PORTABLE CD-PLAYER
CDP 410/440
CDP 410/440 page 10
GENERAL |
CONTROLS |
CD handling
|
• Never write on a CD or attach any sticker to the CD. |
|
|
• To take the CD out of its box easily, press the centre spindle while lifting |
|
|
|
the CD. |
GB |
• |
Always hold the CD at the edge and always store it in its box after use |
|
with the label facing up. |
|
• Do not expose the CD player, batteries or CDs to rain and dampness (e.g. dripping or splashing), sand and dust or to excessive heat caused by heating equipment, or to direct sunlight, for example inside a car parked in the sun.
• When a newly purchased CD does not stay on the hub, this is caused by small burrs around the center hole of the CD.
• Remove the burrs by rubbing the edge of the center hole with a pen or other such instrument.
Maintenance
•The lens of the CD player should never be touched!
•The mechanical parts of the CD player contain self-lubricating bearings and must not be oiled or lubricated.
•You can clean the CD player cabinet with a soft and slightly dampened chamois leather.
Do not use any cleaning agents as they may have a corrosive effect.
•The lens may cloud over when the set is suddenly moved from cold to warm surroundings. Playing a CD is then not possible.
Leave the CD player in a warm environment until the moisture evaporates.
•To remove dust and dirt from the CD, breathe on the CD and wipe it with a soft, lint-free cloth in a straight line from the center towards the edge. Cleaning agents may damage the CD.
Warning
CLASS 1 LASER PRODUCT means that the laser´s construction makes it inherently safe so that the legally prescribed maximum permissible radiation values can never be exceeded.
CAUTION: Using any equipment or devices other than those described and specified in these operating instructions, or tampering with the unit in any way, can result in dangerous exposure to radiation.
2 |
1 |
X |
CLASS 1
LASER PRODUCT
The display indicates:
|
INT |
P |
1 ALL |
LOCK |
|
ANTI-SHOCK |
|
|
|
|
DAS |
TRACK |
MIN |
SEC |
P : |
during programming or programme |
|||
: |
playback |
|
|
|
during the RANDOM function |
||||
INTRO: |
during the INTRO function |
|||
ALL: |
during the REPEAT function (repeat all) |
|||
1 |
flashing: repeat one title |
|||
LOCK: when LOCK is activated and any button is pressed.
: flashing: the batteries are weak; continuously: the battery voltage is too low
88: track number playing time
when DAS is activated
Earphone control jack (PHONE)
•Connect the supplied earphones (3.5 mm jack plug) to the PHONE jack.
USING EARPHONES – Caution...
Do not play your earphones at a high volume. Operation at high volume can endanger yourself and others in traffic. You should therefore always adjust the volume so that you can still notice ambient noises (e.g. horns, rescue vehicles, police cars, etc.)
Note: This CD portable/headphone set complies with the requirements of article LL44.5 and 6 of the Public Health Code.
The performances of this product guarantee optimal listening at medium volume. Continuous use at high volume can damage the user’s hearing.
10
CDP 410/440 page 11
CONTROLS |
DAS / LOCK |
DAS |
MODE |
PROG 9 STOP S |
T |
|||||||||
|
|
|
|
|
|
|
|
SEARCH |
SKIP |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2; |
PLAY/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
PAUSE |
|
|
|
|
|
|
|
|
|
|
|
|
Batteries |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LOCK |
|
|
|
|
|
|
|
|
|
|
|
|
DC 6.0V |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
+>- |
|||||||||||
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PHONE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
OPEN |
|
|
|
|
|
LINE OUT |
|||||
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
UBS VOLUME |
|||||||||
2; PLAY/ – to start and interrupt playback
PAUSE
PROG – to select the program function
–to store musical pieces in a program using activated programming mode
MODE – to select the play functions
DAS – to switch the DAS function on and off
STOP – to stop playback
SEARCH S – to skip and search backward SKIP T – to skip and search forward
DC 6.0 V
+>- – jack for external power supply PHONE – earphone jack (3.5 mm)
LINE OUT – jack for connection to a HiFi system.
VOLUME – to adjust the volume
UBS – (Ultra Bass System) to boost the bass response
OPEN – to open the lid of the CD player LOCK – to lock all button functions
Bottom of the set:
Batteries – for inserting 2 LR 6 (AA) alkaline batteries or rechargeable batteries.
DAS – Digital Anti shock System
The DAS memory of the model CDP 440 stores the CD data (music) for 40 seconds in advance in order to prevent interruption during play caused by shock and vibration.
The DAS memory of the model CDP 410 stores the GB CD data for 10 seconds in advance.
•Activate the DAS memory by pressing the DAS button once.
– The Anti Shock symbol |
|
|
|
in the display starts |
|
|
|
filling, the display shows ANTI-SHOCK |
|
|
|
for example: |
DAS TRACK |
MIN |
SEC |
–The state of the DAS symbol in the display changes according to the state of the DAS memory.
•To disable this function, press the DAS button once more.
Note: When switching the DAS feature on and off, CD play will be delayed or interrupted for a short time.
•As the Digital Anti shock System requires more energy, it is advisable to switch it off when the playing conditions are good, in order to save battery life.
Lock function
The ‘LOCK’ function locks the button function to prevent accidental activation (for example while travelling).
• Set LOCK to ON position.
– Now, the CD player buttons will not operate.
The 'LOCK' indication |
|
|
|
LOCK |
lights up on the display. |
|
|
|
|
|
|
|
|
|
• To deactivate this |
|
|
|
|
|
|
|
|
|
ANTI-SHOCK |
|
|
||
function, reset LOCK to |
DAS TRACK |
MIN |
SEC |
|
|
|
|
|
|
OFF.
•The device cannot be switched on in LOCK ON position.
11
Loading...