Page 1
Quick Guide
Getinge Aquadis 56
56M, 56A
Loading and starting a program
1. In the Select Program view, tap Open Door.
2. Load the chamber.
3. Select a program on the touchscreen.
4. Tap Start Program and the door will close.
On the manually operated door, grasp the handle and close the door by hand.
The program start can be interrupted while the door is closing by pressing Open Door. When
the door is completely open, a new program can be selected.
During program
The Status view shows the time remaining.
Hold program
1. In the Status view, tap Abort.
Hold, which allows the door to be opened.
2. Tap
3. Tap Continue to resume the program.
Abort program (possible at any time during a program)
1. In the Status view, tap Abort.
2. Tap Abort.
Unloading
When the program is successfully completed, the Complete view is displayed.
1. Unload the chamber.
2. Check the cleaning result.
3. Tap Close Door.
On the manually operated door, grasp the handle and close the door by hand.
Warnings
1. Note the message, error code and phase displayed.
2. Tap Guide for more details.
3. Tap Confirm.
4. Take action according to the Alarms and warnings list in the User manual.
(only possible in the first pre-rinse phase)
Alarms
1. Tap Mute Alarm to silence the signal.
2. Note the message, error code and phase displayed.
Guide for more details.
3. Tap
4. Take action according to the Warnings and alarms list in the User manual.
5. Login.
6. Tap Confirm Alarm.
Read the manual!
Before using the machine, read the User manual and follow the safety regulations stated.
<Doc_QGE><Doc_6002466702><Rev.A><Lang_en><2021-12-14>
Loading...