General Semiconductor P6KE10, P6KE110A, P6KE120, P6KE12A, P6KE13 Datasheet

...

P6KE6.8 THRU P6KE440CA

TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power- 600 Watts

FEATURES

♦ Plastic package has Underwriters Laboratory

Flammability Classification 94V-0

♦ Glass passivated junction ♦ 600W peak pulse power capability with a 10/1000µs

waveform, repetition rate (duty cycle): 0.01%

♦ Excellent clamping

capability

♦ Low incremental surge resistance ♦ Fast response time: typically less

than 1.0ps from 0 Volts to V

(BR)

for

uni-directional and 5.0ns for bi-directional types

♦ Typical IDless than 1µA above 10V ♦ High temperature soldering guaranteed:

265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension

MECHANICAL DATA

Case: JEDEC DO-204AC molded plastic body over

passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: For uni-directional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation

Mounting Position: Any Weight: 0.015 ounce, 0.4 gram

DEVICES FOR BIDIRECTIONAL APPLICATIONS

For bi-directional use C or CA Suffix for types P6KE6.8 thru types P6KE440 (e.g. P6KE6.8C, P6KE440CA).

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOL VALUE UNITS

Peak pulse power dissipation with a 10/1000µs waveform

(NOTE 1, FIG. 1)

PPM

Minimum 600 Watts

Peak pulse current with a 10/1000µs waveform

(NOTE 1)

PPM SEE TABLE 1

Amps

Steady state power dissipation at T

=75°C

lead lengths, 0.375" (9.5mm)

(NOTE 2)

M(AV)

5.0 Watts

Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) unidirectional only

(NOTE 3)

FSM

100.0 Amps

Maximum instantaneous forward voltage at 50.0A for unidirectional only

(NOTE 4)

3.5/5.0 Volts

Operating junction and storage temperature range TJ, T

STG

-55 to +175 °C

NOTES:

(1) Non-repetitive current pulse, per Fig. 3 and derated above T

=25°C per Fig. 2 (2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5 (3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum (4) V

=3.5 Volt max. for devices of V

(BR)

≤220V, and VF=5.0V for devices of V

(BR)

>220V

1/21/99

DO-204AC

Dimensions in inches

and

(millimeters)

1.0

(25.4)

MIN.

0.300 (7.6)

0.230 (5.8)

1.0

(25.4)

MIN.

0.034 (0.86)

0.028 (0.71) DIA.

0.140 (3.6)

0.104 (2.6) DIA.

ELECTRICAL CHARACTERISTICS at (T

=25°C unless otherwise noted) TABLE 1

Maximum

Breakdown Voltage Maximum Peak Pulse Maximum Maximum

(BR)

Reverse Current Clamping Temperature

Volts

(NOTE 1)

Test Stand-off Leakage I

PPM

Voltage at Coefficient

Current Voltage at V

PPM

of V

(BR)

Device Type MIN MAX

at I

ID (µA) (Amps) VC (Volts) (% / C)

(mA)

(Volts)

(NOTE3) (NOTE 2)

+P6KE6.8 6.12 7.48 10 5.50 1000 55.6 10.8 0.057 +P6KE6.8A 6.45 7.14 10 5.80 1000 57.1 10.5 0.057 +P6KE7.5 6.75 8.25 10 6.05 500 51.3 11.7 0.061 +P6KE7.5A 7.13 7.88 10 6.40 500 53.1 11.3 0.061 +P6KE8.2 7.38 9.02 10 6.63 200 48.0 12.5 0.065 +P6KE8.2A 7.79 8.61 10 7.02 200 49.6 12.1 0.065 +P6KE9.1 8.19 10.0 1.0 7.37 50 43.5 13.8 0.068 +P6KE9.1A 8.65 9.55 1.0 7.78 50 44.8 13.4 0.068 +P6KE10 9.00 11.0 1.0 8.10 10 40.0 15.0 0.073 +P6KE10A 9.50 10.5 1.0 8.55 10 41.4 14.5 0.073 +P6KE11 9.90 12.1 1.0 8.92 5.0 37.0 16.2 0.075 +P6KE11A 10.5 11.6 1.0 9.40 5.0 38.5 15.6 0.075 +P6KE12 10.8 13.2 1.0 9.72 5.0 34.7 17.3 0.078 +P6KE12A 11.4 12.6 1.0 10.2 5.0 35.9 16.7 0.078 +P6KE13 11.7 14.3 1.0 10.5 5.0 31.6 19.0 0.081 +P6KE13A 12.4 13.7 1.0 11.1 5.0 33.0 18.2 0.081 +P6KE15 13.5 16.5 1.0 12.1 5.0 27.3 22.0 0.084 +P6KE15A 14.3 15.8 1.0 12.8 5.0 28.3 21.2 0.084 +P6KE16 14.4 17.6 1.0 12.9 5.0 25.5 23.5 0.086 +P6KE16A 15.2 16.8 1.0 13.6 5.0 26.7 22.5 0.086 +P6KE18 16.2 19.8 1.0 14.5 5.0 22.6 26.5 0.088 +P6KE18A 17.1 18.9 1.0 15.3 5.0 23.8 25.2 0.088 +P6KE20 18.0 22.0 1.0 16.2 5.0 20.6 29.1 0.090 +P6KE20A 19.0 21.0 1.0 17.1 5.0 21.7 27.7 0.090 +P6KE22 19.8 24.2 1.0 17.8 5.0 18.8 31.9 0.092 +P6KE22A 20.9 23.1 1.0 18.8 5.0 19.6 30.6 0.092 +P6KE24 21.6 26.4 1.0 19.4 5.0 17.3 34.7 0.094 +P6KE24A 22.8 25.2 1.0 20.5 5.0 18.1 33.2 0.094 +P6KE27 24.3 29.7 1.0 21.8 5.0 15.3 39.1 0.096 +P6KE27A 25.7 28.4 1.0 23.1 5.0 16.0 37.5 0.096 +P6KE30 27.0 33.0 1.0 24.3 5.0 13.8 43.5 0.097 +P6KE30A 28.5 31.5 1.0 25.6 5.0 14.5 41.4 0.097 +P6KE33 29.7 36.3 1.0 26.8 5.0 12.6 47.7 0.098 +P6KE33A 31.4 34.7 1.0 28.2 5.0 13.1 45.7 0.098 +P6KE36 32.4 39.6 1.0 29.1 5.0 11.5 52.0 0.099 +P6KE36A 34.2 37.8 1.0 30.8 5.0 12.0 49.9 0.099 +P6KE39 35.1 42.9 1.0 31.6 5.0 10.6 56.4 0.100 +P6KE39A 37.1 41.0 1.0 33.3 5.0 11.1 53.9 0.100 +P6KE43 38.7 47.3 1.0 34.8 5.0 9.7 61.9 0.101 +P6KE43A 40.9 45.2 1.0 36.8 5.0 10.1 59.3 0.101 +P6KE47 42.3 51.7 1.0 38.1 5.0 8.8 67.8 0.101 +P6KE47A 44.7 49.4 1.0 40.2 5.0 9.3 64.8 0.101 P6KE51 45.9 56.1 1.0 41.3 5.0 8.2 73.5 0.102 P6KE51A 48.5 53.6 1.0 43.6 5.0 8.6 70.1 0.102 P6KE56 50.4 61.6 1.0 45.4 5.0 7.5 80.5 0.103 P6KE56A 53.2 58.8 1.0 47.8 5.0 7.8 77.0 0.103 P6KE62 55.8 68.2 1.0 50.2 5.0 6.7 89.0 0.104 P6KE62A 58.9 65.1 1.0 53.0 5.0 7.1 85.0 0.104 P6KE68 61.2 74.8 1.0 55.1 5.0 6.1 98.0 0.104 P6KE68A 64.6 71.4 1.0 58.1 5.0 6.5 92.0 0.104 P6KE75 67.5 82.5 1.0 60.7 5.0 5.6 108 0.105 P6KE75A 71.3 78.8 1.0 64.1 5.0 5.8 103 0.105 P6KE82 73.8 90.2 1.0 66.4 5.0 5.1 118 0.105 P6KE82A 77.9 86.1 1.0 70.1 5.0 5.3 113 0.105 P6KE91 81.9 100 1.0 73.7 5.0 4.6 131 0.106

+UL listed for Telecom application protection 497B, file number E136766 for both uni-directional and bi-directional devices

+ 2 hidden pages