Compaq, the Compaq logo, and ProLiant are registered in U.S. Patent and Trademark Office.
Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United
States and other countries.
Intel is a trademark of Intel Corporation in the United States and other countries.
The Open Group and UNIX are trademarks of The Open Group in the United States and other
countries.
All other product names mentioned herein may be trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is provided “as is” without warranty of any kind and is subject to
change without notice. The warranties for Compaq products are set forth in the express limited
warranty statements accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
Compaq Compaq NC6136 Gigabit Server Adapter User Guide
Third Edition (June 2007)
Part Number 212419-00C
Contents
About This Guide
Symbols in Text.......................................................................................................... v
Compaq Technician Notes.......................................................................................... v
Where to Go for Additional Help............................................................................... vi
Compaq Customer Support........................................................................................ vi
Compaq Website................................................................................................ vii
PaqFax Number .................................................................................................vii
Calling the Compaq Support Line .....................................................................vii
This user guide can be used for reference when installing the Compaq NC6136 Gigabit Server
Adapter.
WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy
levels, only authorized service technicians should attempt to repair this equipment. Improper
repairs could create conditions that are hazardous.
IMPORTANT: The installation of options and servicing of this product shall be performed by individuals
who are knowledgeable of the procedures, precautions, and hazards associated with equipment
containing hazardous energy circuits.
Symbols in Text
These symbols may be found in the text of this guide. They have the following meanings.
WARNING: Text set off in this manner indicates that failure to follow directions in the warning
could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in
damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points of information.
Compaq Technician Notes
WARNING: Only authorized technicians trained by Compaq should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module level repair. Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs can create a safety hazard. Any
indications of component replacement or printed wiring board modifications may void any
warranty.
vi Compaq NC6136 Gigabit Server Adapter User Guide
WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy
levels, do not exceed the level of repair specified in these procedures. Because of the
complexity of the individual boards and subassemblies, do not attempt to make repairs at the
component level or to make modifications to any printed wiring board. Improper repairs could
create conditions that are hazardous.
WARNING: To reduce the risk of electric shock or damage to the equipment:
If the system has multiple power supplies, disconnect power from the system by
unplugging all power cords from the power supplies.
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at
all times.
CAUTION: To properly ventilate your system, you must provide at least 12 inches (30.5 cm) of
clearance at the front and back of the computer.
CAUTION: The computer is designed to be electrically grounded. To ensure proper operation,
plug the AC power cord into a properly grounded AC outlet only.
Where to Go for Additional Help
HP updates networking software frequently to include new functionality and features. Complete
the following steps to get the latest drivers, firmware, and documentation.
1. Go to the HP website (http://www.hp.com
2. Click Support and Troubleshooting Information from the left menu bar.
3. Type the product name in the for product box and press Enter. For example, type NC370T.
4. Download the drivers, firmware, or documentation as needed.
Compaq Customer Support
You can reach Compaq automated support services 24 hours a day, every day at no charge. The
services provide the most up-to-date information about Compaq products. You can access
installation instructions, troubleshooting information, and general product information from the
Compaq website.
Navigate to a specific product and then look for support information from this list of support
resources.
For a complete list of available SoftPaq files, navigate to:
http://www.compaq.com/support/files/allsp.html
Send email to:
support@compaq.com
PaqFax Number
The Compaq fax-on-demand retrieval system provides product-specific information. To use the
fax system, you must be in North America and you must have a fax machine or fax modem to
receive the automated fax transmittals. Call 1-800-345-1518, option 1, and request a product
catalog. After you receive the catalog, you can order the documents through the Compaq faxon-demand retrieval system.
About This Guide vii
Calling the Compaq Support Line
When you call the Compaq Support line, you must be at your server with your software running
and the product documentation at hand. The Compaq technician may ask for the following
information:
Your address and telephone number
The name and model number of the Compaq product you are calling about
The serial number of your Compaq product
The names and version numbers of the software you are using to operate the Compaq
product
The name and version number of the operating system you are using
The system type (manufacturer and model number)
The expansion boards or add-in cards in your server
The amount of memory in your server
viii Compaq NC6136 Gigabit Server Adapter User Guide
North America
The Compaq Customer Support department for North America can be reached at
1-800-652-6672 (1-800-OKCOMPAQ). For continuous quality improvement, calls may be
monitored or recorded.
Europe, the Middle East, and Africa
In Europe, the Middle East, and Africa, contact your local Compaq authorized service provider.
Details of your local Compaq authorized service provider can be obtained from your Compaq
authorized reseller, dealer, or from the Compaq website at
http://www.compaq.com
Worldwide Access
Compaq has technical support centers worldwide. Many of the centers are staffed by technicians
who speak the local languages. For a list of Compaq support centers, go to:
http://www.compaq.com
From the Compaq Worldwide home page, select your country and click Go to find the nearest
Compaq office.
Overview
The Compaq NC6136 Gigabit Server Adapter is a stand-alone, single port, 64-bit/66MHz PCI
Gigabit (1000BASE-SX) Ethernet adapter. It uses fiber-optic cable that provides failover
capabilities with other Gigabit and 10/100 adapters installed in a server. The NC6136 Gigabit
Server Adapter is a supported option for selected Compaq ProLiant™ servers.
For the latest functionality, features, and operating system support for this server adapter, see
the networking page at
The Compaq NC6136 Gigabit Server Adapter features delay and reduction of transmit
interrupts; EEPROM interface, including loadable configuration space fields; and elimination of
receive buffer alignment requirements. The adapter supports emerging standards for system
manageability and power management, such as ACPI. The NC6136 Server Adapter has a single,
fiber SC port and LED indicators for link and activity.
)
1-2 Compaq NC6136 Gigabit Server Adapter User Guide
t
1000-SX
Link LED
Activity LED
Fiber SC Por
(not used)
Figure 1-1. Fiber SC Port and LED locations
LED Indicators
The NC6136 Gigabit Server Adapter has two diagnostic LED indicators for the fiber SC port.
Table 1-1
LED Operations for the NC6136 Adapter
LED Name Display Description
LNK On The adapter is receiving power; the cable connection is good.
Off The adapter is not receiving power or the cable connection is
faulty.
ACT Blinking The adapter is sending or receiving network data.
Off The adapter is not sending or receiving network data.
Chapter 2
Installing the Adapter
This chapter describes installation precautions, how to install the adapter, and how to attach the
fiber network cable.
WARNING: To avoid the risk of personal injury or damage to the equipment, consult the Safety
information and user documentation provided with your equipment before attempting the
installation.
Many servers are capable of producing energy levels that are considered hazardous. Users
should not remove enclosures nor should they bypass the interlocks provided for removal of
these hazardous conditions.
Installation of this adapter should be performed by individuals who are both qualified in the
servicing of computer equipment and trained in the hazards associated with products capable
of producing hazardous energy levels.
NOTE: Before removing the cover of your server, refer to the Compaq documentation for the proper
methods for installing a PCI card and avoiding electric shock hazards.
Electrostatic Discharge Precautions
A discharge of static electricity from a finger or other conductor can damage components on the
adapter. This can make the adapter inoperable. In addition to the following information, see
Appendix B for more precautions.
To prevent electrostatic damage, observe the following precautions:
■ Always properly ground yourself when touching a static-sensitive component or assembly.
■ Avoid hand contact by transporting and storing parts in static-safe containers.
■ Keep electrostatic-sensitive parts in their containers until they arrive at static-free
locations.
■ Place parts on a grounded surface before removing them from their containers.
■ Avoid touching pins, leads, or circuitry.
2-2 Compaq NC6136 Gigabit Server Adapter User Guide
Installing the Adapter in a Server
Refer to the Compaq ProLiant documentation for the specific steps necessary to safely install a
PCI card in your server.
Figure 2-1. Installing the adapter in a server
1. If the server is not PCI Hot Plug compliant, power down the server and unplug the power
cord.
2. Remove both the server cover and the cover bracket from a PCI slot.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
CAUTION: If the device is not PCI Hot Plug compliant, power down the device and unplug the
power cord from the power outlet before removing the device cover. Failure to do so may
damage the adapter or computer.
3. Firmly seat the adapter in a PCI slot and secure the adapter bracket.
4. Replace the server cover and plug in the power cord.
Connecting the Fiber Network Cable
The NC6136 Server Adapter has one SC fiber port. This port supports 1000BASE-SX
multimode fiber cable with a maximum cable length dependent upon the fiber type, mode, and
cable size. See Appendix C for maximum cable lengths.
To insert the network SC connector into the adapter port, line up the slot on the fiber connector
with the adapter and gently push until the retainers click into place. Figure 2-2 shows the
installation of an SC fiber connector in an SC fiber port.
Figure 2-2. Installing an SC connector in an SC fiber port
Installing the Adapter 2-3
European Union Notice
Products with the C0E Marking comply with both the EMC Directive (89/336/EEC) and the
Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms (in
brackets are the equivalent international standards):
■ EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics
■ EN61000-3-3 (IEC61000-3-3) – Power Line Flicker
■ EN60950 (IEC950) – Product Safety
Appendix B
Electrostatic Discharge
To prevent damage to the system, be aware of the precautions you need to follow when setting
up the system or handling parts. A discharge of static electricity from a finger or other conductor
may damage system boards or other static-sensitive devices. This type of damage may reduce
the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
Avoid hand contact by transporting and storing products in static-safe containers.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
workstations.
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
Always be properly grounded when touching a static-sensitive component or assembly.
Grounding Methods
There are several methods for grounding. Use one or more of the following methods when
handling or installing electrostatic-sensitive parts:
Use a wrist strap connected by a ground cord to a grounded workstation or computer
chassis. Wrist straps are flexible straps with a minimum of 1 megohm ±10 percent
resistance in the ground cords. To provide proper ground, wear the strap snug against the
skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both
feet when standing on conductive floors or dissipating floor mats.
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have a Compaq
authorized reseller install the part.
NOTE: For more information on static electricity or assistance with product installation, contact your
Compaq authorized reseller.
NC6136 Gigabit Server Adapter Specifications
Table C-1
NC6136 Gigabit Adapter Specifications
Specification Description
Network Controller Chipset Intel 82543GC MAC
Data Transfer Method 64-bit/66MHz PCI, compatible with 64-bit/33MHz or 32-bit/33MHz