Integra DTM-5.3 Brochure

DTM-5.3

Stereo A/V Receiver with A-Bus

FEATURES

AMPLIFICATION:

•

2 x 130 Watts/Channel at 6 Ω

•

2 x 100 Watts/Channel at 8 Ω

•

Wide Range Amplifier Technology — WRAT (10 Hz - 100 kHz)

CONNECTIONS:

•

Exclusive A-BUS for multi-room

•

Composite video switching — 2 in, 1 out

•

Analog audio switching — 5 in, 3 out

•

Phono input

•

Rear IR input and output for zone 2

•

12V trigger input and zone 2 output

•

Line level zone 2 output

•

Subwoofer output

•

A/B speaker terminals and switching

MISCELLANEOUS:

•

Direct access tuning for discrete station selection

•

Unique IR codes for multiple receiver installations —

9 addressable command sets for independent operation

•

Solid brushed aluminum front panel

•

Five-way binding posts

•

Optional rack mount kit available-IRK-130-3

Designed to Integrate. Built to Stimulate.

DTM-5.3

SPECIFICATIONS

AMPLIFIER SECTION

Continous average power output (FTC):
100 W per channel min.

RMS at 8Ω,
both channels driven from
20 Hz to 20 kHz,
with no more than 0.08% total
harmonic distortion.

Dynamic power output: 2 x 170 Watts at 2Ω
2 x 135 Watts at 4Ω
2 x 140 Watts at 8Ω

Total harmonic distortion: 0.08% at rated power

Frequency Response: 20 Hz to 30 kHz; ±1 dB

Signal-to-noise ratio: 100 dB (IHF A. 0.5 V input)

IM Distortion: 0.08% at rated power

Damping Factor: 60 at 8Ω

Muting: -50 dB

INPUT SENSITIVITY AND IMPEDANCE

Line (CD, Tape 1-2, Video, DVD): 150 mV, 50 kΩ

OUTPUT LEVEL AND IMPEDANCE

Rec out (Tape 1-2, Video): 150 mV, 2.2 kΩ

Zone 2 line output: 150 mV, 2.2 kΩ

TONE CONTROL

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10,000 Hz

Stereo A/V Receiver with A-Bus

FM

Tuning range: 87.5–108.0 MHz (100-kHz steps)

Usable sensitivity, stereo: 17.2 dB f, 2.0 µV (75 ohms IHF)

AM

Tuning range: 530–1,710 kHz (10-kHz steps)

Usable sensitivity: 30 µV

PHONO

Input sensitivity: 2.5 mV, 50 k ohms

Overload: 120 mV RMS at 1 kHz, 0.5% THD

RIAA Deviation: 20 Hz to 20 kHz: ±0.8 dB

Signal-to-noise ratio: 80 dB (IHF A, 0.5 V input)

GENERAL

Power supply: AC 120 V, 60 Hz

Power consumption: 2.8 A

Dimensions (W x H x D): 17-1/8” x 5-7/8” x 13-7/16”

435 x 150 x 341 mm

Weight: 19.8 lbs. (9.0 kg)

Optional mounting kit: IRK-130-3

U dimension: 3U

Product features and specifications subject to change without notice.

Designed to Integrate. Built to Stimulate.