Garmin 03393 Quick Start Manual

The color and number of lit status LED
indicators change as the collar
charges. All the status LED indicators
turn solid green when the device is
fully charged.

3

After all the status LED indicators turn
solid green, remove the USB cord from
the device.

NOTE: The device turns on
automatically when you remove it from
the charger.

Turning On the Dog Collar Device

The device remains on until you turn the
device off manually

(page 3)

TIP: The device does not issue corrections
for two minutes after any button press, or
after the device is removed from the
charger.

Hold the power key until all of the
status LED indicators turn green.

The device beeps, and an LED
indicates the active mode. An LED
turns blue when the smart mode is
active. An LED turns green when any
other mode is active. After two
seconds, a blue or green LED turns
red.

Turning Off the Device

•

On the dog collar device, hold the
power key until the status LED turns
solid red, and release the power key.

The device beeps.

Attaching the Dog Collar Device to a
Collar Strap

You can attach the dog collar device to a
collar strap that is a maximum of 25.4 mm
wide (1 in.) and 2.78 mm thick (0.11 in.).

1

With the buckle facing outward, insert
the end of the collar strap À through
the slot Á on the collar device.

2

Pull approximately two-thirds of the
collar strap through the slot  on the
opposite side of the device.

Quick Start Manual 3