Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
IMPORTANT SAFEGUARDS
When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER – To reduce the risk of electrocution:
1.Always unplug this product immediately after using.
2.Do not use while bathing.
3.Do not place or store product where it can fall or be pulled into a tub or sink.
4.Do not place in or drop into water or other liquid.
5.Do not reach for a product that has fallen into water. Unplug immediately.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons.
1.Close supervision is necessary when this product is used by, on, or near children or invalids.
2.Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
3.Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
4.Keep the cord away from heated surfaces.
5.Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
6.Never use while sleeping or drowsy.
7.Never drop or insert any object into any opening or hose.
8.Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
9.Unplug this product before filling. Fill tank with water only unless otherwise specified by manufacturer. Do not overfill.
SAVE THESE INSTRUCTIONS.
Page 2 |
For technical questions, please call 1-888-866-5797. |
Item 3305 |
Cleaning
Caution Statements
To prevent serious injury from accidental operation, make sure the Power Switch of the
Ultrasonic Cleaner is in its “OFF” position and unplug the Ultrasonic Cleaner from its electrical outlet before performing any procedure in this section.
Instructions
1.After use, clean the water tank of the Ultrasonic Cleaner with a clean, damp cloth. Remove any oil and residue after each use.
2. Do not clean with flammable or corrosive liquids.
User Maintenance
Caution Statements
1.Product service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
2.When servicing this product, use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
3.Do not store the Ultrasonic Cleaner where it can fall or be pulled into a tub, sink or other free-standing pool of water.
4.WARNING! This product has no user serviceable parts.
Instructions
1.Before each use, inspect the general condition of the Ultrasonic Cleaner. Check for:
•loose hardware
•cracked or broken parts
•damaged electrical wiring, power plug or cord
•any other condition that may affect its safe operation.
If a problem occurs, have the problem corrected before further use.
Do not use damaged equipment.
2.Disconnect the Power Cord Plug from the power source before storing the Ultrasonic Cleaner to reduce the risk of starting the product accidentally.
3.Store the Ultrasonic Cleaner indoors in a dry location. Keep out of the reach of children and other untrained persons. Ultrasonic Cleaners are dangerous in the hands of untrained users.
4.Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
5.WARNING! If the supply cord of this Ultrasonic Cleaner is damaged, it must be replaced only by a qualified service technician.
Item 3305 |
For technical questions, please call 1-888-866-5797. |
Page 3 |
Loading...