Kenwood TK-8102H User Manual
TK-7102H/8102H
GENERAL FEATURES
• 50W (146-174, 136-162 MHz) Models
• 45W (450-490, 485-512, 400-430 MHz) Models
• 8 Channels (4 Channels Per Group)
• 2 Conventional Groups
• Normal Scan
• Backlit Keys
• Channel / Transmit / Busy LED’s
• 4 Channel Keys
• 2 Function Keys
• Up/Down Volume Keys
• Enhanced Kenwood Audio
• Front Panel Speaker
• Emergency Call Features
• QT/DQT
• DTMF Encode / Decode
• Special Alert Tone Patterns
• Busy Channel Lockout
1
2
Compact VHF/UHF/FM Mobile Radios
• Time Out Timer
• Accessory Interface Cable Option
• 8 Programmable I/O Ports
• Ignition Sense
• Horn Alert Output
• 16-Key DTMF Mic Option
• Windows Programming & Tuning
• Cloning
• MIL-STD-810 C/D/E/F
FleetSync
• PTT ID Digital ANI
• Emergency Status
4
5
®
3
6
Options Specifications
JQA-QMA1205
JQA-QMA1205
odel TK-7102H TK-8102H
M
■ KMC-30
icrophone
M
(supplied microphone
KMC-32
■
6-Key Keypad
1
Microphone
■ KES-3
xternal Speaker
E
GENERAL
Frequency Range
Type 1 146-174 MHz 450-490 MHz
ype 2 136-162 MHz 485-512 MHz
T
Type 3 - 400-430 MHz
umber of Channels 8 (4 Channels x 2 Groups)
N
hannel Spacing
C
Wide 25 kHz
arrow 12.5 kHz
N
Channel Step 2.5 kHz / 5 kHz 5 kHz / 6.25 kHz
perating Voltage 13.6V DC±15%
O
Current Drain
tandby 0.4 A
S
Receive 1.0 A
Transmit (High Power) 14.0 A
perating Temperature Range -30°C ~ +60°C
O
Frequency Stability ±2.5ppm
-30°C ~ +60°C)
(
.25 kHz / 7.5 kHz
6
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 28 MHz 40 MHz
ype 2 26 MHz 27 MHz
T
Type 3 - 30 MHz
Dimensions (W x H x D)
■ KLF-2
Line Noise Filter
■ KPS-15
DC Power Supply
eight (net)
w
(body only, approx.) 2.6 lbs (1.18 kg)
F
CC ID
Type 1 ALH32933210 ALH32943210
Type 2 ALH32933220 ALH32943220
Type 3 - ALH32943230
ECEIVER (Measurements made per TIA/EIA-603)
R
Sensitivity (12dB SINAD)
Wide
arrow
N
(160 mm x 43 mm x 137 mm)
Selectivity
Wide
Narrow 60 dB
Intermodulation Distortion
■ KMB-10
Key Lock Adapter
Wide
Narrow 60 dB
Spurious Response 75 dB
Audio Output (4W at 4 Ω) with less than 5% distortion)
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Output Power
50 W 45 W
Spurious Response 70 dB
(High Power)
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Modulation
Wide
Narrow 11KØF3E
FM Hum & Noise
Wide 45 dB
Narrow 40 dB
Audio Distortion Less than 3%
Microphone Impedance 600 Ω
Kenwood r eserves the righ t to ch ange specifications and fe atures wi thout pri or notice .
Windows is a r egistered trademark of Micr osoft Cor poration in the US and other countries.
®
FleetSync
is a registered trademark of Kenwood C orporation.
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Humidity 507.1/Procedure II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
.29” x 1.69” x 5.39”
6
.28 µV
0
0.35 µV
75 dB
70 dB
16KØF3E
footnotes from front:
1
DTMF includes PTT ID, Emergency ANI, Manual Encode
(KMC-32), Auto-Dial (9 numbers) & Stun.
2
Special Alert Tone Patterns operate for DTMF, selective call decode.
3
KCT-39 required for 4 CH remote control, ignition sense (KCT-18),
KGP-2A/B, KDS-100, data modems, external GPS interface.
4
KCT-39 & KCT-18 ignition sense cable options required.
5
KCT-39 required: Horn Alert operates for DTMF selective
call decode.
6
KPG-70D program software required: Windows
®
2000Me/XP.
ADS#07709 Printed in USA
Loading...