Garmin GPSMAP 495 Quick Reference

GPSMAP® 495 Quick Reference Guide

PAGE/MODE—press to cycle through the main pages in sequence

Antenna

256-Color TFT

with backlighting

display

Antenna collapses

for storage. Be

sure the antenna

is up (as shown)

to receive satellite

signals.

External power

connector under

weather cap

Backlit keypad for easy

nighttime operation

USB

connector

under

weather cap

DIRECT TO—press to start a Go To using airports, navaids,

Battery pack. Press tab down

to remove battery pack for
replacement, if necessary.

Slot for optional

data card

GPSMAP 495 Keys

IN/OUT—press to zoom in or zoom out on the Map Page.

and remove a submenu from the display. Press and hold to switch
between Aviation Mode, Marine Mode, and Automotive Mode.

QUIT—press to cycle through the main pages in reverse sequence,

revert to the previous value in a data entry field, or cancel a function.

ENTER/MARK—press to select a highlighted option, initiate an

entry, and then confirm. Press and hold to mark a waypoint.

MENU—press to view the Options Menu for the current page. Press

twice to open the Main Menu.

recently used waypoints, or user-created waypoints. Press and hold
to open additional information for the current destination (such as
communication frequency and runway data). While in Automotive
Mode, press and hold for more than one second to open the Next Turn
Page and announce the next turn.

NRST/FIND—press to show the nearest airports, navaids, points of

communication, and airspace boundaries in Aviation Mode. When
pressed multiple times in Aviation Mode, the Find Menu appears.

POWER—press and hold to turn the unit on or off. Press and release

to adjust the backlighting and external speaker volume.

ROCKER—press up, down, left, or right to select menu options, enter

data, or move the pointer on the Map Page.

Press the DIRECT TO
Then select an airport, navaid, recent point, or user-defined point.

In Automotive or Marine Mode, press the DIRECT TO
Navigation window.

Using the Direct To Key

D

key in Aviation Mode to display the Go To Page.

D key to open the

To Go To an airport or navaid:

1. Press the DIRECT TO
ROCKER to select the Aviation tab.

Airport

identifier

Facility

name

City

2. Select the identifier, facility name, or city field, and press ENTER.

3. Enter the identifier, facility name, or city.

4. Press ENTER when the waypoint is shown and highlighted.

5. With the on-screen Go To button highlighted, press ENTER. A course
is plotted from your present location to the selected destination.

D

key to open the Go To Page. Use the

Go To Page—Aviation tab

To Go To recently used waypoint or user-created waypoint:

1. Press the DIRECT TO D key to open the Go To Page.

2. Select the Recent or User tab.

3. Highlight a waypoint from the list, and press

4. With the on-screen Go To button highlighted, press ENTER. A course
is plotted from your present location to the selected destination.

ENTER

.

Press the NRST/FIND key in Aviation Mode to show the Nearest Pages.
Then select an airport, navaid, recent point, or user-defined point.

In Automotive or Marine Mode, press the
Menu.

Using the NRST/Find Key

NRST/FIND key to open the Find

To select an item as your destination from the Nearest Pages:

1. Press the NRST/FIND key.

2. To select a different category, use the ROCKER to select the tab

along the top of the page.

Nearest Page: Airport tab

3. Use the ROCKER to highlight a waypoint on the list, and press
ENTER. The corresponding waypoint information page appears.

For airports, use the

information pages and show the airport data.

4. Highlight Go To

QUIT to return to the Nearest Pages. You can also highlight any
of the on-screen buttons to perform that action, such as Delete or
Show Map.

ROCKER to select the tabs across the top of the

, and press ENTER to navigate to the point. Press

© Copyright 2008 Garmin Ltd. or its subsidiaries
190-00925-00 Rev. A Printed in Taiwan

Creating and Using a Flight Plan (Route)

Selecting an Approach

Marking a Waypoint

Finding a Land or Marine Item

To create and use a flight plan (route):

1. Press the MENU key twice to open the Main Menu.

2. Highlight Route from the vertical list of tabs.

3. Highlight the first available blank route slot, and press ENTER.

4. Press ENTER to find items to add to the route.

Identifier

Facility

Name

City

Main Menu

Route Tab

5. Select or enter the identifier, facility name, or city field, and press

ENTER.

6. Press ENTER when the point is shown.

7. With the on-screen OK button highlighted, press ENTER. The point

is added to the route.

8. When you are finished adding points to your route, press QUIT to
view the Routes tab again. Your new route is highlighted.

9. Press MENU, select Activate Route, and press ENTER to start
navigating your route.

Adding Points to the route.

To select and navigate an approach from the Active Route
Page:

1. Press PAGE until the Active Goto (or Active Route) Page appears.

2. Press MENU to open the options menu. Highlight Select Approach,
and press ENTER.

3. Use the ROCKER to select the approach from the window, and press

ENTER.

To select and navigate an approach for the destination
airport:

1. Press DIRECT TO

2. Press MENU to open the options menu. Highlight Select Approach,
and press ENTER.

3. Use the ROCKER to select the approach from the pop-up window,
and press ENTER.

Go To Page

Options Menu

4. A “Vectors?” window appears. Use the ROCKER to select Yes, and
press ENTER. The GPSMAP 495 removes the destination airport
from the Go To Page (not from your flight plan/route), and replaces it
with the approach waypoints.

D

to open the Go To Page.

Selecting an Approach

Go To Page

To mark your present location:

1. Press and hold the ENTER/MARK key until the New Waypoint Page

appears.

2. To accept the waypoint with the default name and symbol, highlight

OK, and press ENTER/MARK.

To change the information on the New Waypoint Page, highlight

the appropriate field, and press ENTER/MARK. After entering and
confirming your changes, highlight OK, and press ENTER/MARK.

New Waypoint Page

To create a new waypoint using the Map Page:

1. Press PAGE until the Map Page appears.

2. Move the pointer to the map location or feature.

3. Press and quickly release the ENTER key to capture the pointer’s

location. The New Map Waypoint Page appears.

If you have highlighted a map feature, an information page appears

after you press ENTER. Use the ROCKER to highlight Save, and
press ENTER to save the item as a waypoint.

4. To accept the waypoint with the default name and symbol, highlight

OK, and press ENTER.

To change any information on the New Map Waypoint Page,

highlight the appropriate field, and press ENTER. After entering and
confirming your changes, highlight OK, and press ENTER.

When in Automotive or Marine Mode, pressing NRST/FIND displays the
Find Menu, shown below. To show the Find Menu in Aviation Mode, press
the NRST/FIND key multiple times.

To find a

1. From any page, press NRST/FIND.

2. Highlight a category from the list, and press ENTER.

3. Highlight an item from the list, and press ENTER.

To activate a Go To from the Find Menu:

1. Select a waypoint or point of interest as previously described, and

2. With the Go To button highlighted, press ENTER to begin navigation.

waypoint or other item from your current location:

Find Menu Navaid Search Result

press ENTER. The Waypoint Review Page automatically appears.