General Semiconductor TPSMB9.1A, TPSMB8.2A, TPSMB9.1, TPSMB8.2, TPSMB7.5A Datasheet

...

TPSMB6.8 THRU TPSMB43A

SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 - 43 Volts Peak Pulse Power - 600 Watts

FEATURES

♦ Plastic package has Underwriters Laboratory

Flammability Classification 94V-0

♦ Easy pick and place ♦ Low profile package ♦ Built-in strain relief ideal for automated placement ♦ Exclusive patented PAR™ oxide passivated

chip construction

♦ 600W peak pulse power capability with a 10/1000µs

waveform, repetition rate (duty cycle): 0.01%

♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than

1.0ps from 0 Volts to V

(BR)

♦ For devices with V

(BR)

≥10V IDis typically less than 2.0µA

at TA=150°C

♦ Designed for under the hood surface mount

applications

♦ High temperature soldering:

250°C/10 seconds at terminals

MECHANICAL DATA

Case: JEDEC DO-214AA molded plastic body over

passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026

Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.003 ounces, 0.093 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS VALUE UNITS

Peak pulse power dissipation with a 10/1000µs waveform

(NOTES 1,2, FIG. 1)

PPM

Minimum 600 Watts

Peak pulse current with a 10/1000µs waveform

(NOTE 1, FIG. 3)

PPM SEE TABLE 1

Amps

Peak forward surge current

8.3ms single half sine-wave superimposed on I

FSM

70.0 Amps

rated load (JEDEC Method)

(NOTES 2, 3)

Instantaneous forward voltage at 50A

(NOTE 3)

3.5 Volts

Operating junction and storage temperature range T

, T

STG

-65 to +185 °C

NOTES:

(1) Non-repetitive current pulse, per Fig.3 and derated above T

=25°C per Fig. 2 (2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) land areas per figure (3) Mounted on 8.3ms single half sine-wave duty cycle=4 pulses per minute maximum

1/21/99

Available in uni-directional only

DO-214AA

Modified J-Bend

Dimensions in inches and (millimeters)

0.160 (4.06)

0.180 (4.57)

0.006 (0.152)

0.012 (0.305)

0.030 (0.76)

0.060 (1.52)

0.008 (0.203)

0.205 (5.21)

0.220 (5.59)

0.084 (2.13)

0.096 (2.44)

0.077 (1.95)

0.086 (2.20)

0.130 (3.30)

0.155 (3.94)

MAX.

PATENTED

ELECTRICAL CHARACTERISTICS at (T

=25°C unless otherwise noted) TABLE 1

Maximum Maximum

Reverse Reverse Maximum Maximum

Device Breakdown Voltage Test Leakage Leakage at Peak Pulse Clamping

Marking V

(BR)

(Volts)

(NOTE 1)

Current Stand-off Voltage at V

WMVWM,TJ

=150°C Surge Current I

PPM

Voltage at I

Device Code Min. Max. at I

(mA) V

(Volts) I

(µA) ID (µA)

(NOTE 2)

(Amps) Vc (Volts)

TPSMB6.8 KDP 6.12 7.48 10.0 5.50 500 1000 55.6 10.8 TPSMB6.8A KEP 6.45 7.14 10.0 5.80 500 1000 57.1 10.5 TPSMB7.5 KFP 6.75 8.25 10.0 6.05 250 500 51.3 11.7 TPSMB7.5A KGP 7.13 7.88 10.0 6.40 250 500 53.1 11.3 TPSMB8.2 KHP 7.38 9.02 10.0 6.63 100 200 48.0 12.5 TPSMB8.2A KKP 7.79 8.61 10.0 7.02 100 200 49.6 12.1 TPSMB9.1 KLP 8.19 10.0 1.0 7.37 25 50.0 43.5 13.8 TPSMB9.1A KMP 8.65 9.55 1.0 7.78 25 50.0 44.8 13.4 TPSMB10 KNP 9.00 11.0 1.0 8.10 5.0 20.0 40.0 15.0 TPSMB10A KPP 9.50 10.5 1.0 8.55 5.0 20.0 41.4 14.5 TPSMB11 KQP 9.90 12.1 1.0 8.92 2.0 5.0 37.0 16.2 TPSMB11A KRP 10.5 11.6 1.0 9.40 2.0 5.0 38.5 15.6 TPSMB12 KSP 10.8 13.2 1.0 9.72 2.0 5.0 34.7 17.3 TPSMB12A KTP 11.4 12.6 1.0 10.2 2.0 5.0 35.9 16.7 TPSMB13 KUP 11.7 14.3 1.0 10.5 2.0 5.0 31.6 19.0 TPSMB13A KVP 12.4 13.7 1.0 11.1 2.0 5.0 33.0 18.2 TPSMB15 KWP 13.5 16.5 1.0 12.1 2.0 5.0 27.3 22.0 TPSMB15A KXP 14.3 15.8 1.0 12.8 2.0 5.0 28.3 21.2 TPSMB16 KYP 14.4 17.6 1.0 12.9 2.0 5.0 25.5 23.5 TPSMB16A KZP 15.2 16.8 1.0 13.6 2.0 5.0 26.7 22.5 TPSMB18 LDP 16.2 19.8 1.0 14.5 2.0 5.0 22.6 26.5 TPSMB18A LEP 17.1 18.9 1.0 15.3 2.0 5.0 23.8 25.2 TPSMB20 LFP 18.0 22.0 1.0 16.2 2.0 5.0 20.6 29.1 TPSMB20A LGP 19.0 21.0 1.0 17.1 2.0 5.0 21.7 27.7 TPSMB22 LHP 19.8 24.2 1.0 17.8 2.0 5.0 18.8 31.9 TPSMB22A LKP 20.9 23.1 1.0 18.8 2.0 5.0 19.6 30.6 TPSMB24 LLP 21.6 26.4 1.0 19.4 2.0 5.0 17.3 34.7 TPSMB24A LMP 22.8 25.2 1.0 20.5 2.0 5.0 18.1 33.2 TPSMB27 LNP 24.3 29.7 1.0 21.8 2.0 5.0 15.3 39.1 TPSMB27A LPP 25.7 28.4 1.0 23.1 2.0 5.0 16.0 37.5 TPSMB30 LQP 27.0 33.0 1.0 24.3 2.0 5.0 13.8 43.5 TPSMB30A LRP 28.5 31.5 1.0 25.6 2.0 5.0 14.5 41.4 TPSMB33 LSP 29.7 36.3 1.0 26.8 2.0 5.0 12.6 47.7 TPSMB33A LTP 31.4 34.7 1.0 28.2 2.0 5.0 13.1 45.7 TPSMB36 LUP 32.4 39.6 1.0 29.1 2.0 5.0 11.5 52.0 TPSMB36A LVP 34.2 37.8 1.0 30.8 2.0 5.0 12.0 49.9 TPSMB39 LWP 35.1 42.9 1.0 31.6 2.0 5.0 10.6 56.4 TPSMB39A LXP 37.1 41.0 1.0 33.3 2.0 5.0 11.1 53.9 TPSMB43 LYP 38.7 47.3 1.0 34.8 2.0 5.0 9.7 61.9 TPSMB43A LZP 40.9 45.2 1.0 36.8 2.0 5.0 10.1 59.3

NOTES:

(1) V

(BR)

measured after ITapplied for 300µs, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35

+ 2 hidden pages