HP PSC 2170, PSC 2175, PSC 2175v, PSC 2175xi Setup Poster
START HERE
Turn on your PC
Install the software first
Windows 98, 2000, ME,
XP
Make sure you are using the
correct side of the poster.
Windows users: Follow the steps in order. Do
not connect the USB cable until instructed to do
so.
See your box for exact contents and system
requirements.
1
Windows desktop
3
a
Attach the cover
Turn your PC on and wait for the Windows
a
desktop to appear.
Close any open programs, including virus-
b
checking programs.
b
Insert the two bottom tabs of the
a
cover into the slots on the unit.
Tilt the cover down and press firmly.
b
Make sure the tabs lock into place
and the cover is even with the
device.
2
4
Insert the HP PSC software CD.
a
Follow the onscreen instructions.
b
Remove output tray and load paper
b
Use blank white paper to
prepare for print alignment.
When prompted to plug in the
c
device (as shown to the left), go to
step 3. Return to your computer in
step 9.
If nothing appears on your
computer screen after inserting
the CD, search for setup.exe on
the CD and double-click the file.
5
Connect the power cord and USB cable
a
b
a
Do not connect the USB cable
until you see the screen in Step
2. Do not connect the USB cable
to a keyboard or non-powered
hub.
c
d
e
Turn on your HP PSC
6
Turn power On and wait for display
prompt.
Note: See the reference guide for
adjusting the display viewing angle.
7
Make sure to remove any
packing material from inside the
device.
a
setup poster
Insert and align the print cartridges
b
c
d
Black label (56)
Color label (57)
Finish software setup
8
Look at the screen with the green
checkmark, and then continue. If you
see the screen with the red "X", follow
the instructions in the Readme.
e
g
Try your new HP PSC
9
f
Windows
hp psc 2170 series all-in-one
latches
Lift the print carriage door up
a
until it catches. Wait for the
print carriage to move to the
center. Lift the blue and gray
latches.
Remove the bright pink tape
b
from the print cartridges. Do not
touch the gold-colored contacts
or retape the cartridges.
Hold the black print cartridge with the label on
c
top as shown. Slide the cartridge into the right
(gray latch) side of the print carriage.
Hold the color print cartridge with the label on
d
top as shown. Slide the cartridge into the left
(blue latch) side of the print carriage.
Pull the end of the gray latch toward
e
you, press down until it stops, and then
release. Make sure the latch catches
below the bottom tabs. Repeat with the
blue latch.
Make sure both latches
f
are locked into position.
Close the door.
Press Enter on the front panel
g
to begin alignment. After a
page prints, alignment is
complete. Discard or recycle this
page.
Congratulations! You are
now ready to use the
HP PSC. Double-click the
Director icon to get
started.
Make sure there are five icons in
the HP Director window.
If not, see the reference guide.
www.hp.com/support Copyright Hewlett-Packard Company 2003
Printed in USA, Mexico, Germany, and Singapore.
1
Attach the cover
Remove output tray and load paper
2
Use blank white paper to
prepare for print alignment.
Macintosh
Q3066-90192
Make sure you are using the
*Q3066-90192*
*Q3066-90192*
correct side of the poster.
®
OS 9, OS X
3
a
b
Connect the USB cable
Insert the two bottom tabs of the
a
cover into the slots on the device.
Tilt the cover down and press firmly.
b
Make sure the tabs lock into place
and the cover is even with the
device.
a
4
b
Connect the power cord
c
d
e
Turn on your HP PSC
5
See your box for exact contents and
system requirements. Windows users:
see other side.
Insert and align the print cartridges
6
Make sure to remove any
packing material from inside
the device.
a
If you have an iMac, your USB port is on the
side. Do not connect the HP PSC to a USB port
on a keyboard or non-powered USB hub. See
the reference guide for more details.
b
c
Black label (56)
e
g
f
latches
Lift the print carriage door up until it
a
catches. Wait for the print carriage to move
to the center. Lift the blue and gray latches.
Remove the bright pink tape
b
from the print cartridge. Do not
touch the gold-colored contacts
or retape the cartridges.
d
Color label (57)
Hold the black print cartridge with the label on top
c
as shown. Slide the cartridge into the right (gray latch)
side of the print carriage.
Hold the color print cartridge with the label on top
d
as shown. Slide the cartridge into the left (blue latch)
side of the print carriage.
Pull the end of the gray latch toward you,
e
press down until it stops, and then release.
Make sure the latch catches below the
bottom tabs. Repeat with blue latch.
Make sure both latches
f
are locked into position.
Close the door.
Press Enter on the front panel to
g
begin alignment. After a page prints,
alignment is complete. Discard or
recycle this page.
Install the software
7
Macintosh setup poster
hp psc 2170 series all-in-one
Turn your Macintosh on and
a
wait for your Macintosh to
finish starting up. Insert the
HP PSC software CD.
Double-click the HP All-In-
b
One Installer icon on your
desktop.
hp_all-in-one_installer
Follow the onscreen instructions. You
c
may have to restart your Macintosh
during setup. Be sure to complete the
setup assistant.
Try your new HP PSC
8
Check the reference guide for
other ways to get started with
your HP PSC. The reference
guide also provides instructions
for changing the viewing angle
on the display.
Loading...