Kenwood DPX206U User Manual [ru]

DPX206U

DUAL DIN SIZED CD RECEIVER

INSTRUCTION MANUAL

DUALER DIN-GENORMTER CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-РЕСИВЕР РАЗМЕРА 2DIN

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

ПРИЙМАЧ CD ПОДВІЙНОГО DIN-РОЗМІРУ

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Notice:

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei

enthalt.

For Israel

Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU Hersteller:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Декларация соответствия относительно Директивы 2004/108/EC Электромагнитная совместимость Декларация соответствия относительно Директивы 2011/65/EU об ограничении содержания вредных веществ Производитель:

ДжейВиСи КЕНВУД Корпорейшн 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви. Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

Декларація про відповідність вимогам Директиви EMC 2004/108/EC Декларація про відповідність вимогам Директиви RoHS 2011/65/EU Виробник:

JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Представник у ЕС:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем, в течение которого потребитель данного товара может безопасно им пользоваться при условии соблюдения инструкции по эксплуатации данного товара, проводя необходимое обслуживание, включающее замену расходных материалов и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного свидетельства KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 3

RADIO 5

AUX 6

CD / USB / iPod / ANDROID 7

DISPLAY SETTINGS 9

AUDIO SETTINGS 10

TROUBLESHOOTING 11

MORE INFORMATION 12

INSTALLATION / CONNECTION 12

SPECIFICATIONS 15

How to read this manual

• Operations are explained mainly using buttons on the faceplate.

• English language is used for the display explanation in this manual.

• [

] indicates the selected items.

• (

XX) indicates references are

available on the stated page.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 14) When a call comes in, “CALL” appears. (The audio system pauses.)

• To continue listening to the audio system during a call, press

system resumes.

When the call ends, “CALL” disappears. (The audio system resumes.)

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

. “CALL” disappears and the audio

BASICS

Faceplate

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information

Loading slot Display window

Volume knob

(turn/press)

Press

• Press and hold to turn off the power.

Press the volume knob during playback to attenuate the sound.

• Press again to cancel.

Press

• Press iPod to enter iPod source directly.

Press

• Press and hold to scroll the current display information.

repeatedly.

Reset button

• Your preset adjustments will also be erased.

repeatedly.

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SELLANGUAGE”

1 Turn the volume knob to select [

(Russian), then press the knob.

[

ENG

] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS”

“VOLUME KNOB”.

2 Press the volume knob.

[

YES

] is selected for the initial setup.

3 Press the volume knob again.

“DEMOOFF” appears.

“PRESS” “VOLUMEKNOB”

ENG

] (English) or [

RUS

]

ENGLISH

GETTING STARTED

Set the clock

Press FNC to enter [

1 2 Turn the volume knob to select [ 3 Turn the volume knob to select [

FUNCTION

CLOCK

], then press the knob.

CLOCKADJUST

], then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Day

5 Turn the volume knob to select [ 6 Turn the volume knob to select [

Hour Minute

CLOCKFORMAT 12H

] or [

24H

], then press the knob.

7 Press and hold to exit.

To return to the previous setting item, press .

Set the initial settings

Press repeatedly to enter STANDBY.

1 2 Press FNC to enter [

• Pressing AUDIO enter [

FUNCTION

AUDIO CONTROL

] directly.

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

Default:

AUDIO CONTROL

SWITCH PREOUT

SP SELECT OFF/ 5/4/ 6×9/6/ OEM

REAR/ SUBWOOFER

connected to the line out terminals on the rear (through an external amplifier).

or 4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

: Selects whether rear speakers or a subwoofer are

: Selects according to the speaker size (5inches

DISPLAY

TUNER SETTING

SYSTEM

CLOCK

ENGLISH

РУССКИЙ

EASY MENU

PRESET TYPE

KEY BEEP

SOURCE SELECT

BUILT-IN AUX

CD READ 1

F/W UPDATE

UPDATE SYSTEM

F/W UP xx.xx

CLOCK DISPLAY

:Both display and button illumination change to white color when

entering [

FUNCTION

].;

OFF

remain as [

COLORSELECT

NORMAL

:Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW).; preset button, regardless of the selected band.

:Activates the keypress tone.;

:Enables AUX in source selection.;

:Automatically distinguishes between audio file disc and music CD.;

:Forces to play as a music CD. No sound can be heard if an audio file

disc is played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:The clock time is shown on the display even when the unit is turned

off.;

OFF

:Cancels.

Selected language is use as the display langauge for [ and Tag information (folder name, file name, song title, artist name, album name) if applicable.

:Both display and button illumination

] color. ( 9)

MIX

:Memorizes one station for each

OFF

:Deactivates.

OFF

:Disables. ( 6)

FUNCTION

] menu

RADIO

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly to select FM1/ FM2/ FM3/ MW/ LW. 3 Press S/T to search for a station.

• To change the searching method for S/T: Press and hold

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6)

Other settings

Press FNC to enter [

1 2 Turn the volume knob to make a selection (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

repeatedly.

FUNCTION

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET ON

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

PTY SEARCH

CLOCK

TIME SYNC

Default:

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.;

:Cancels.

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

:The unit will temporarily switch to News Programme if available. ;

OFF

:Cancels.

: Switches to another station only in the specific region using the “AF”

control.;

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language ( press the knob. Selects the available Program Type (see the following), then, press

S/T

:Synchronizes the unit’s time to the Radio Data System station time.;

OFF

:Cancels.

OFF

:Cancels.

OFF

to start.

NORMAL

:Cancels.

] is selected for [

OFF

ENGLISH/ FRENCH/ GERMAN

:Cancels.

OFF

: Cancels.

PRESETTYPE

]. ( 4)

), then

ENGLISH

RADIO

• [

LOCALSEEK

is selectable only when the band is FM1/ FM2/ FM3.

• Available Program Type:

SPEECH

MUSIC: POPM (music), ROCKM (music), EASYM (music), LIGHTM (music),

The unit will search for the Program Type categorized under [

[

MUSIC

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

]/ [

MONOSET

: NEWS

, AFFAIRS

SCIENCE

, VARIED

, TRAVEL

, LEISURE

CLASSICS

, OTHERM (music), JAZZ

FOLK M (music)

] if selected.

]/ [

NEWS SET

]/ [

REGIONAL

, INFO (information), SPORT

, WEATHER

, FINANCE

, DOCUMENT

, CHILDREN

, COUNTRY

]/ [

AF SET

]/ [TI]/ [

PTYSEARCH

, EDUCATE

, DRAMA

, RELIGION

SPEECH

, CULTURE

, PHONE

, SOCIAL

, NATIONM (music), OLDIES

] or

AUX

]

Preparation:

Select [

] for [

BUILT-IN AUX

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press FNC to enter [ 2 Turn the volume knob to select [ 3 Turn the volume knob to select [ 4 Turn the volume knob to make a selection, then press the knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press .

]. ( 4)

FUNCTION

SYSTEM

], then press the knob.

AUXNAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

Portable audio player

], then press the knob.

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

Label side

USB input terminal

USB

Eject disc

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102 / KCA-iP103 (optional

accessory) the iPod/iPhone

ANDROID

Micro USB 2.0 cable

or accessory cable of

(commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

To On the faceplate

Playback / pause Press .

Reverse / Fast-forward

Select a track/file

Select a folder

Repeat play

Press and hold S/T.

Press S/T.

Press / . Press repeatedly.

TRACK REPEAT/ REPEAT OFF FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

FILE REPEAT/ REPEAT OFF

Random play

Press repeatedly.

DISC RANDOM/ RANDOM OFF FOLDER RANDOM/ RANDOM OFF

Press and hold

: Audio CD

: MP3/WMA/WAV file,

iPod or ANDROID

: KME Light/ KMC file

: Audio CD

: MP3/WMA/WAV file, KME Light/

KMC file, iPod or ANDROID

to select

ALLRANDOM

ENGLISH

CD / USB / iPod / ANDROID

To On the faceplate

Select control mode

Select music drive (

9, [

MUSIC

DRIVE]

)

While in iPod source, press and hold iPod.

MODE ON

: Control from the iPod

MODE OFF

: Control from the unit

While in ANDROID source,

( 9, [

ANDROID SETUP])

Press 5 repeatedly.

The stored songs in the following start playback.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

12)

For ANDROID: Applicable only when [

SETUP

]

)

For CD: Only for MP3/WMA files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 12)

For CD: Only for MP3/WMA files.

You can still play/pause, file skip, fast-forward or reverse files from the unit.

BROWSE MODE

MODEOFF

] is selected. ( 9, [

]/ [

BROWSE MODE

] is selected.

ANDROID

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S/T to search at a preset skip search ratio. (

9, [

SKIP SEARCH

Press and hold S/T to search at a 10

])

ratio.

• Not applicable for CD and MP3/WMA/WAV files. For iPod:

You can search for a file according to the first character.

Press to enter character search. Turn the volume knob to select the character.

•

To search for a character other than A to Z and 0to9, enter only “

”.

• Press and hold / changes the characters rapidly.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press 5.

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

mode

)

• For ANDROID, applicable only when [

( 9, [

ANDROID SETUP])

MODEOFF

BROWSE MODE

] is selected. ( 

Select control

] is selected.

CD / USB / iPod / ANDROID

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press FNC to enter [

1 2 Turn the volume knob to make a selection (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

ANDROID SETUP

BROWSE MODE HANDMODE

using KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

MUSICDRIVE DRIVECHANGE

SKIPSEARCH 0.5%/ 1%/ 5%/ 10%

: Control from the unit (using KENWOOD MUSIC PLAY application).;

:Control other media player applications from the Android device (without

FUNCTION

automatically and playback starts. Repeat steps

KMC file, selects the skip search ratio over the total files.

:The next drive ([

to 3 to select the following drives.

DRIVE 1

] to [

DRIVE 5

: While listening to iPod, ANDROID or KME Light/

Default:

]) is selected

DISPLAY SETTINGS

1 Press FNC to enter [ 2 Turn the volume knob to select [ 3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press and hold to exit.

To return to the previous setting item, press .

COLOR SELECT VARIABLESCAN/ CUSTOM R/G/B/

DIMMER ON

BRIGHTNESS 0

TEXTSCROLL AUTO/ ONCE

Preset colors:

BLUE2 GREEN2 ORANGERED

RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/

BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/

GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/

FUNCTION

DISPLAY

], then press the knob.

button and display illumination color.

You can create your own color (when [ selected). The color you have created can be stored in [

Press and hold the volume knob to enter the detailed color adjustment.

Press S/T to select the color (R/ G/ B) to adjust.

3 Turn the volume knob to adjust the level (0 — 9), then press the knob.

:Dims the display illumination and button illumination.;

— 31: Selects your preferred brightness level for display illumination

and button illumination.

automatically, or scroll only once.;

:Selects whether to scroll the display information

preset colors*: Selects your preferred

CUSTOM R/G/B

OFF

:Cancels.

] or preset colors* is

CUSTOM R/G/B

Default:

OFF

:Cancels.

ENGLISH

AUDIO SETTINGS

While listening to any source...

1 Press AUDIO to enter [ 2 Turn the volume knob to make a selection (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

SUB-WLEVEL –15 BASSLEVEL –8 MIDLEVEL –8 TRELEVEL –8 EQ PRO

BASS ADJUST BASS CTR FRQ

BASS LEVEL –8 BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00 BASS EXTEND ON

MID ADJUST MID CTR FRQ 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ

MID LEVEL –8 MID Q FACTOR 0.75/ 1.00/ 1.25

TRE ADJUST TRE CTR FRQ 10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ

TRE LEVEL –8

AUDIOCONTROL

+15 (0

) Adjusts the subwoofer output level. to +8 (+6) to +8 (+5) to +8 (0)

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

60HZ/ 80HZ/ 100HZ/ 200HZ

frequency.

to +8 (+6):Adjusts the level.

:Turns on the extended bass.;

center frequency.

to +8 (+5):Adjusts the level.

center frequency.

to +8 (0):Adjusts the level.

:Adjusts the quality factor.

Default:

: Selects the center

OFF

:Cancels.

:Selects the

PRESET EQ DRIVEEQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ

BASSBOOST LEVEL1/ LEVEL2/ LEVEL3

LOUDNESS LEVEL1/ LEVEL2

SUBWOOFERSET ON

LPFSUBWOOFER THROUGH

SUB-WPHASE REVERSE

FADER R15

BALANCE L15

VOLUMEOFFSET

SOUNDRECNSTR

(Sound reconstruction)

• [

SUB-W LEVEL

selectable only if [

• [

SUB-WLEVEL

[

SUBWOOFERSET

NATURAL/ USER

(Select [ [

DRIVE EQ

running noise of the tyres.

OFF

:Cancels.

to produce a well-balanced sound at a low volume level.;

:Turns on the subwoofer output.;

160HZ

160Hz are sent to the subwoofer.

output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [ [

LPFSUBWOOFER

For AUX: adjustment level of each source. (Before adjustment, select the source you want to adjust.)

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

]/ [

SUBWOOFER SET

SWITCH PREOUT

]/ [

LPFSUBWOOFER

] is set to [ON].

:Selects a preset equalizer suitable to the music genre.

USER

] to use the customized settings.)

] is a preset equalizer that reduces noise outside the car or

:Selects your preferred bass boost level.;

:Selects your preferred low and high frequencies boost

OFF

:All signals are sent to the subwoofer.;

:Audio signals with frequencies lower than 85Hz/ 120Hz/

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer

].)

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

–8

to +8(0) ; For other sources: –8 to 0:Presets the volume

OFF

]/ [

LPF SUBWOOFER

] is set to [

]/ [

SUB-WPHASE

THROUGH

:Cancels.

]/ [

SUBWOOFER

] is selectable only if

:Cancels.

85HZ/ 120HZ

] is selected for

SUB-W PHASE

]. ( 4)

OFF

] is

:Cancels.

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

General

“PROTECTING SEND SERVICE” appears.

The unit does not work at all. Reset the unit. (

•

Radio reception is poor.

•

Static noise while listening

adio

to the radio.

Disc cannot be ejected.

Noise is generated. Skip to another track or change the disc. Tracks do not play back as

you intended them to play. “READING” keeps flashing. Do not use too many hierarchical levels or folders. Elapsed playing time is not

correct. Correct characters are not

displayed (e.g. album name).

CD / USB / iPod

“NA FILE” Make sure the disc contains supported audio files.

“NO DISC” Insert a playable disc into the loading slot. “TOC ERROR” Make sure the disc is clean and inserted properly. “PLEASE EJECT” Reset the unit. If this does not solve the problem,

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

3)

•

Connect the antenna firmly.

•

Pull the antenna out all the way.

Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. (

Playback order is determined when files are recorded.

This is caused by how the tracks are recorded.

This unit can only display uppercase letters, numbers, and a limited number of symbols. Uppercase Cyrillic letters can also be displayed if [ (

4)

(

12)

consult your nearest service center.

РУССКИЙ

3)

] is selected.

Symptom Remedy

“READ ERROR” Copy the files and folders onto the USB device again. If this

“NO DEVICE” Connect a USB device, and change the source to USB again. “COPY PRO” A copy-protected file is played. “NA DEVICE”

CD / USB / iPod

“NO MUSIC” Connect a USB device that contains playable audio files. “iPod ERROR”

•

Sound cannot

be heard during playback.

•

Sound output only

from the Android device.

Cannot playback at [

BROWSE MODE

ANDROID

“NO DEVICE” or “READING” keeps flashing.

Playback is intermittent or sound skips.

“ANDROID ERROR” / “NADEVICE”

does not solve the problem, reset the USB device or use another USB device.

Connect a supported USB device, and check the connections.

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in [

HAND MODE

on the Android device and start playback.

•

If in [

HAND MODE

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit. (

•

Make sure KENWOOD MUSIC PLAY APP is installed on the

Android device. (

•

Reconnect the Android device and make the appropriate

setting in [

•

If this does not solve the problem, the connected Android

device does not support [

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected Android

device does not support [

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

], launch any media player application

], relaunch the current media player

8)

ANDROID SETUP

]. ( 9)

BROWSE MODE

ENGLISH

12)

]. ( 12)

MORE INFORMATION INSTALLATION / CONNECTION

General

•

This unit can only play the following CDs:

•

Detailed information and notes about the playable audio

files are stated in an online manual on the following web site: www.kenwood.com/cs/ce/audiofile/

Playable files

•

Playable audio file: MP3 (.mp3), WMA (.wma)

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long

file name.

•

Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that

are dirty.

•

Recordable/ReWritable discs that have not been

finalized.

•

8cm CD. Attempting to insert using an adapter may

cause malfunction.

About USB devices

•

This unit can play MP3/WMA/WAV files stored on a USB

mass storage class device.

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than

5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is

other than 5V and exceeds 1A.

About KENWOOD Music Editor Light and KENWOOD Music Control

•

This unit supports the PC application KENWOOD

Music Editor Light and Android™ application KENWOOD Music Control.

•

When you play audio files with song data

added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.

•

KENWOOD Music Editor Light and KENWOOD

Music Control are available on the following web site: www.kenwood.com/cs/ce/

About iPod/iPhone

Made for

iPod touch (2nd, 3rd, 4th, and 5th generation)

iPod classic

iPod nano (3rd, 4th, 5th, 6th, and 7th

generation)

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C

•

For the latest compatible list and

software versions of iPhone/iPod, see: www.kenwood.com/cs/ce/ipod

•

You cannot operate iPod if “KENWOOD” or “ ” is

displayed on iPod.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above)

may not fully support Android Open Accessory (AOA) 2.0.

•

If the Android device supports both mass storage

class device and AOA 2.0, this unit always playback via AOA 2.0 as priority.

•

For more information and the latest compatible

list, see: www.kenwood.com/cs/ce/

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car

chassis or Ground wire (black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the

car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal

parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground wire

(black), or connect them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal,

connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers,

wipers, etc. on the car are working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis,

then replace the old fuse with one that has the same rating.

Basic procedure 1

Remove the key from the ignition switch, then disconnect the [ terminal of the car battery.

2 Connect the wires properly.

See Wiring connection. (

14)

3 Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the [ terminal of the car battery. 5 Reset the unit. ( 

)

INSTALLATION / CONNECTION

Installing the unit (in-dash mounting)

Do the required wiring. (

14)

Dashboard of your car

When installing without the mounting sleeve 1

Remove the mounting sleeve from the unit.

2 Align the holes in the unit (on both sides) with

the vehicle mounting bracket and secure the unit with screws (commercially available).

Use only the specified screws. Using wrong screws might

damage the unit.

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

How to remove the unit 1

Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.

2 Insert the extraction keys deeply into the slots

on each side, then follow the arrows as shown below.

Part list for installation

(A)

Mounting sleeve

(B)

Trim plate

(C)

Wiring harness

(D)

Extraction key

ENGLISH

Wiring connection

Front/ Rear/ subwoofer output

Antenna terminal

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring harness as illustrated below.

A7 (Red)

Vehicle

A4 (Yellow)

Default wiring

Color and function

A4 Yellow : Battery

A5 Blue/White : Power control A7 Red : Ignition (ACC) A8 Black : Earth (ground) connection B1

Purple B2 B3 B4 B5 B6 B7 B8

]

Purple/black

Gray

]

Gray/black

White

]

White/black

Green

]

Green/black

[

: Rear speaker (right)

: Front speaker (right)

: Front speaker (left)

: Rear speaker (left)

Ignition wire (Red)

Unit

Battery wire (Yellow)

Yellow (Battery wire)

Red (Ignition wire)

Red (A7)

Yellow (A4)

ISO connectors

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

Fuse (10A)

If no connections are made, do not let the wire come out from the tab.

Light blue/yellow (Steering remote

control wire)

Blue/White (Power control wire/

Antenna control wire)

STEERING WHEEL

REMOTE INPUT

REMOTE CONT

ANT CONT

P. CONT

To the steering wheel remote control adapter

To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle

To the terminal that is grounded

Brown (Mute control wire)

MUTE

when the telephone rings or during conversation ( (To connect the Kenwood navigation system, refer your navigations manual.)

2)

1414

SPECIFICATIONS

FM Frequency Range 87.5MHz — 108.0MHz (50kHz space)

Usable Sensitivity (S/N=26dB) 0.71μV/75Ω

Quieting Sensitivity (DINS/N=46dB)

Frequency Response (±3dB) 30Hz — 15kHz

Signal-to-Noise Ratio (MONO) 64dB

Tuner

Stereo Separation (1kHz) 40dB

MW Frequency Range 531kHz — 1611kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 28.2μV

LW Frequency Range 153kHz — 279kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 50μV

Laser Diode GaAIAs

Digital Filter (D/A) 8 times over sampling

Spindle Speed 500rpm — 200rpm (CLV)

Wow & Flutter Below measurable limit

Frequency Response (±1dB) 20Hz — 20kHz

Total Harmonic Distortion (1kHz) 0.01%

CD player

Signal-to-Noise Ratio (1kHz) 105 dB

Dynamic Range 90dB

Channel Separation 85dB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

2.0μV/75Ω

USB Standard USB1.1, USB2.0 (Full speed)

File System FAT12/16/32

Maximum Supply Current DC5V

USB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

WAV Decode Linear-PCM

Maximum Output Power 50W×4

Full Bandwidth Power 22W×4 (at less than 1% THD)

Speaker Impedance 4Ω—8Ω

Tone Action Bass 200Hz±8dB

Audio

Preout Level/Load (CD) 2500mV/10kΩ

Preout Impedance ≤600Ω



Frequency Response (±3dB) 20Hz—20kHz

Input Maximum Voltage 1000mV

Auxiliary

Input Impedance 30kΩ

Operating Voltage 14.4V (10.5V—16V allowable)



Maximum Current Consumption 10A

Operational Temperature Range 0°C—+40°C

General

Installation Size (W×H×D) 182mm×111mm×158mm

Weight 1.6kg

Subject to change without notice.

1A

Middle 2.5kHz±8dB

Treble 12.5kHz±8dB

ENGLISH

INHALT VOR DER INBETRIEBNAHME

VOR DER INBETRIEBNAHME 2

GRUNDLAGEN 3

ERSTE SCHRITTE 3

RADIO 5

AUX 6

CD / USB / iPod / ANDROID 7

DISPLAY-EINSTELLUNGEN 9

AUDIOEINSTELLUNGEN 10

FEHLERSUCHE 11

WEITERE INFORMATIONEN 12

EINBAU / ANSCHLUSS 12

TECHNISCHE DATEN 15

Warnung

Bedienen Sie keine Funktion, die Ihre Aufmerksamkeit vom Straßenverkehr ablenkt.

Vorsicht

Lautstärkeeinstellung:

•

Stellen Sie die Lautstärke so ein, dass Sie immer noch Geräusche von außerhalb des Fahrzeugs hören können, um Unfälle zu

vermeiden.

•

Senken Sie die Lautstärke vor dem Abspielen digitaler Tonquellen, um Beschädigung der Lautsprecher durch plötzliche

Tonspitzen zu vermeiden.

Allgemeines:

•

Vermeiden Sie Verwendung des externen Geräts, wenn dieses das sichere Fahren behindern kann.

•

Stellen Sie sicher, dass alle wichtigen Daten gesichert sind. Wir übernehmen keine Haftung für jeglichen Verlust

aufgenommener Daten.

•

Stellen Sie sicher, dass keine Metallgegenstände (wie etwa Münzen oder Werkzeuge) ins Innere des Geräts gelangen und

Kurzschlüsse verursachen.

•

Wenn ein Disc-Fehler durch Kondensationsbildung auf der Laserlinse auftritt, werfen Sie die Disc aus und warten Sie eine Zeit

lang, bis die Kondensation getrocknet ist.

Stummschaltung beim Empfang eines Telefonanrufs

Schließen Sie die MUTE-Leitung an Ihr Telefon mit einem im Handel erhältlichen Telefonzubehör an. ( 14) Wenn ein Anruf ankommt, wird “CALL” angezeigt. (Die Audiowiedergabe wird unterbrochen.)

•

Um die Audioanlage auch während eines Anrufs zu hören, drücken Sie . “CALL” verschwindet und die Wiedergabe

vom Audiosystem wird fortgesetzt.

Wenn der Anruf endet, verschwindet “CALL”. (Die Audiowiedergabe wird fortgesetzt.)

Wie Sie diese Anleitung lesen

•

Die Bedienung wird im Wesentlichen

anhand der Tasten auf der Frontblende erläutert.

•

Zur Erklärung des Displays wird in dieser

Anleitung English verwendet.

• [XX

] zeigt die gewählten Punkte an.

•

( XX) zeigt an, das

Bezugsinformationen auf der angegebenen Seitennummer vorhanden sind.

Wartung

Reinigung des Geräts: Wischen Sie die Frontblende mit einem trockenen Silikonlappen oder weichen Lappen sauber. Handhabung von Discs:

•

Berühren Sie nicht die Aufnahme-Oberfläche der Disc.

•

Kleben Sie keine Aufkleber oder ähnliches auf eine Disc. Verwenden Sie dem entsprechend auch keine Discs, auf denen sich

bereits ein Aufkleber befindet.

•

Verwenden Sie kein Zubehör für die Disc.

•

Reinigen Sie CDs stets von der Mitte einer Disc nach außen hin.

•

Reinigen Sie die Disc mit einem trockenen Silikonlappen oder weichen Lappen. Verwenden Sie keine Lösungsmittel.

•

Ziehen Sie Discs beim Entfernen aus dem Gerät horizontal heraus.

•

Entfernen Sie vor dem Einsetzen einer Disc die Grate vom Mittenloch und der Disc-Kante.

+ 42 hidden pages