General Semiconductor P6KA33, P6KA36A, P6KA13, P6KA16A, P6KA22 Datasheet
...
P6KA6.8 THRU P6KA43A
AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 43 Volts Peak Pulse Power - 600 Watts
FEATURES
♦ Designed for under the hood applications
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Exclusive patented PAR™ oxide passivated
chip construction
♦ 600W peak pulse power surge capability with a
10/1000µs waveform repetition rate (duty cycle): 0.01%
♦ Excellent clamping capability
♦ Low incremental surge resistance
♦ Fast response time: typically less
than 1.0ps from 0 Volts to V
(BR)
♦ For devices with V
(BR)
≥10V, IDare
typically less than1.0µA
♦ High temperature soldering guaranteed:
300°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic body over
passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes positive end (cathode)
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOL VALUE UNITS
Peak pulse power dissipation with a 10/1000µs
(NOTE 1, FIG. 1)
P
PPM
Minimum 600 Watts
Pulse pulse current with a 10/1000µs waveform
(NOTE 1, FIG. 3)
I
PPM SEE TABLE 1
Amps
Steady state power dissipation at T
L
=75°C
lead lengths 0.375" (9.5mm)
(NOTE 2)
P
M(AV)
5.0 Watts
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method)
(NOTE 3
)
I
FSM
70.0 Amps
Maximum instantaneous forward voltage at 50A
(NOTE 3)
V
F
3.5 Volts
Operating junction and storage temperature range T
J
, T
STG
-65 to +185 °C
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T
A
=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum
1/21/99
DO-204AC
Dimensions in inches and (millimeters)
Patent #’s 4,980,315
5,166,769
5,278,094
Available in uni-directional only
PATENTED*
*
1.0
(25.4)
MIN.
0.300 (7.6)
0.230 (5.8)
1.0
(25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
0.140 (3.6)
0.104 (2.6)
DIA.
ELECTRICAL CHARACTERISTICS RATINGS at (T
A
=25°C unless otherwise noted) TABLE 1
Maximum Maximum
Breakdown Voltage Maximum Reverse Peak Pulse Temperature
V
(BR)
Test Stand-off Reverse Leakage Current Maximum Coefficient
(Volts)
(NOTE 1)
Current Voltage Leakage at V
WM
I
PPM
Clamping of
at I
T
V
WM
at V
WM
TJ=150°C
(NOTE 2)
Voltage at l
PPM
V
(BR)
Device Type MIN MAX
(Amps) (Volts) I
D
(µA) ID (µA) (Amps) VC (Volts) (% / °C)
P6KA6.8 6.12 7.48 10 5.50 500 1000 55.6 10.8 0.057
P6KA6.8A 6.45 7.14 10 5.80 500 1000 57.1 10.5 0.057
P6KA7.5 6.75 8.25 10 6.05 250 500 51.3 11.7 0.061
P6KA7.5A 7.13 7.88 10 6.40 250 500 53.1 11.3 0.061
P6KA8.2 7.38 9.02 10 6.63 100 200 48.0 12.5 0.065
P6KA8.2A 7.79 8.61 10 7.02 100 200 49.6 12.1 0.065
P6KA9.1 8.19 10.0 1.0 7.37 25.0 100 43.5 13.8 0.068
P6KA9.1A 8.65 9.55 1.0 7.78 25.0 100 44.8 13.4 0.068
P6KA10 9.00 11.0 1.0 8.10 10.0 50 40.0 15.0 0.073
P6KA10A 9.50 10.5 1.0 8.55 10.0 50 41.4 14.5 0.073
P6KA11 9.90 12.1 1.0 8.92 5.0 20.0 37.0 16.2 0.075
P6KA11A 10.5 11.6 1.0 9.40 5.0 20.0 38.5 15.6 0.076
P6KA12 10.8 13.2 1.0 9.72 2.0 10.0 34.7 17.3 0.076
P6KA12A 11.4 12.6 1.0 10.2 2.0 10.0 35.9 16.7 0.078
P6KA13 11.7 14.3 1.0 10.5 2.0 10.0 31.6 19.0 0.081
P6KA13A 12.4 13.7 1.0 11.1 2.0 10.0 33.0 18.2 0.081
P6KA15 13.5 16.3 1.0 12.1 2.0 10.0 27.3 22.0 0.084
P6KA15A 14.3 15.8 1.0 12.8 2.0 10.0 28.3 21.2 0.084
P6KA16 14.4 17.6 1.0 12.9 2.0 10.0 25.5 23.5 0.086
P6KA16A 15.2 16.8 1.0 13.6 2.0 10.0 26.7 22.5 0.086
P6KA18 16.2 19.8 1.0 14.5 2.0 10.0 22.6 26.5 0.088
P6KA18A 17.1 18.9 1.0 15.3 2.0 10.0 23.8 25.2 0.088
Loading...