Jenn-Air CCGP2820P, CCGP2820PF, CCGP2820PG, CCGP2820PK, CCGP2820PR Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Jenn-Air

•

Product Model Number (s):

•

Prostyle™ Cooktop:

CCGP2820P, CCGP2820PF, CCGP2820PG,

CCGP2820PK, CCGP2820PR and CCGP2820PU

•

Dimensions (Actual Size)

•

Overall width:

46 13/16"

Overall depth:

24 9/16"

Cabinet Requirements

Minimum distance from top of countertop to

Wall View

(not to scale)

bottom cutout:

6 7/8"

Maximum distance from countertop to

bottom cutout: 9"

Recommended distance from countertop to

48"

bottom cutout: 8"

Cutout width and depth: see pg 3

30"

Minimum horizontal

Min. spacing from cooktop edge to nearest

18"

clearance between the

vertical combustible wall to the RIGHT: 2"

edge of the appliance

Min. spacing from cooktop edge to nearest

and combustible

construction extending

vertical combustible wall to the LEFT: 6"

Prostyle™ Cooktop

from the cooking surface

Min. spacing from cooktop edge to nearest

to 18" above the cooking

vertical combustible wall to the REAR: 15/16"

surface is 2" on the right

Minimum distance between cooktop and

side and 6" on the left

side.

cabinet directly above: 30"

Minimum

width of cabinet directly above: 48"

Maximum depth of cabinets directly

above and adjacent: 13"

•

Additional Information

•

• Cabinetry over cooktop : 30' minimum clearance

between the top of the cooking surface and the bottom

of an unprotected wood or metal cabinet. 24" minimum

when bottom of wood or metal cabinet is protected by

2 1/2"

not less than 1/4" flame retardant millboard covered

with not less than no. 28 MSG sheet steel, 0.015"

Center of Gas inlet

stainless steel, 0.024" aluminum or copper.

46 13/16"

• To eliminate the hazard of reaching over heated

surface units, cabinet storage space located above

the surface units should be avoided. If cabinet storage

is to be provided, the hazard can be reduced by

6

7/8"

installing a range hood that projects horizontally a

Gas inlet

minimum of 5" beyond the bottom of the cabinets.

• Countertop must be supported within 3" of cutout.

• See page 3 for special cutout instructions. For some

8 3/8" to center of gas inlet

cabinet styles, it may be necessary to reinforce the

Front View of Cooktop

front of the cabinet by attaching a brace from front to

(not to scale)

rear inside the cabinet under the burner box.

See page 2-3 for additional information

Subject to change without notice. This system is designed to

be updated daily if necessary. Dimension Express is not

responsible for use of superseded, voided, or outdated data

sheets. Because of the difficulty or impracticability of deter-

mining actual damages, liability of Dimension Express shall

not exceed $50.00.

Copyright © Dimension Express, 2002.

231

• NEVER reuse Data Sheets. Data Sheets are subject to change without

• Call Dimension Express if you have any questions at [phone] •

notice. Dimension Express is a FREE service bureau and is updated daily,

• Always refer to a current Code at a Glance or manufacturer directory •

it makes far more sense to spend the time necessary to request new Data

• Data Sheet codes change on the first of odd numbered months at 12:01am •

Sheets for each project, as opposed to the problems, time, costs, and risks

BN182.34 • A231B149C150 • • 032603 • 95655 • 50217

associated with reusing old Data Sheets.