JVC AV-21V311, AV-29V311, AV-29V331, AV-25V311 Manual

0 (0)

GGT0016-001A-E

0803-NIC-JMT

COLOUR TELEVISION

INSTRUCTIONS

Thank you for buying this JVC colour

television.

To make sure you understand how to

use your new TV, please read this

manual thoroughly before you begin.

AV-16N311

AV-21V311

AV-21V331

AV-21W311

AV-21Y311

AV-25V311

AV-25V331

AV-29V311

AV-29V331

Safety precautions

Preparation 3

1 Confirm which remote control you have

Insert the batteries into the remote control

3 Connecting the aerial and VCR

..................

4 Connecting other devices

..........................

Connect the power cord to the AC outlet

......

6 SETUP TOUR

..............................................

Basic operation 7

Remote control buttons and functions 8

MUTING button

.............................................

BASS button

..................................................

PICTURE BOOSTER button

...........................

COLOUR SYSTEM button

.............................

SOUND SYSTEM button

...............................

CINEMA SURROUND button

........................

DISPLAY button

.............................................

ECO SENSOR button

.....................................

PICTURE MODE button

...............................

OFF TIMER button

.......................................

RETURN + button

........................................

CHANNEL SCAN button

..............................

FAVORITE CH button

...................................

Using the TV’s menus 12

Basic operation

............................................

INPUT

...........................................................

PICTURE TILT

...............................................

VNR

...............................................................

COMPRESS (16:9)

........................................

AUTO SHUTOFF

..........................................

CHILD LOCK

.................................................

BLUE BACK

..................................................

VIDEO-2 SET

................................................

AUTO CH PRESET

.......................................

SETUP TOUR

...............................................

LANGUAGE

..................................................

MANUAL CH PRESET

..................................

SKIP

..............................................................

SUPER BASS

................................................

Picture Adjustments

....................................

Sound Adjustments

.....................................

AI VOLUME

..................................................

FAVORITE CH SETTING

...............................

VIDEO SETTING

...........................................

AI ECO SENSOR

..........................................

AI ECO DISPLAY

..........................................

Attaching the Twin Port Bass Blaster Unit 20

TV buttons and parts 21

Using the buttons on the TV 22

Troubleshooting 23

Specifications 24

Safety precautions

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING

THE USE OF THIS TV.

• Operate only from the power source specified on the TV.

•Avoid damaging the power cord and main plug. When you unplug the TV, pull it out

by the main plug. Do not pull on the power cord.

•Never block or cover the cabinet opening

for ventilation. Never install the TV where

good ventilation is unattainable. When

installing this TV, leave spaces for

ventilation around the TV more than the

minimum distances shown in the diagram.

• Do not allow objects or liquid into the

cabinet openings.

• In the event of a fault, unplug the TV and bring to JVC service centre. Do not attempt

to repair it by yourself or remove the rear cover.

• The surface of the TV screen is easily damaged. Be very careful with it when

handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth.

Never rub it forcefully. Never use any cleaner or detergent on it.

•When you don’t use this TV for a long period of time, be sure to disconnect the

power plug from the AC outlet.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled

with liquids, such as vases, shall be placed on the apparatus.

WARNING

<AV-21W311 only>

A removable plastic cover is fixed to the television’s front Audio/Video connector. To

prevent this cover from being accidentally swallowed by babies or children, remove it

from the television and store it in a safe place. If the cover is swallowed seek the

advice of a doctor immediately.

The Twin Port Bass Blaster Unit is packaged together with the TV.

Before you use the TV, mount the Twin Port Bass Blaster Unit correctly on the TV.

15 cm

10 cm

15 cm10 cm

Preparation

1 Confirm which remote control you have

Your TV comes with one of the three remote controls shown below. Functions you

can operate differ depending on the type of remote control.

RM-C1306

RM-C1308 RM-C1313

For TV model: For TV model: For TV model:

AV-21V311 AV-21V331 AV-16N311

AV-21W311 AV-25V331 AV-21Y311

AV-25V311 AV-29V331

AV-29V311

MUTING

OFF

TIMER

ECO

SENSOR

PICTURE

MODE

CHANNEL

SCAN

SYSTEM

COLOUR SOUND

CHANNEL

RETURN

POWER

DISPLAY

TV/VIDEO

VOLUME

123

456

789

CINEMA

SURROUND

RM-C1306

FAVORITE CH

MUTING BASS

OFF

TIMER

ECO

SENSOR

PICTURE

MODE

CHANNEL

SCAN

SYSTEM

COLOUR SOUND

CHANNEL

RETURN

POWER

DISPLAY

TV/VIDEO

VOLUME

123

456

789

CINEMA

SURROUND

FAVORITE CH

RM-C1308

MUTING

OFF

TIMER

ECO

SENSOR

PICTURE

MODE

CHANNEL

SCAN

SYSTEM

COLOUR SOUND

CHANNEL

RETURN

POWER

DISPLAY

TV/VIDEO

VOLUME

123

456

789

PICTURE

BOOSTER

RM-C1313

FAVORITE CH

2 Insert the batteries into the remote control

Correctly insert two batteries, observing the

and

polarities and inserting the

end first.

CAUTION:

Follow the cautions printed on the batteries.

Notes:

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new

batteries.

The supplied batteries are for testing, not regular use.

Preparation

3 Connecting the aerial and VCR

•Read the manuals provided with the devices. Depending on the device, the connection

method may be different from the diagrams. Also the device settings may need to change

depending on the connection method.

•Turn off all the devices including the TV.

• Connecting cables are not supplied.

• When connecting monaural audio to the TV, use the L/MONO jack.

• The AV-21Y311 and AV-16N311 are supplied with rod aerial but without matching aerial

adapters.

•You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector

with an S-VIDEO cable and enjoy the high quality picture of the S-VIDEO signal (Y/C

signal). In that case, do not connect it to the TV with a video cable.

• If you connect the VCR to the TV only with an aerial cable, you should preset the video

channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH

PRESET” on page 16 and preset it manually.

Connecting the aerial and VCR

VIDEO-1

INPUT

OUTPUT

COMPONENT

(

VIDEO-2

)

INPUT

RRRC

To RF

output

To video

output

VCR

VHF/UHF outdoor aerial

To aerial input

To audio

output

MONO

OVER

To S-video

output

• Illustration of AV-21Y311

VIDEO-1

INPUT

OUTPUT

COMPONENT

(

VIDEO-2

)

INPUT

MONO

Indoor aerial

Rod aerial

Install into the top-rear aerial holder. Once installed, it cannot be removed.

To install rod aerial:

Connecting the aerial

OVER

VHF/UHF outdoor aerial

Matching

aerial

adapter

(supplied)

(1)

(2)

(3)

Preparation

4 Connecting other devices

If you are not connecting any other devices, skip step 4 and perform step 5.

• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the

headphones, the TV speakers go off.

• The OUTPUT terminal outputs the video and sound signals which you are viewing on the

TV. You can dub them onto the VCR connected to the OUTPUT terminal.

(The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it

cannot output any signals when the TV is turned off.)

• Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player,

to the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 14.)

• The following illustrations are for the AV-21V311/AV-21V331/AV-25V311/AV-25V331. Your

TV’s front and rear panels may not look exactly like the illustrations.

Front

Camcorder or TV game

Headphones

Rear

VIDEO-1

INPUT

OUTPUT

COMPONENT

(

VIDEO-2

)

INPUT

RRR

VCR (for playing)

VCR (for recording)

DVD player

(composite signals)

DVD player

(component video signals)

MONO

OVER

5 Connect the power cord to the AC outlet

Operate only from the power source indicated on the rear of the TV.

Preparation

6 SETUP TOUR

When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo

is displayed. Follow the instructions on the on-screen display to perform the SETUP

TOUR.

• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET

function on the “MENU 3” menu. For details, see page 15.

1 Press the Main power button

on the TV.

The POWER lamp lights. After the

JVC logo has been displayed, the

TV automatically switches to the

language setting mode.

SETUP TOUR

2 Press the CHANNEL –/+ or

the MENU

buttons to

select the on-screen

language.

SETUP TOUR

LANGUAGE

ENGLISH

EXIT BY

OPERATE BY -+

DIS PLAY

3 The AUTO PROGRAMMING

function will start and the

indicator blinks.

STOP BY

SETUP TOUR

NOW PROGRAMMING

•To stop the AUTO PROGRAMMING

function, press the CHANNEL m or

the MENU

buttons.

When all the TV channels that can

be received on your TV have been

preset, the display goes out and

the AUTO PROGRAMMING

function operation is completed.

• If a TV channel you want to view is

not set to the channel, set it with the

MANUAL CH PRESET function.

For details, see page 16.

4 Upon the completion of

AUTO PROGRAMMING

function, the message below

is displayed.

SETUP TOUR

THANK YOU!

OFF

TIMER

ECO

SENSOR

SYSTEM

COLOUR SOUND

CINEMA

SURROUND

DISPLAY

TV/VIDEO

123

DISPLAY

button

MENU t

buttons

CHANNEL –/+

buttons

PICTURE

MODE

CHANNEL

SCAN

CHANNEL

RETURN+

VOLUME

456

789

POWER lamp

Main power button

The illustration below is for the remote

control RM-C1308. Your remote control

may not look exactly like the

illustration.

MUTING BASS

OFF

TIMER

ECO

SENSOR

PICTURE

MODE

CHANNEL

SCAN

SYSTEM

COLOUR SOUND

CHANNEL

RETURN

POWER

DISPLAY

TV/VIDEO

VOLUME

123

456

789

CINEMA

SURROUND

FAVORITE CH

RM-C1308

Basic operation

1 Press the POWER button to

turn your TV on.

• If your TV does not turn on, press the

Main power button on the TV, then

press the POWER button again.

•You can also turn on your TV by

pressing any of the following buttons;

- the CHANNEL

m button

- the Number buttons

- the TV/VIDEO button

2 Select a channel.

■ Press the CHANNEL m button.

• Up/down selection cannot be selected

for channels to which the SKIP has

been set to “YES”.

See page 17.

■ Press the Number buttons to enter

the channel number.

• If you want to enter a two-digit

number, press the -/-- button to select

the two digit mode “--”, then enter the

channel number.

3 Press the VOLUME –/+ button

to adjust the sound.

4To turn your TV off, press the

POWER button.

•We recommend that you press the Main

power button on the TV to turn the

main power off if you do not plan to use

your TV for a long time or if you wish

to save energy.

If the picture is not clear:

Press the COLOUR SYSTEM button

to select another colour system,

see page 8.

If the sound is not clear:

Press the SOUND SYSTEM button to

select another sound system, see page 8.

Viewing Images from an External

Device:

Press the TV/VIDEO button to select the

VIDEO mode.

•You can also use the INPUT function to

select the VIDEO mode. For details, refer to

page 13.

MUTING button

You can turn the sound off instantly.

Press this button.

To turn the sound on, press this button

again.

BASS button

AV -21V331/AV-25V331/AV-29V331 only

You can enjoy a powerful bass sound by

using the BASS (Bass Reflex) function.

Press this button to turn the BASS

function on or off.

• To use this function, you must first mount

the Twin Port Bass Blaster Unit packaged

with the TV on top of the TV. For details,

see page 20.

PICTURE BOOSTER button

When the picture is unclear because the

reception level of the TV signal is low,

activating the Picture Booster improves

the picture clarity in some situations.

Repeatedly press the PICTURE BOOSTER

button to select the desired mode.

HIGH:

The Picture Booster is functioning at

maximum.

LOW:

The Picture Booster is functioning at

minimum.

OFF:

The Picture Booster is off.

• If the picture becomes abnormal when you

set the Picture Booster to HIGH, then set it

to LOW or OFF.

COLOUR SYSTEM button

If the picture is not clear or no colour

appears, change the current colour

system to another colour system.

Press this button to select the colour

system.

AUTO PAL

SECAM

NTSC3.58

NTSC4.43

AUTO:

Automatic colour system selection.

•For the colour systems in each country or

region, see the table “Broadcasting systems”

on Back cover.

• If the picture is not normal in the AUTO

mode, change the AUTO mode to another

colour system.

SOUND SYSTEM button

If the sound is not clear even when the

picture appears normal, change the

current sound system to another sound

system.

Press this button to select the sound

system.

B/G MD/K

•For the sound systems in each country or

region, see the table “Broadcasting

systems” on Back cover.

•You cannot select any sound system when

in a VIDEO mode.

Remote control buttons and functions

+ 18 hidden pages

JVC AV-21V311, AV-29V311, AV-29V331, AV-25V311 Manual

Contents

Safety precautions

Preparation

Basic operation

Remote control buttons and functions