingredients on top. Cover and blend on Ice for 10 to 15 seconds, then speed 5 for 10 to 15 seconds, as desired.

Tips for great results

Pr_epar_e pancake or_ waffle batter_ fr_om mix: Place mix and other ingredients in pitcher. Cover and blend at speed 3 until well-mixed, 10 to 20 seconds. Stop the Blender and scrape sides of the pitcher

as needed.

Gr_ate cheese: Cut very cold cheese into 1.5 cm cubes. Place up to 1/2 cup (120 mL) cheese in the pitcher. Cover, and blend at speed 5 about 5 to 10 seconds. For hard cheeses, such as Parmesan, bring to room temperature, then blend at speed 5 for 10 to 15 seconds.

care and cleaning

Cleaning the Blender_

The Blender pitcher can be easily cleaned while still attached to the base, or individually.

•Clean the Blender thoroughly after every use.

•Do not immerse the Blender base or cord in water.

•Do not use abrasive cleansers or scouring pads.

<![if ! IE]>

<![endif]>English

1	To clean the Blender_ base, Clean
	Touch pad, cor_d, lids, and ingr_edient

cup: Wipe with a warm, damp cloth; wipe clean with a damp cloth, and dry with a soft cloth.

3	To clean pitcher_ individually: Wash
	pitcher in dishwasher on the top or

bottom rack, flipped upside down. Or handwash with soapy water, rinse and wipe dry.

2	To clean the pitcher_ while attached
	to the base: Keep the pitcher on the

Blender base, fill half full with warm (not hot) water, and add 1 or 2 drops of dishwashing liquid. Put the lid on the pitcher, press the speed 1 setting, and run the Blender for 5 to

10 seconds. Remove the pitcher and rinse with warm water.

IMPORTANT: Hand wash the lid and ingredient cup for best results.

Troubleshooting

IMPORTANT: The Blender will not operate at any speed unless the Power button is pressed first.

Blender_ does not oper_ate when a setting is selected

No indicator lights are lit.

All indicator lights are flashing at the same time.

One indicator light is flashing alternately.

Check to see if the Blender is plugged into a grounded 3-prong outlet. If it is, press POWER, then unplug the Blender. Plug

it back in to the same outlet, and Press POWER. If the Blender still does not work, check the fuse or circuit breaker on the electrical circuit the Blender is connected to and make sure the circuit is closed.

If Blender is plugged in, but nothing happens when POWER is pressed, and all indicator lights are flashing, the motor rotor may

be locked. Press POWER, then unplug the Blender. Plug it back in, then press POWER and select the desired speed.

If the Blender is plugged in, but will not start and one light is flashing alternately from all the other indicator lights, the Blender may have a stuck key. Press POWER to turn off the Blender, then unplug the Blender. Plug the Blender back in and press POWER to turn back on to reset the stuck key.

Blender_ stops while blending

All indicator lights are flashing at the same time.

All indicator lights are flashing alternately.

The Blender may be overloaded. If the Blender becomes overloaded when blending heavy ingredients, it will automatically shut off to avoid damage to the motor. Press POWER to reset the Blender and unplug the power cord. Remove the pitcher assembly from the base and divide contents into smaller batches. Adding liquid to the pitcher may also reduce the load on the Blender.

The Blender may be jammed. If it is jammed, the Blender will stop running to avoid damage to the motor. Press POWER to reset the Blender and unplug the power cord. Remove the pitcher assembly from the base and with a scraper, free the blades by breaking-up or removing the contents at the bottom of the pitcher.

If the problem cannot be fixed with the steps provided in this section, then contact an 14 authorized service center (see “Service and warranty” section).

Warranty

KitchenAid® Blender_ Warrr_anty for_ the 50 United States, the Distr_ict of Columbia, Puer_to Rico, and Canada

This warranty extends to the purchaser and any succeeding owner for Blender operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.

Length of Warrr_anty:	One Year Full Warranty from date of purchase.

KitchenAid Will Pay	Hassle-Free Replacement of your Blender.
for_ Your_ Choice of:	See the next page for details on how to arrange for service,
	or call the Customer eXperience Center toll-free at
	1-800-541-6390.
	OR
	The replacement parts and repair labor costs to correct
	defects in materials and workmanship. Service must be
	provided by an Authorized KitchenAid Service Center.

KitchenAid Will	A. Repairs when Blender is used in other than
Not Pay for_:	normal single family home use.
	B. Damage resulting from accident, alteration, misuse
	or abuse.
	C. Any shipping or handling costs to deliver your Blender
	to an Authorized Service Center.
	D. Replacement parts or repair labor costs for Blender
	operated outside the 50 United States,
	District of Columbia, Puerto Rico, and Canada.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY

BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

<![if ! IE]>

<![endif]>English

Warranty

Hassle-Fr_ee Replacement Warrr_anty –

50 United States, Distr_ict of Columbia, and Puer_to Rico

We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Blender should fail within the first year of ownership,

KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Blender returned to us. Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service.

If your Blender should fail within the first year of ownership, simply call our

toll-free Customer eXperience Center at 1-800-541-6390 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address. (No P.O. Box numbers, please.)

When you receive your replacement Blender, use the carton and packing materials to pack up your original Blender. In the carton, include your name and address on a sheet of paper along with a copy of the proof of purchase (register receipt, credit card slip, etc.).

Hassle-Fr_ee Replacement Warrr_anty – Canada

We’re so confident the quality of our products meets the exacting standards of the KitchenAid® brand that, if your Blender should fail within the first year of ownership,

KitchenAid Canada will replace your Blender with an identical or comparable replacement. Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service.

If your Blender should fail within the first year of ownership, take the Blender or ship collect to an Authorized KitchenAid Service Centre. In the carton include

your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.).

Your replacement Blender will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner call our toll-free Customer eXperience Centre at 1-800-807-6777.

Or write to us at:

Customer eXperience Centre KitchenAid Canada

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

Arrr_anging for_ Ser_vice after_ the Warrr_anty Expir_es, or_ Or_der_ing Accessor_ies and Replacement Par_ts

In the United States and Puer_to Rico:

For service information, or to order accessories or replacement parts, call tollfree at 1-800-541-6390 or write to: Customer eXperience Center, KitchenAid Portable Appliances,

P.O. Box 218, St. Joseph, MI 49085-0218

Outside the United States and Puer_to Rico:

Consult your local KitchenAid dealer or the store where you purchased the Blender for information on how to obtain service.

For_ ser_vice infor_mation in Canada:

Call toll-free 1-800-807-6777.

Or write to:

Customer eXperience Centre KitchenAid Canada

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

+ 36 hidden pages