KEYENCE CA-HX048M User Manual
Usage of dedicated cables
CAUTION
NOTICENOTICE
96M13065
Point
Point
Use the dedicated cables to connect the camera unit to the controller.
Straight type
L-shape type
Straight high-flex type
16x Speed 480-k pixels Camera
* Cables other than above can not be used.
Installation
CA-HX048C/CA-HX048M
Do not use this camera in the following locations:
Instruction Manual
Checking the Package Contents
This package includes the following items. Make sure that all of the items are
in the package.
CA-HX048C/CA-HX048M (Camera) . . . . . . . . . . . . . . . . . 1
Resin mounting bracket (attached to camera) . . . . . . . . . 1
Instruction Manual (this document)
Safety Precautions
Symbols
The following symbols are used for the list of precautions to ensure safety and
to prevent personal injury and/or property damage when using the device.
It indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
It indicates a situation which, if not avoided, could result in product
damage as well as property damage.
It indicates additional information on proper operation.
General precautions
• Verify that this device is operating normally in terms of functionality and
performance before the start of work and before the start of device
operation.
• Take appropriate safety measures to avoid any damage in case of device
failure.
• KEYENCE is unable to guarantee the function or performance of this
camera if it is used in a manner that differs from this camera specifications
contained in this manual or if this camera is modified.
• The functions and performance of this camera may not be satisfactory
depending on the operating conditions or operating environment if it is used
in combination with other devices. Use it with other devices only after
careful consideration.
•
Do not use this camera for protecting the human body.
• Turn off the power of this camera immediately if one of the
following incidents occurs. If you continue to use the device
while the abnormality persists, fire, electric shock, or
malfunction may result. Contact your KEYENCE office for
repair service.
When liquid such as water, oil, and chemicals or other
foreign materials enter inside the unit
CAUTION
When the strong impact is applied or the housing is damaged
When smoke, foul odor or abnormal noise is emitted from the unit
• Do not dismantle the camera, modify it, or connect it to
anything other than the supported controllers. Doing so may
result in fire, electrical shock, or equipment malfunction.
• Be sure to power off this camera and its accessories, when
you plug/unplug the cable. Otherwise a fire, electrical shock,
burn or malfunction could result.
Tips on Correct Use
Supported controllers
This camera is dedicated for use with the XG-8000 Series (version 5.4.0000
or later; excluding the XG-8800 and XG-8800L), XG-7000 Series (version
4.3.0000 or later), and CV-X Series (version 3.1.0000 or later) controllers.
Handling
Mounting
Be sure that the values are appropriate as specified below or lower when
mounting.
Tightening torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.5 Nm
Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 N
Precautions on settings
Depending on the photograph conditions (for example, when the camera
sensitivity is increased or the shutter speed is decreased) and the temperature
of the usage environment, point defects may occur and narrow lines may be
displayed on the screen.
This is not a malfunction. These phenomena arise due to the structure of the
camera and the special characteristics of CMOS sensors. If these phenomena
occur, examples of ways that you can rectify the situation include lowering the
usage temperature, lowering the camera sensitivity, and increasing the shutter
speed and ensuring that there is sufficient illumination by using an external light
source. You may also be able to improve the situation by using an illumination
expansion unit such as the CA-DC21E to synchronize the illumination and the
shutter.
General Cautions regarding CE Marking
KEYENCE checked this product's conformance to the EMC Directive with the
simultaneous use of supported controllers. Therefore, see the user's manual
of the supported controller that you are using when using this product in the
EU nations. This is not to guarantee the conformity to the EMC Directive for
the entire mechanical system created by the customer.
Mounting and Adjusting the Lens
Selecting the lens
The chart shown below indicates the relationship between the image
capturing field of view (the vertical direction of the camera) and the distance
to the object working distance. Refer to the chart to select the appropriate
lens.
Indications in the chart
•
The mark in the chart indicates the extension length of the Extension
tube. (The Extension tube is installed between the lens and the camera.)
•
The asterisk (*) in the chart indicates the lens model.
CA-CH3(3M), CA-CH5(5M), CA-CH10(10M)
CA-CH3L(3M), CA-CH5L(5M), CA-CH10L(10M)
CA-CH3R(3M), CA-CH5R(5M), CA-CH10R(10M)
• Locations where this camera is exposed to direct sunlight
• Locations where the surrounding air temperature exceeds or
drops below the specification range, or where the temperature
changes rapidly
• Locations which are poorly ventilated
• Locations where the relative humidity drops below 35% or
exceeds 85% RH, or where condensation occurs
• Locations where there are corrosive gas or flammable gas
• Locations where there are much dust, sodium, or iron powder
• Locations where water, oil, or chemicals may splash onto this
camera
• Locations where this camera may be directly subjected to
vibration or impact
NOTICENOTICE
NOTICENOTICE
• Locations where this camera may be affected by radiation
noise or static electricity.
• Keep this unit and cables away from high-voltage cables or
power lines. Otherwise, noise could cause malfunction or
accident.
• The camera is connected to a frame ground. A current
conducts between the power supply ground and the metal
parts and metal connectors of the camera itself and of items
such as the lens connected to the camera. Be sure to install
the camera in an insulated fashion such as by using the
included plastic mounting components. If an electric potential
difference or noise occurs at the installation location while
the camera is installed in an uninsulated fashion, camera
damage or malfunctions may occur.
• In case of transpor tation, use the same packaging as when
the unit was delivered to avoid damage.
• If the unit has any dirt on it, wipe it off with a cloth moistened
with a mild detergent, then rub with a dry cloth. Do not rub
with a wet cloth, benzene, thinner, or alcohol. Doing so could
change the color or shape of the unit.
• Do not allow excessive light (sunlight or intense illumination)
to enter into the camera for a long period of time. Doing so
may cause the image capturing surface to be burnt or be
damaged.
The values in the chart are typical values. Adjustment is required
after mounting the lens.
When the plastic part is not mounted
1000
100
10
1
10000100010010
Y: Y field of view (mm)
WD: Working distance (mm)
When using the high-resolution lens (CA-LH*(G)) [1/3”: (784 x 596)]
* If an Extension tube is used, the peripheral resolution may deteriorate.
(1) CA-LH4 (2) CA-LH8(G) (3) CA-LH12(G) (4) CA-LH16(G) (5) CA-LH25(G) (6) CA-LH35(G) (7) CA-LH50(G) (8) CA-LH75
(1) (2) (3) (4) (5)
(6)
(7)
(8)
100
60
60
40
20
10
10
40
30
30
20
20
15
10
5
5
5
1.5
1.5
1.5
1.0
1.5
0.5
0.5
0.5
0.5
10
10
5
20
15
10
5
1000
100
10
1
10000100010010
Y: Y field of view (mm)
WD: Working distance (mm)
(1) CA-LHR5 (2) CA-LHR8 (3) CA-LHR12 (4) CA-LHR16 (5) CA-LHR25 (6) CA-LHR35 (7) CA-LHR50
(1) (2) (3) (4) (5)
(6)
(7)
* If an Extension tube is used, the peripheral resolution may deteriorate.
When using the ultra high-resolution lens (CA-LHR*) [1/3”: (784 x 596)]
0.5
1.5
5
5
10
20
10
1.5
1.0
0.5
0.5
1.5
1.0
Copyright (c) 2014 KEYENCE CORPORATION. All rights reserved.
13065E 1074-1 96M13065 Printed in Japan
35.0
4 x M3
Depth: 4 max.
28.0
28.0
35.0
5.0
19.0
φ32.0
9.5
38.4
16 x M3
Depth: 4 max.
41.0
31.0
φ
17.0
7.2
Specifications
Product name
16x speed color
480-k pixels Camera
Model CA-HX048C CA-HX048M
Image receiving
element
Color CMOS image receiving
element
Square-lattice all-pixel
11/16x* speed reading
Unit cell size 4.8 m x 4.8 m
Image size Equivalent to 1/3-inch
Number of effective
pixels
Scanning system
•
•
In 470-k pixels mode 784(H) x 596(V)
In 310-k pixels mode 640(H) x 480(V)
In 240-k pixels mode 512(H) x 480(V)
At 11x speed: In 470-k pixels mode: 5.2 ms (monochrome), 5.3 ms (color)
At 16x speed*: In 470-k pixels mode: 2.9 ms
In 310-k pixels mode: 3.5 ms (monochrome), 3.6 ms (color)
In 240-k pixels mode: 2.8 ms (monochrome), 2.9 ms (color)
In 310-k pixels mode: 2.0 ms
In 240-k pixels mode: 1.7 ms
Pixel transfer frequency 130 MHz (11x)/195 MHz (16x)*
Transfer system Digital serial transfer
Electronic shutter
1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000,
Can specify from 0.022 to 1000 ms through n umerical value input
1/5000, 1/10000, 1/20000
Lens mount C mount
Ambient operating
temperature
Ambient operating
resistance
humidity
Environmental
Weight Approx. 190 g (not including lens)
* The 16x speed reading is supported when transferring data to an XG-8000 Series unit
with the XG-EC80L/CA-EC80L/CA-EC80HX equipped or when transferring data to a
CV-X200 Series unit with the CA-EC80L/CA-EC80HX equipped.
For details, see the user's manual of the supported controller that you are using.
35 to 85% RH (No condensation)
16x speed monochrome
480-k pixels Camera
Monochrome CMOS image
receiving element
Square-lattice all-pixel
11/16x* speed reading
Progressive
0 to +40°C
19.0
17.0
9.5
38.4
12.7 31.4
WARRANTIES AND DISCLAIMERS
(1) KEYENCE warrants the Products to be free of defects in materials and
workmanship for a period of one (1) year from the date of shipment. If any
models or samples were shown to Buyer, such models or samples were
used merely to illustrate the general type and quality of the Products and
not to represent that the Products would necessarily conform to said
models or samples. Any Products found to be defective must be shipped to
KEYENCE with all shipping costs paid by Buyer or offered to KEYENCE
for inspection and examination. Upon examination by KEYENCE,
KEYENCE, at its sole option, will refund the purchase price of, or repair or
replace at no charge any Products found to be defective. This warranty
does not apply to any defects resulting from any action of Buyer, including
but not limited to improper installation, improper interfacing, improper
repair, unauthorized modification, misapplication and mishandling, such as
exposure to excessive current, heat, coldness, moisture, vibration or
outdoors air. Components which wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various
Products. They are only suggestions, and it is Buyer's responsibility to
ascertain the fitness of the Products for Buyer’s intended use. KEYENCE
will not be responsible for any damages that may result from the use of the
Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are
not to be used internally in humans, for human transportation, as safety
devices or fail-safe systems, unless their written specifications state
otherwise. Should any Products/Samples be used in such a manner or
misused in any way, KEYENCE assumes no responsibility, and additionally
Buyer will indemnify KEYENCE and hold KEYENCE harmless from any
liability or damage whatsoever arising out of any misuse of the Products/
Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE
PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER. ALL
EXPRESS, IMPLIED, AND STATUTORY WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT
OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED.
IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE
LIABLE TO ANY PERSON OR ENTITY FOR ANY DIRECT, INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, ANY DAMAGES RESULTING
FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF
INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF
PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF
SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR
ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE
OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE
OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD
PARTY’S CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST
BUYER. In some jurisdictions, some of the foregoing warranty disclaimers
or damage limitations may not apply.
BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered
to a third party, Buyer must provide such third party with a copy of this
document, all specifications, manuals, catalogs, leaflets and written
information provided to Buyer pertaining to the Products/Samples.
E 1101-3
Outer Dimensions
CA-HX48C/CA-HX48M
When the plastic part is mounted (factory default)
45.0
10.0
23.4
10.6
25.4
34.9
4 x M4
Depth: 5 max.
1/4-20UNC
Depth: 6 max.
(85.0)
10.6
17.5
Loading...