DELUXE AIR BRUSH KIT
Model 95810 
ASSEMBLY and Operating Instructions
Visit our website at: http://www.harborfreight.com
Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10h
Specifications
Working air pressure: |
25 - 60 PSI |
|
|
|
|
Air Outlet Size: |
1/8” - 27 NPS |
|
|
|
|
Housing: |
Brass chrome plated, with blue anodized |
|
aluminum needle cover. |
||
|
||
Metal Cup: |
5 cc |
|
|
|
|
Glass Jar capacity: |
22 cc |
|
|
|
|
Glass Jar size: |
1-3/8” Diameter X 1-7/8” H |
|
|
|
|
Nozzle size: |
.35 mm |
|
|
|
|
Air Brush dimensions: |
6” L X 1-7/8” W X 3-1/2” H |
|
Air flow adjustable control: |
Manometer finger lever pressure |
|
regulator. |
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no serial number. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Wear protection. Always wear ANSI-approved safety goggles when using or servicing this Air Brush. Follow all safety warnings for the paint you are using.
3.Do not exceed maximum air pressure of 60 PSI.
4.Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Doing so may create sparks which may ignite the dust or fumes.
SKU 95810 |
For technical questions, please call 1-800-444-3353. |
Page 2 |
5.Keep bystanders, children, and visitors away while operating. Provide barriers or shields as needed.
6.Store idle tools out of reach of children. This Air Brush should not be in the hands of untrained users. It is not a toy and may be damaged if not used properly.
Never allow children to play with this product.
7.Maintain tools with care. Keep cutting tools clean. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
8.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
Service
1.Service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in damage to this Air Brush.
2.When servicing this Air Brush, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual.
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.This Air Brush is for spray painting only: Never use it for spraying gasoline, kerosene or other flammable solvent.
3.Avoid injury: NEVER direct compressed air from Air Brush at people or animals. NEVER direct airflow at eyes or ears.
4.Always maintain adequate ventilation, especially during clean up. Be sure to where ANSI-approved safety goggles and face mask whenever appropriate.
WARNING! This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
WARNING! The brass components of this product contain lead, a chemical none to the state of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.)
NOTE: All paints used with this Air Brush are fast drying by design and can seriously damage your tool if they are not flushed immediately after usage. NEVER let product sit inside the Air Brush unit for an extended period of time. Most of the paint you will be using can dry in minutes, or less.
SKU 95810 |
For technical questions, please call 1-800-444-3353. |
Page 3 |
Loading...