Hino 338 BROCHURE

2011 HINO 338

4 X 2 CONVENTIONAL GVW: 33,000 LBS. BBC: 108" ENGINE MODEL: J08E VB TURBO INTERCOOLE

DIMENSIONS

	Wheelbase		A in.	152.0/G	175.0/J	187.0/L	205.0/M	217.0/P	235.0/R	253.0/T	271.0/V
	Overall length		B in.	242.6	278.6	302.6	320.6	354.6	372.6	390.6	390.6
	Overall width		C in.	96.5	96.5	96.5	96.5	96.5	96.5	96.5	96.5
	Overall height		D in.	106.9	106.9	106.9	106.9	106.9	106.9	106.9	106.9
	Cab to axle		E in.	84.6	107.6	119.6	137.6	149.6	167.6	185.6	203.6
	Rear overhang		F in.	50.0	63.0	75.0	75.0	97.0	97.0	97.0	79.0
	Frame height at
		Front axle	G in.	36.6	36.6	36.6	36.6	36.6	36.6	36.6	36.6
		Rear axle	H in.	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	Road clearance		J in.	11.2	11.2	11.2	11.2	11.2	11.2	11.2	11.2
	(at di . axle)
	Tread
		Front	K in.	79.3	79.3	79.3	79.3	79.3	79.3	79.3	79.3
		Rear	L in.	72.2	72.2	72.2	72.2	72.2	72.2	72.2	72.2
	Turning radius
		Curb to Curb	ft.	42.0	47.5	50.5	54.8	57.7	62.1	66.4	70.8
		Wall to Wall	ft.	45.4	50.9	53.9	58.2	61.1	65.5	69.8	74.2

ENGINE

Model	J08E-VB
Type	Diesel 4-cycle, 6-cylinder in-line water-cooled,
	dry cylinder line
Combustion system	Direct injection type
Max. output (SAE Gross)	260HP at 2,500 rpm
Max. torque (SAE Gross)	660 lb.-ft. at 1,500 rpm
Bore and stroke	4.41 x 5.12 in.
Piston displacement	8 L
Fuel injection system	Common rail (HP-4)
Governor	Electronically controlled
Intake system	Turbocharged and intercooled
Air cleaner	Paper lter type (Donaldson)
Fan clutch	Bimetal thermostat sensor regulates fan speed
Glow plugs	Standard
Air compressor	Single cylinder, 15 cfm @ 1,250 rpm

CHASSIS WEIGHTS

	Total weight	lb.	10,480	10,580	10,660	10,840	10,920	11,000	11,040	11,100
MT
	Front axle	lb.	6,260	6,500	6,570	6,715	6,720	6,820	6,875	7,000
	Rear axle	lb.	4,220	4,080	4,090	4,125	4,200	4,180	4,165	4,100
	Total weight	lb.	10,670	10,770	10,850	11,020	11,110	11,190	11,220	11,290
AT
	Front axle	lb.	6,380	6,635	6,705	6,855	6,865	6,970	7,020	7,145
	Rear axle	lb.	4,290	4,135	4,145	4,165	4,245	4,220	4,200	4,145
	Total weight	lb.	10,530	10,630	10,710	10,880	10,970	11,040	11,090	11,140
AMT
	Front axle	lb.	6,285	6,530	6,600	6,745	6,760	6,840	6,910	7,015
	Rear axle	lb.	4,245	4,100	4,110	4,135	4,210	4,200	4,180	4,125

POWERTRAIN AND PERFORMANCE

33,000 lbs. GVW

Powertrain			STD	OPT	OPT	OPT	STD	OPT		OPT		OPT		OPT	OPT	OPT	OPT	OPT		OPT	STD	OPT		OPT	OPT		OPT
Max. speed mph			75	80	71	67	75	85		78		71		68	78	89	82	74		70	75	86		77	71		68
Startability (tan.θ) %			44.1	41.4	47.0	51.2	57.7	48.5		53.8		60.0		60.0	39.6	33.9	37.2	42.0		44.5	40.7	34.8		39.2	43.3		46.1
Transmission		Model		Eaton						Allison						Allison 2500RDS with								Eaton
				FS6406A					3000 RDS						Shift Energy Managerment								FO6406B
		Type	Six-speed Direct drive					Six-speed automatic								Six-speed automatic						Six-speed Over drive
			synchromesh 1st-6th
		1st.		9.008					3.487								3.512						6.545
		2nd.		5.270					1.864								1.896						4.125
		3rd.		3.220					1.409								1.439						2.518
Ratios		4th.		2.040					1.000								1.000						1.591
		5th.		1.361					0.750								0.737						1.000
		6th.		1.000					0.650								0.640						0.781
		Rev.		8.625					5.027								5.086						6.273
Rear axle gear 21K Axle			4.11	3.90	4.33	4.63	5.57	4.88		5.29		5.86		6.14	5.57	4.88	5.29	5.86		6.14	5.29	4.63		5.13	5.57		5.86
ratios		23K Axle	-	3.91	4.10	4.56	-	-		5.38		5.63		6.14	-	-	5.38	5.63		6.14	-	4.89		5.38	5.63		-
Tires (Standard)														11R22.5-14

*Performance data based on standard tires.

HINOWATCH

HinoWatch	3 year unlimited
(service	roadside assistance
free of	- Lockout
charge)	- Out of fuel
	- Battery jumpstart
	- Information
	- Warranty towing (2
	year coverage)

HINO TRUCKS RANKS “HIGHEST IN CUSTOMER SATISFACTION WITH CONVENTIONAL MEDIUM DUTY ENGINES AND TRANSMISSIONS, TWO YEARS IN A ROW.“

or J.D. Power & Associates award information, visit www.jdpower.com

BUSINESS IN MOTION	HINO.COM

2011 HINO 338

WEIGHT CAPACITIES

Front axle	lbs.	12,000
Front axle (option)	lbs.	10,000
Front axle (option)	lbs.	14,000
Rear axle	lbs.	21,000
Rear axle (option)	lbs.	23,000
Front spring	lbs.	12,000
Rear spring	lbs.	21,000

LIQUID CAPACITIES

Fuel tank	gal.	52
Cooling system	gal.	6.7: Eaton FS6406A/B
		6.6 Allison 3000RDS
Engine oil	qt.	16.2

AXLE/SUSPENSION

Front axle	MFS-12 series reversed Elliot, "I"
	beam with 12,000 lb (oil
	lubricated type)
Front spring	Taper-leaf springs shock absorber
Rear axle	RS21-145 series Fulloating,
	single reduction Single-speed
	by hypoid gearings
Rear spring	Semi-elliptic main and optional
	4,500 auxiliary rubber rear spring

FRAME

	Ladder type		Straight C Channel
	Width	in.	34
	Yield strength	PSI	80,000
	Resisting bending	in.-lbs.	1,280,000
	moment (one side)		(no reinforcement)

STEERING

Steering column	Tilt and telescopic with lock
	adjustability
Steering system	TRW recirculating ball, with
	hydraulic booster, integral type

CLUTCH

Type	Dry twin plate with damper
	springs Eaton-Spicer SAS1402
Facing material	Cerametallic
Facing outside (in.)	13.8
Control	Hydraulic

BRAKES

	Service brake		Full air, dual circuit, "S" cam
			type, leading & trailing shoes
			with automatic adjustment
	Disc diameter		Front (12K): 15 x 4 x 0.73
	x pad area (in. )		Front (14K): 16.5 x 5 x 0.73
	x thickness (in.)		Rear: 16.5 x 7 x 0.85
	Control		Full air dual circuit with
			Antilock Brake System (ABS)
	Parking brake		Spring brake acting on rear wheels
	Exhaust brake		Electric-pneumatic with valve in
			exhaust pipe
CHASSIS EQUIPMENT
	Radiator grille		Chrome
	Fuel tank		Aluminum
	Fuel prelter		Heated prelter (dust) and
			sedimenter (water)
	Re ectors		Two rear, two front side
	Tow hook		One at front
	Air dryer		NABCO, heated
	Air tank		68L

CAB EQUIPMENT

Air conditioning	Standard
Cab construction	All steel welded
Cigarette lighter	Equipped
Coat hook	One (rear panel)
Cruise control	Standard
Cup holders	Standard
Door pockets	Two
Driver's seat	2-way adjustable seat with
	arm rest and air suspension,
	covered with vinyl
Heater/Defroster	18,357 BTU/h
Mirrors, outside	Four, 1- at and 1-convex at
rearview	each side
Overhead consoles	Two
Passenger's seat	Bench type, covered with
	vinyl
Seat belts	3-point type (driver and
	passenger), one 2-point type
	(center)
Seating capacity	Three
Speakers	Two
Sun visors	Two
Ventilator	Electric forced air
Windshield	Laminated
Windshield wipers	Dual electric, 2-speed and
	intermittent

DASH INSTRUMENTATION

Meters and gauges ft. lb. system

Speedometer-mph (km/h)

Odometer (mile)

Fuel gauge / DEF gauge

Coolant temperature gauge

Engine tachometer

Warning and pilot lamps and buzzers/audio

Oil pressure warning lamp and buzzer

Brake pressure warning lamp and buzzer

Coolant level warning lamp and buzzer

Battery charging warning lamp

High beam indicator lamp

Turn signal pilot lamp

Parking brake warning lamp

Engine control system warning lamp

ABS warning lamp

DEF quantity and quality audio

Driver Information Display (multilingual)

Instant and trip fuel consumption

DPR monitor

Maintenance

Engine/vehicle diagnostics

ELECTRICAL EQUIPMENT

Batteries	Two, parallel connection,
	each 12V
Capacity	1200 CCA
Alternator	12 V, 130 A, brush Delco
Starter	12 V, 4.8 kW Denso
Engine shutdown	Equipped
Road speed limit	Equipped
Car audio	AM/FM radio with CD
Head lamps	Daytime running
Stop/Tail lamps
Back-up lamps
Sideasher lamp
Front side marker lamps

Trucklite LED marker lamps (front)

Electric horn (dual)

WHEELS/TIRES

	6 Wheels	22.5 x 8.25 10-stud disc.
	Wheel style	Steel, powder coated
	6 Tires	11R22.5(G)
	Tire brand and	Bridgestone Fr-rib Rr-lug type
	pattern

CAB CONFIGURATION OPTIONS

Extended Cab	30" cab extension, available with
	full width bench seat or 26" day
	bunk
Right hand drive,	Driver controls mounted on both
dual-steer sit	sides of cab
down
Right hand drive,	Driver controls mounted on both
dual-steer, stand	sides of cab, right hand side of cab
up	designed for operation while
	standing with easy entry/exit
Clean Chassis CA	Standard with 50 gal fuel tank
	mounted under cab (driver side)

OPTIONAL EQUIPMENT

Air horn

Air ride suspension - Hendrickson

Air ride suspension dump valve - Electric

Alternator - 12 V, 130 A, brushless Delco

Anti-Siphon device insert in fuel tank

Back-up aid alarm

Battery - Absorbed glass mat (AGM) 31 con guration, 1800 CCA

Battery - Two or three parallel connection each 12 V (GR27x3)

Battery - Two or three parallel connection each 12 V (GR31 type)

Bumper, front - Black and 4 inch extension (available 3 piece)

Bumper, front - White and 4 inch extension (available 3 piece)

Bumper, front - White 3 piece (available with one or two tow hooks)

Bumper, front - Chrome and 4 inch extension

Bumper, front - Chrome (available with one or two tow hooks)

Cab paint, exterior - Black or Red

Clutch - Eaton 1402 twin plate self-adjusting solo

Cold weather package

-Power heated mirrors (available in chrome)

-Engine block heater

-Bendix air dryer

Di erential lock with controls

Engine block heater

Engine idle shutdown

Exhaust system - Vertical stack type (NA with 95 gal. fuel tank)

Frame rail - 120,000 psi (34.1 frame width)

Fuel tank - Dual 52 gal (NA on G wheelbase)

Fuel tank - Single 95 gal.

GVW Derate 25,950

Mirrors, fender - Chrome (both sides or passenger only)

Mirrors, outside rearview - Chrome

Mirrors, outside rearview - Chrome, heated with marker light

Mirrors, outside rearview - Heated with marker light

Mirrors, power heated (available in Chrome)

Power windows and power door locks (available with keyless entry)

Seats - Fabric with reclining single person passenger seat

Seats - Vinyl with reclining single person passenger seat

Seats - Fabric with two person bench seat

Sears seat - vinyl black (upgrade driver seat only or with passenger seat upgrade)

Sears seat - fabric black/silver (upgrade driver seat only or with passenger seat upgrade)

Shock absorbers, rear

Stabilizer, rear (leaf suspension only)

Synthetic uids - Auto transmission and rear di erential

Tire pattern - Rib on rear

Tire size - 295/75R22.5-14(G) Bridgestone

Transmission, automatic - Allison 2500 RDS

Transmission, automatic - Allison 3000 RDS

Transmission, automatic - Eaton Ultrashift Highway Value

Wheels - Alcoa polished aluminum

NOTES: All speci cations of the products are with normal manufacturing allowances and tolerances. Hino Motors Sales U.S.A., Inc. reserves the right to alter	FORM NO. HSS 338 0210
speci cations at any time without previous notice. Some optional items of equipment many require extra time due to the need for their adaption on the product line.