INDESIT BDE 961483X W UK N Daily Reference Guide

0 (0)
INDESIT BDE 961483X W UK N Daily Reference Guide

Quick Guide

THANKYOU FOR HAVING PURCHASED AN INDESIT PRODUCT.

To receive more comprehensive assistance, register the appliance on www.indesit.com/register

GB

Prior to using the appliance, carefully read the Safety and installation instructions.

Prior to using the appliance, the bolts used for transport must be removed. For detailed instructions on the removal procedure, consult the safety and installation instructions.

CONTROL PANEL

1. ON/OFF button

1

2

3

4

2.START/PAUSE button and indicator light

3.TEMPERATURE button

4. DISPLAY

5.OPTION button

6.DRYING ONLY button

7.DRYING button

8.DELAYED START button

9.SPIN button

10.WASH CYCLE SELECTOR KNOB

11. PUSH & GO button

WASH CYCLE TABLE

11

10

9 8

7 6 5

Maximum load 9 kg

Power input in off mode 0.5 W / in left-on mode 8 W

 

 

Temperature

Max.

Max.

 

 

 

load for

Duration

 

Wash cycle

 

 

 

spin speed

 

 

 

 

washing

(h : m)

 

Setting

 

Range

 

 

 

(rpm)

(kg)

 

1

Cotton (2)

40 °C

 

- 60 °C

1400

9.0

3:55

2

Synthetics (3)

40 °C

 

- 60 °C

1200

4.0

2:55

3

Mixed

40 °C

 

- 40 °C

1000

9.0

**

 

 

 

 

 

1351

9.0

3:40

4

Eco 40-60 (1)

40 °C

 

40°C

1351

4.5

2:50

 

 

 

 

 

1351

2.25

2:10

5

White

60 °C

 

- 90 °C

1400

9.0

2:45

6

Delicates

30 °C

 

- 30 °C

0

1.0

**

7

Colours

40 °C

 

- 40 °C

1400

9.0

**

8

Dark

30 °C

 

- 30 °C

800

5.0

**

9

Antiodour

40°C

 

- 40 °C

1000

3.5

**

10

20°C

20 °C

 

- 20 °C

1400

9.0

1:50

11

Wool

40 °C

 

- 40 °C

800

2.0

**

12

Rapid 30’

30 °C

 

- 30 °C

800

4.5

0:30

13

Wash&Dry 45‘

30 °C

 

30 °C

1400

1.0

**

14

AirFresh

 

**

15

Rinse + Spin

 

1400

9.0

**

16

Spin + Drain *

 

1400

9.0

**

Required dosage Optional dosage

 

 

 

 

1

Eco Cotton (4)

60 °C

 

60 °C

1400

9.0

3:40

 

 

 

 

 

 

 

 

The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected. The values given for programmes other than the Eco 40-60 programme are indicative only.

1) Eco 40-60 (Wash) - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient programme in terms of energy and water consumption for washing normally soiled cotton laundry.

Note: spin speed values shown on the display can slightly differs from the values stated in the table.

Eco 40-60 (Drying)- Test drying cycle in compliance with EU Ecodesign regulation 2019/2014. To access “wash and dry” cycle select “Eco 40-60” wash programme and set “Drying” option level to “ ”. The most efficient programme in terms of energy and water consumption for washing and drying normally soiled cotton laundry. (Cycle duration: full load 9h:20’ / half load 5h:10’).

PRODUCT DESCRIPTION

1.Top

2.Detergent dispenser drawer

3.Control panel

4.Handle

5.Porthole door

6.Drain pump (behind the plinth)

7.Plinth (removable)

8.Adjustable feet (2)

 

1.

2.

3.

 

4.

 

5.

 

6.

7.

 

 

8.

Drying

 

Detergents and

 

Additives

Max.

Wash

Fabric

load for

softener

drying

 

 

2

3

(kg)

6.0

 

 

4.0

 

 

6.0

 

 

 

 

 

6.0

 

 

 

 

 

6.0

 

 

1.0

 

 

6.0

 

 

5.0

 

 

3.5

 

 

6.0

 

 

2.0

 

 

4.5

 

 

1.0

 

 

1.5

6.0

 

6.0

 

 

 

Recommended

detergent

Powder

Liquid

– –

– –

– –

dampness

consumption

%

 

Residual (****)

Energy kWh

49

1.40

53

0.75

53

0.86

53

0.68

53

0.46

49

0.90

49

0.16

71

0.20

 

 

lt

°C

Totalwater

temperature

 

Laundry

105

45

55

43

54

38

54

37

40

34

90

55

90

22

45

27

 

 

 

6.0

 

 

 

 

53

1.17

60

 

 

 

 

 

 

 

 

 

 

For all testing institutes:

2)Long cotton cycle: set programme 1 at temperature 40°C.

3)Long synthetics cycle: set cycle 2 at a temperature of 40°C.

4)Eco Cotton - Test wash cycle in compliance with regulations 1061/2010. Set “1” wash cycle at a temperature of 60°C to access this cycles.

*By selecting the 16 cycle and excluding the spin cycle, the washer-dryer will drain only.

**The duration of the wash cycles can be checked on the display.

***After programme end and spinning with maximum selectable spin speed, in default programme setting.

DETERGENT DISPENSER DRAWER

Compartment 1:

C

Do not pour detergent into the compartment 1.

Detergent should only be poured into the

 

compartment 2.

 

Compartment 2: Washing detergent (powder

 

or liquid)

 

If liquid detergent is used, the removable plastic

 

partition A (supplied) should be used for proper

 

dosage. If powder detergent is used, insert the

 

partition into slot B.

 

Compartment 3: Additives (fabric softener, etc.)

 

The fabric softener must never exceed the “max”level indicated on the central pin.

!Use powder detergent for white cotton garments, for pre-washing, and for washing at temperatures over 60°C.

!Follow the instructions given on the detergent packaging.

!To remove the drawer, press lever C and pull the drawer outwards.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Cotton: suitable for washing towels, underwear, table cloths, etc. made of resistant linen and cotton that are moderately to heavily soiled.

Synthetics: specific for synthetic items. If the dirt is difficult to remove, the temperature can be increased up to 60° and powder detergent can be used too.

Mixed: for washing lightly to normally soiled resilient garments in cotton, linen, synthetic fibres and mixed fibres.

Eco 40-60: for washing normally soiled cotton garments declared to be washable at 40 °C or 60 °C, together in the same cycle. This is the standard cotton programme and the most efficient in terms of water and energy consumption.

White: suitable for resistant linen and cotton that are heavily soiled. Delicates: use programme 6 to wash very delicate garments. It is advisable to turn the garments inside out before washing them. For best results, use liquid detergent on delicate garments.

When selecting an exclusively time-based drying function, a drying cycle is performed at the end of the wash cycle that is particularly delicate, thanks to light handling and appropriate temperature control of the water jet.

The recommended durations are:

1 kg of synthetic garments --> 150 min

1 kg of synthetic and cotton garments --> 180 min 1 kg of cotton garments --> 180 min

The degree of dryness depends on the load and fabric composition. Colours: a 30°C cycle that helps to preserve colours, suitable for cotton or synthetic coloured garments. It allows for reducing electricity consumption for heating the water while guaranteeing good washing results. Suitable for lightly soiled garments.

Dark: use programme 8 to wash dark-coloured garments. This programme is designed to maintain dark colours over time. We recommend using a liquid detergent for the best results when washing dark-coloured garments.

When you select the drying function, at the end of the washing cycle the machine will automatically perform a delicate drying cycle that preserves the colours of the garments. The display will show the level“”. Max. load: 5 kg. Antiodour: use programme 9 for washing garments with bad odours (e.g. smoke, sweat, fried food). The programme is designed to remove bad odours while preserving the fabric fibres. Synthetics fabrics or mixed loads should be washed at 40°, and resistant cotton fabrics at 60°.

20°C: for washing lightly soiled cotton garments, at a temperature of 20 °C.

Wool - Woolmark Apparel Care - Blue:

The “Wool” wash cycle is approved by the Woolmark Company for washing wool garments classified as

“hand-washable”, provided that the wash complies with the instructions appearing on the garment’s label and

with those provided by the manufacturer of this washer-dryer. (M1318)

Rapid 30’: this programme is designed to wash lightly soiled garments at 30° (excluding wool and silk) with a 4.5 kg maximum load in a short time: it only lasts 30 minutes and allows for saving time and energy.

Wash&Dry 45’: select programme 13 for washing and drying lightly soiled garments (Cotton and Synthetic) in a short time. This cycle may be used to wash and dry a laundry load of up to 1 kg in just 45 minutes. To achieve optimum results, use liquid detergent and pre-treat cuffs, collars and stains.

AirFresh: ideal cycle to refresh garments and remove bad odours, in particular smoke, from cotton and synthetic items in 30’ (max. 1.5 kg) without the washing phase.

Rinse + Spin: designed for rinsing and spinning. Spin + Drain: designed to spin and drain the water.

Eco Cotton: for washing normally soiled cotton garments at 60°C.

DISPLAY

The display is useful when programming the machine and provides a lot of information.

B

A

 

C

 

D

The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the Delayed Start option has been set, the countdown to the start of the selected cycle will appear. Pressing the corresponding button allows you to view either the maximum spin speed, temperature and drying time values attained by the machine during the set wash cycle, or the values selected most recently (if compatible with the set wash cycle).

The hourglass flashes while the machine processes the data on the basis of the selected cycle. After a maximum of 10 minutes, the icon remains steady lit and the final time remaining is displayed. The “hourglass” icon will then switch off approximately 1 minute after the final time remaining has been displayed.

The “washing phases” relative to the selected cycle and the “washing phase” of the running cycle appear in section B:

Wash

Rinse Spin/ Drain Drying

When lit, the symbol

indicates that the set “Delayed Start” value has

appeared on the display.

 

There are three levels in section C relative to the washing options.

Section D includes the icons related to the three different drying levels as

well as the icon , which lights up when a timed drying option is set.

DOOR LOCKED INDICATOR

When lit, the symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns off before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE button ; if the symbol is off, the door can be opened.

FIRST-TIME USE

Once the appliance has been installed, and before it is used for the first time, run a wash cycle with detergent and no laundry, by setting the “Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the “TIPS AND SUGGESTIONS” section.

Rapid programming

- Press the ON/OFF button ; the START/PAUSE indicator light

will

flash slowly green.

 

-Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the cycle table.

-Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.

-Close the door.

-Press the PUSH & GO button to start the wash cycle.

Traditional programming

- Press the ON/OFF button ; the START/PAUSE indicator light will flash slowly green.

-Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the Wash Cycle Table.

-Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.

-Close the door.

-Use the WASH CYCLE selector knob to select the desired wash cycle: it will be associated with a specific temperature and spin speed that can be modified. The duration of the cycle will appear on the display.

-Modify the temperature and/or spin speed: the machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most recently-used settings if they are compatible

with the selected cycle. Pressing the

button gradually reduces the

temperature down to the cold wash “OFF” setting. Pressing the

button

gradually reduces the spin speed until it is completely excluded (“OFF” setting). Pressing these buttons again restores the maximum values.

- Select the desired options.

- Press the START/PAUSE

button to start the wash cycle; the relative

indicator light will light up steady green and the door will lock ( symbol on).

PAUSING A CYCLE

 

To pause the wash cycle, press the START/PAUSE

button again; the

indicator light will flash amber. If the

symbol is not lit, the door may be

opened. To start the wash cycle from the point at which it was

interrupted, press the START/PAUSE

button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot be opened. While a wash cycle is running, the door remains locked. To open the door while a cycle is under way, for example, to add or remove garments, press the START/PAUSE button to pause the cycle; the

indicator light will flash amber. If the symbol is not lit, the door may be opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washer-dryer using the START/PAUSE button (the relative indicator light will flash amber), then select the desired cycle and press the START/PAUSE button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF button. The cycle will be stopped and the machine will switch off.

END OF THE CYCLE

This will be indicated by the word “END” on the display; when the symbol switches off, the door may be opened. Open the door, unload the laundry and switch off the machine. If you do not press ON/OFF

button, the washing machine will switch off automatically after about a 10 minutes.

Loading...
+ 2 hidden pages