Jenn-Air H303RQ, H303RA, H303RB, H303RS, H303RW Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Jenn-Air

View is looking at the Rear Top of the Unit

•

Product Model Number (s):

•

(not to scale)

Hoods:

H303RQ, H303RA, H303RB, H303RS and H303RW

12"

•

Dimensions (Actual Size)

•

Center Line

Width:

30"

2"

of Hood

Height : 6"

7 1/2"

Top Depth: 12"

Bottom Depth:

17 1/2"

6"

3/4"

Dimension from back to center

5"

line of top power supply hole: 2"

Dimension from top to center line

1 1/2"

of back power supply hole: 3/4"

Dimension from hood center line to

3/8"

center line of power supply holes:

7 1/2"

Knock-outs for

30"

Dimension from back to edge of

wiring connection

top exhaust outlet:

1 1/2"

17 1/2"

Dimension from top to edge

of back exhaust outlet: 3/8"

Distance from hood centerline to

edge of exhaust outlet: 5"

•

Additional Information

•

•Electrical Requirements: 120V, 60Hz, 2.2amps.

•For most efficient operation, the top of the hood should be 66" from the floor.

•Unit can be vented vertically by 3 1/4" x 10" duct or 6" round duct (or larger round duct). The unit can be vented horizontally by 3 1/4" x 10" duct only.

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.	292
• NEVER reuse Data Sheets. Data Sheets are subject to change without			• Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily,			• Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data			• Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks			BN110.1 • A292 • 31469 • 000805 • 18145 • 35961
associated with reusing old Data Sheets.