FLORABEST FAHE 20-Li B2 Instruction Manual
IAN 300034
CORDLESS PRUNER FAHE 20-Li B2
CORDLESS PRUNER
Translation of the original instructions
ΕΠΑΝΑΦΟΡΤΙΖΟΜΕΝΟ
ΤΗΛΕΣΚΟΠΙΚΟ ΑΛΥΣΟΠΡΙΟΝΟ
Μετάφραση των αυθεντικών οδηγιών λειτουργίας
AKKU-HOCHENTASTER
Originalbetriebsanleitung
WARNING
Before use, read the
handbook and the
operating instructions.
Follow the safety
instructions.
GB / IE / NI/CY Translation of the original instructions Page 1
GR / CY Μετάφραση των αυθεντικών οδηγιών λειτουργίας Σελίδα 19
DE / AT / CH Originalbetriebsanleitung Seite 39
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τις δυο σελίδες με τις εικόνες και εξοικειωθείτε με όλες τις
λειτουργίες της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
A
2a
FAHE 20-Li B2
GB│IE│NI│CY
│
1 ■
Contents
Introduction ......................................................2
Intended use ................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical data .............................................................. 3
General power tool safety warnings .................................4
1. Work area safety .......................................................... 4
2. Electrical safety ........................................................... 5
3. Personal safety ............................................................ 5
4. Power tool use and care .................................................... 5
5. Use and handling of the cableless electrical power tool ............................ 6
6. Service .................................................................. 6
Appliance-specific safety instructions for cordless pruners ............................. 6
Precautions against kickback ................................................... 7
Further safety instructions ...................................................... 8
Safety guidelines for battery chargers ............................................ 8
Original accessories/auxiliary equipment ......................................... 9
Before initial use ..................................................9
Charging the battery pack (see fig. A) ............................................ 9
Attaching/disconnecting the battery pack to/from the device .......................... 9
Checking the battery charge level ............................................... 9
Fixing/attaching the shoulder strap .............................................10
Mounting the saw chain and blade ............................................. 10
Tightening and checking the saw chain ..........................................10
Lubricating the chain ........................................................ 10
Sharpening the saw chain ....................................................10
Initial use .......................................................11
Switching on and off ........................................................ 11
Checking the automatic oil system ..............................................11
Adjusting the telescopic handle ................................................ 11
Adjusting the cutting angle ....................................................11
Sawing techniques ..........................................................11
Working safely ............................................................. 12
Transport and storage ............................................12
Cleaning and maintenance ........................................13
Troubleshooting: Cordless pruner ...................................14
Maintenance intervals: Cordless pruner ..............................14
Spare part orders ...........................................................14
Disposal ........................................................15
Kompernass Handels GmbH warranty ..............................15
Service .........................................................16
Importer .......................................................16
Translation of the original Conformity Declaration .....................17
Ordering a replacement battery ....................................18
Telephone ordering ......................................................... 18
FAHE 20-Li B2
■ 2 │ GB
│IE│NI│
CY
CORDLESS PRUNER
FAHE 20-Li B2
Introduction
Congratulations on the purchase of your new appliance. You have selected a high quality product.
The operating instructions are part of this product.
They contain important information on safety,
usage and disposal. Before using the product,
familiarise yourself with all handling and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner(s).
Intended use
This appliance is intended for trimming branches
in trees. It is not designed for extensive sawing
work, felling trees or cutting of materials such as
masonry, plastics or foods. Use this product only as
described and for the areas of applications specified. The appliance is not meant for commercial
use. The appliance is designed for use by adults.
This appliance is not intended for use by anyone
(including children) with reduced physical, sensory
or mental capabilities or lack of experience and/or
knowledge. The use of the appliance in rain or in
humid environments is prohibited. Any other usage
of or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer shall assume no liability for damage attributable to misuse.
Features
Telescopic handle
Quick release for telescopic handle
2a
Mounting bracket for the assembly tool
Handle
Appliance shaft
Safety lock-out
ON/OFF switch
Rear handle
Battery pack
Battery charge level button
Battery display LED
Release button for battery pack
Carrying lug
Release button for cutting angle
Viewing window for the oil level
Stop
Blade
Saw chain
Sprocket cover
Chainring
Mounting screw
Oil filler cap
Blade guide
Guide rail
Chain sprocket
Oil dispenser
High-speed charger
Red charge control LED
Green charge control LED
Shoulder strap
Blade guard
Organic chain oil
Assembly tool
Package contents
1 cordless pruner FAHE 20-Li B2
1 high-speed battery charger FAHE 20-Li B2-2
1 battery pack FAHE 20-Li B2-1
1 shoulder strap
1 blade guard
1 Blade
1 saw chain
100 ml organic chain oil
1 assembly tool
1 operating instructions
FAHE 20-Li B2
GB│IE│NI│CY
│
3 ■
Technical data
Cordless pruner: FAHE 20-Li B2
Rated voltage: 20 V
(direct current)
Max. rotational speed: 2500 min
-1
No-load speed: max. 5 m/s
Weight
(without battery,
cutting tool and strap): approx. 2.6 kg
Oil tank volume: 65 cm
3
Cut length: approx. 200 mm
Blade: 8" Oregon 080NDEA318
Saw chain: Oregon 91P033X
Use only the following battery to operate the
cordless tool: FAHE 20-Li B2-1
Type: LITHIUM ION
Rated voltage: 20 V
(direct current)
Capacity: 3000 mAh / 60 Wh
Cells: 10
Use only the following high-speed battery
charger to charge the cordless tool:
FAHE 20-Li B2-2
INPUT:
Rated voltage: 230–240 V ~, 50Hz
(alternating current)
Power consumption: 85 W
Fuse (internal): 3.15 A
T3.15A
OUTPUT:
Rated voltage: 21.5 V
(direct current)
Charging current: 3.5 A
Charging time: approx. 60 min
Protection class: II /
(double shielded)
Noise and vibration data:
Measured values for noise determined in accordance with EN ISO 22868. The A-rated noise level
of the power tool is typically as follows:
Sound pressure level: L
pA
= 88 dB (A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 106 dB (A)
Uncertainty: K
WA
= 3 dB
Wear ear protection!
Vibration values (vector total of three directions)
determined in accordance with EN ISO 22867:
Vibration: < 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
WARNING!
■ Also reduce the risk due to vibrations, e.g.
the risk of Raynaud's phenomenon, by taking
frequent breaks and rubbing your hands
together!
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure specified and can be used to make equipment
comparisons. The specified vibration emission
value can also be used to make an initial
exposure estimate.
WARNING!
► The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. There is a risk of underestimation of the vibration load if the power tool is
used regularly in this manner. Try to keep the
vibration loads as low as possible. Measures to reduce the vibration load are, e.g.
wearing gloves and limiting the working time.
In this case all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
FAHE 20-Li B2
■ 4 │ GB
│IE│NI│
CY
Explanation of symbols on the appliance:
Read the operating instructions
and safety advice before initial
operation!
Wear protective gloves!
Wear safety shoes!
Wear ear protection!
Wear a hard hat!
Wear safety goggles!
Keep bystanders away from the
appliance!
Do not use chain saw one-handed!
Always use chain saw two-handed!
Beware of chain saw kickback
and avoid contact with bar tip!
Protect the appliance against
rain or moisture!
Risk of fatal electrical shock!
Keep at least 10 m away from
overhead power lines.
Caution! Falling objects.
Especially when cutting above
head height.
Beware of thrown objects!
Caution! Risk of injury due to
running blades.
Sound power level LWA data
in dB.
Turn the device off and remove
the battery pack before performing any maintenance work!!
15 min
OIL
A full tank will last for approx. 15
minutes of continuous operation.
Running direction of the chain!
Oil filler cap
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the safety instructions and
other instructions may result in electric shock,
fire and/or serious injury.
NOTE
► National regulations may restrict the use of
the appliance.
Save all safety instructions and other instructions for future reference.
The term "power tool" in the safety instructions
refers to your mains-operated (cable) power tools
or battery-operated (cableless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
FAHE 20-Li B2
GB│IE│NI│CY
│
5 ■
2. Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cable. Never use the cable
for carrying, pulling or unplugging the power
tool. Keep cable away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cables increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cable suitable for outdoor use.
Use of a cable suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are ill,
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear safety goggles. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off position before connecting to power
source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use
of dust collection systems can can reduce dustrelated hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
b) Do not use the power tool if the switch is
defective. Any power tool that cannot be
controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children. Do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
FAHE 20-Li B2
■ 6 │ GB
│IE│NI│
CY
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations other from those
intended could result in a hazardous situation.
5. Use and handling of the cableless
electrical power tool
a) Charge a rechargeable battery unit using
only the charger recommended by the manufacturer. Chargers are often designed for a
particular type of rechargeable battery. There
is a risk of fire if other types of rechargeable
battery are used.
b) Only the rechargeable battery units supplied
are to be used with the power tools. The use
of other rechargeable battery units may lead
to the danger of injury or fire.
c) When they are not being used, store re-
chargeable battery units away from paper
clips, coins, keys. nails, screws or other small
metal objects that could cause the contacts to
be bridged. Short-circuiting the contacts of a
rechargeable battery may result in burns or fire.
d) Fluid may leak out of rechargeable batteries
if they are misused. If this happens, avoid
contact with the fluid. If accidental contact occurs, rinse the affected area with water. Seek
additional medical help if any of the fluid
gets into your eyes. Escaping battery fluid may
cause skin irritation or burns.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the battery from heat, e.g.
also from continuous sunlight, fire,
water and humidity. There is a risk of
explosion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only original replacement
parts. This will ensure that the safety of the
power tool is maintained.
Appliance-specific safety instructions
for cordless pruners
■ Always wear a hard hat, hearing protection
and safety gloves. Also wear eye protection to
prevent splashes of oil or saw dust from falling
into your eyes. Wear a dust mask to protect
yourself from dust.
■ Never use the appliance while standing on a
ladder.
■ Do not lean too far forwards while using the
appliance. Ensure you are standing firmly and
keep your balance at all times. Use the supplied
carrying strap to spread the weight evenly on
the body.
■ Wear sturdy, non-slip boots.
■ Do not use the appliance in the rain.
■ Do not use the appliance near overhead power
lines. Maintain a minimum distance of 10 m to
overhead power lines.
■ Do not stand under the branches that you
want to cut off, to avoid injuries due to falling
branches. Be aware of branches that may spring
back, to avoid injuries. Work at an angle of
approximately 60°.
■ Be aware that the appliance can kick back.
■ Keep an eye not only on the branches being
cut, but also on falling material, to avoid tripping.
■ After 30 minutes' work, take a break of at least
one hour.
■ Always wear protective gloves.
■ Cover the guide rail and the chain during
transport during transport and storage using the
cover.
■ Do not use the appliance in a potentially explo-
sive environment containing flammable liquids,
gases or dusts. The sparks generated by the
machine could ignite the vapours or gases.
■ The power outlet used must be suitable for the
plug. To avoid electrical shocks, never try to
modify the plug.
FAHE 20-Li B2
GB│IE│NI│CY
│
7 ■
■ Never remove the plug from the power supply
by pulling on the power cable. Always pull the
power plug itself. Do not drag or carry the
appliance using the power cable. Keep power
cable away from heat, oil, sharp edges or
moving parts.
■ Remove the battery pack from the appliance
after completion of work or during cleaning
and maintenance.
■ Avoid unintentional starting of the appliance.
■ Appliances with defective switches must be re-
paired immediately to avoid damage or injuries.
■ Store the appliance outside of the reach of chil-
dren. Only those who are fully acquainted with
these operating instructions and the appliance
itself may operate the appliance.
■ Maintain power tools carefully. Check for mis-
alignment or binding of moving parts, breakage
of parts and any other condition that may affect
the power tool’s operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
■ Therefore, have the appliance checked by quali-
fied specialists. Use only the replacement parts
recommended by the manufacturer.
Precautions against kickback
CAUTION KICKBACK!
► Be aware of the danger of kickback when
working with the appliance. There is a risk
of personal injury.
You can avoid kickbacks by being careful
and using the correct sawing technique.
■ Contact with the tip of the rail can, in some
cases, lead to an unexpected rearwards
reaction resulting in the guide rail
flying
upwards towards the operator (see Fig. A).
Fig. A
■ Kickbacks can occur if the tip of the guide rail
touches an object or if the wood bends and the
saw chain gets caught in the cut (see Fig. B).
Fig. B
■ If the saw chain jams in the upper edge of
the guide rail , the rail can kick back violently
towards the operator.
■ Any such reaction can lead to you losing con-
trol over the saw and possibly injuring yourself.
Do not rely solely on the chainsaw's built-in
safety devices. As the user of a chainsaw, you
can take a number of measures to avoid accidents and injury. A kickback is caused by
incorrect use or misuse of the power tool. It can
be avoided by taking proper precautions as
given below:
■ Hold the saw firmly with both hands, with
your thumb and finger around the handles of
the chainsaw. Hold your body and arms in a
position in which you can withstand kickback
forces. If suitable measures are taken, the op-
erator can control the recoil forces. Never
let go of the chainsaw.
■ Avoid an abnormal posture. This will prevent
inadvertent contact with the tip of the rail and
allows a better control of the chainsaw in unexpected situations.
FAHE 20-Li B2
■ 8 │ GB
│IE│NI│
CY
■ Always use the replacement rails and saw
chains specified by the manufacturer. Incor-
rect replacement rails and saw chains can lead
to a tearing of the saw chain and/or kickback.
■ Follow the manufacturer's instructions for
sharpening and maintenance of the saw
chain. Setting the depth stop too low can
increase the risk of kickback.
■ Do not saw with the tip of the blade.
This can lead to kickback.
■ Ensure that there are no objects on the
ground that you can trip over.
Further safety instructions
CAUTION! RISK OF INJURY!
► To prevent injuries, never touch the appliance
above the handle
while it is running!
■ During operation, no other person or animal
may be within a radius of 15 metres. The operator is responsible for third parties within the
warking area.
■ Keep the appliance, the cutting mechanism and
the blade guard in good condition to prevent
injury.
■ Children should be supervised to ensure that
they do not play with the appliance.
■ Do not use the appliance until you have famil-
iarised yourself with its use.
■ Do not work with a damaged or incomplete ap-
pliance or an appliance that has been modified
without the consent of the manufacturer. Never
use the unit with defective protective equipment.
Do not use the appliance if it has a defective on/
off switch. Before use, check the security state of
the appliance, especially the blade and the saw
chain. If the appliance has been dropped, check
for significant damage or defects.
■ Never start the appliance before the blade,
saw chain and sprocket covers have been fitted
correctly.
■ When starting and operating the appliance, en-
sure that it does not come into contact with the
ground, stones, wire or other foreign material.
Switch the appliance off before you put it down.
■ The device is designed for two-handed opera-
tion. Never work with one hand.
■ Hold the appliance only by the insulated han-
dles as the saw chain could come into contact
with hidden power lines. Contact between the
saw chain and a live wire may make exposed
metal parts of the power tool live and could
give the operator an electric shock.
■ Make sure that the appliance is switched off
when relocating the appliance and that you
cannot accidentally touch the on/off switch.
Carry the appliance with the saw chain and
blade facing backwards. Fit the blade guard
during transportation.
■ Attach the bumper spike
firmly before every
cut and do not start until this has been done.
■ Be extremely careful when sawing small bushes
and branches. The thin branches and twigs can
catch in the saw and fly in your direction or
knock you off balance.
■ Do not cut any wood that is lying on the ground
and do not attempt to saw roots that are protruding from the soil. Avoid immersing the saw
chain in the soil at all costs, as this could blunt
the saw chain.
■ When sawing a branch under tension, be
aware of the possibility of the branch flying
back once the tension is suddenly removed.
There is a risk of personal injury.
■ Do not use force to free the appliance if the
cutting tools get caught or jammed in branches.
Switch the appliance off immediately and do
not switch it on until the blockage has been
removed. There is a risk of personal injury!
Safety guidelines for battery chargers
■ This appliance may be used by
children aged 8 years and above
and by persons with limited physical, sensory or mental capabilities
or lack of experience and knowledge, provided that they are under
supervision or have been told how
to use the appliance safely and are
aware of the potential risks.
FAHE 20-Li B2
GB│IE│NI│CY
│
9 ■
■ Children must not use the appliance
as a plaything. Cleaning and user
maintenance tasks may not be carried out by children unless they are
supervised.
This charger is suitable for
indoor use only.
■ If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly
qualifi ed persons in order to avoid
a hazard.
RESIDUAL RISKS!
■ Even if you operate this power tool properly,
there will still be residual risks. The following
risks can occur in the context of the design
and construction of this power tool:
a) Cuts
b) Hearing damage, if no suitable hearing
protection is worn.
c) Damage to health caused by handarm vibrations if the appliance is used for
extended periods or is not properly used and
maintained.
WARNING!
■ Do not operate the appliance with a dam-
aged cable, power cable or power plug. A
damaged power cable causes danger to life
by electric shock.
Original accessories/auxiliary
equipment
■ Use only the additional equipment and acces-
sories detailed in the operating instructions.
The use of tools and accessories other than
those recommended in the operating instructions could lead to an increased risk of personal
injury for you.
Before initial use
Charging the battery pack (see fig. A)
CAUTION!
► Always unplug the appliance before you re-
move the battery pack
from or connect the
battery pack to the high-speed charger .
■ Never charge the battery pack
when the
ambient temperature is below 10°C or above
40°C.
♦ Connect the battery pack
to the high-speed
charger.
♦ Insert the power plug into the mains power
socket. The red control LED will light up.
♦ The green control LED
indicates that the
charging process is complete and the battery
pack is ready for use.
CAUTION!
♦ If the red control LED
flashes, this means
that the battery pack has overheated and
cannot be charged.
♦ If the red and green control LEDs
flash simultaneously, this means that the
battery pack is defective.
♦ Fit the battery pack
back onto the appliance.
Attaching/disconnecting the battery
pack to/from the device
Attaching the battery pack:
♦ Allow the battery pack
to click onto the rear
handle
of the appliance.
Removing the battery pack:
♦ Press the release button
and remove the
battery pack
.
Checking the battery charge level
♦ Press the battery charge level button
to check the status of the battery. The status/
remaining charge will be shown on the battery
display LED
as follows:
♦ RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
FAHE 20-Li B2
■ 10 │ GB
│IE│NI│
CY
Fixing/attaching the shoulder strap
♦ Hook the shoulder strap into the carrying
lug .
♦ Adjust the length of the shoulder strap to
your size so that carrying lug is at hip height
when hooked in place.
♦ In addition, you can adjust the height of the
carrying lug on the appliance shaft by
loosening the screw.
Mounting the saw chain and blade
WARNING!
► Wear protective gloves! There is a danger
of injury from the sharp cutting teeth!
► The sprocket cover
together with the chain
tensioning ring and the fixing screw
are not pre-assembled on the appliance at
delivery.
► The turning of the blade
is not intended by
the manufacturer.
► The chain travel direction
on the blade
must be adhered to every assembly.
♦ Place the saw chain
in the blade groove.
Ensure that the saw chain is running in
the correct direction.
♦ Attach the blade
with the labelling facing
upwards and guide the saw chain
around
the chain sprocket
.
The guide rail must be above the blade
guide .
♦ Put the sprocket cover
on.
♦ Tighten the fixing screw
slightly.
♦ Now, tighten the saw chain
(see section
Tightening and checking the saw chain).
♦ Tighten the fixing screw
completely.
Tightening and checking the saw
chain
WARNING!
► Wear protective gloves! There is a danger of
injury from the sharp cutting teeth!
♦ Undo the fixing screw
.
♦ Turn the chain tensioning ring
in a clockwise
direction to increase the tension.
♦ The saw chain
must lie against the underside
of the blade.
Check whether the saw chain can be drawn
over the blade by hand
.
♦ Now tighten the fixing screw
completely.
NOTE
► A new saw chain
stretches and must be
tightened more regularly.
Lubricating the chain
♦ Remove the oil filler cap .
♦ Fill the oil tank with approx. 65ml of organic
chain oil
.
WARNING!
► Never work without chain lubrication!
If the saw chain
runs dry, the cutting
equipment may become irreparably damaged within a short time. Always check chain
lubrication and oil level in the tank before
starting work.
NOTE
► Use only saw chain oil. Preferably biodegrad-
able. Do not use waste oil, motor oil, etc.
► While working, check whether the automatic
chain lubrication is working correctly. Check
the chain lubricator before and during work.
Sharpening the saw chain
NOTE
► You will find detailed information on
sharpening in the sharpening set, e.g. from
Oregon.
► Alternatively, you can use an electrical saw
chain sharpening device and follow the
instructions of the manufacturer.
► If you have any doubts about implementing the
work, the saw chain
should be replaced.
FAHE 20-Li B2
GB│IE│NI│CY
│
11 ■
Initial use
NOTE
► Comply with regulations regarding noise
protection and local rules. Using the
appliance on certain days (e.g. on Sundays
and public holidays), during certain times
(midday period, night time) or in certain
locations (e.g. health resorts, clinics, etc.)
may be restricted or prohibited.
Switching on and off
Switching on:
♦ Press the safety lock-out and keep it pressed
and then press the on/off switch .
♦ After the starting process, the safety lock-out
can be released.
Switching off:
♦ Release the ON/OFF switch .
Checking the automatic oil system
Before starting work, check the window for the oil
level
and the automatic oil system.
♦ Switch the appliance on and hold it over a
lightly coloured floor surface. The appliance
must not touch the ground.
♦ If there is an oil trace, the appliance is operat-
ing correctly.
♦ If there is no oil trace, clean the oil dispenser
or have the appliance repaired by our Customer
Service.
♦ To clean, wipe the residues from the oil dispenser
using a brush or cloth.
Adjusting the telescopic handle
The telescopic handle can be adjusted continuously by means of the quick release .
♦ Activate the quick release
and adjust the
length by pushing or pulling as required.
♦ Close the quick release again, thereby fixing
the desired working length of the telescopic
handle .
♦ If the screw of the quick release has loo-
sened, tighten it again with a hex key.
Adjusting the cutting angle
NOTE
► The cutting angle can be adjusted in 3 stages.
♦ Remove the battery pack
from the appliance.
♦ Press the release button
.
♦ Adjust the angle of the motor unit to the required
position.
♦ Let go of the release button
and the motor
unit will click into place.
♦ Insert the battery pack
back into the appliance.
Sawing techniques
WARNING!
► Pay attention to falling clippings.
► Be aware of the danger of branches flying
back.
NOTE
►
Place the stop
on the branch. This will help
you work more safely and quietly.
► Now you can begin with the sawing.
Sawing off small branches
♦ Saw small branches (Ø 0–8 cm) from the top
down (see figure).
Sawing off larger branches
♦ When sawing larger branches (Ø 8–20 cm),
first make a relief cut
A
(see figure).
■ A relief cut also prevents peeling of the bark on
the main trunk.
♦ Saw from the top
B
to the bottom A.
FAHE 20-Li B2
■ 12 │ GB
│IE│NI│
CY
2
1
Saw in sections
Long or thick branches should be shortened before
making the final cut (see figure).
cb a
Working safely
■ Keep the appliance, the cutting mechanism
and the blade guard in good condition to
prevent injury.
■ If the appliance has been dropped, check for
significant damage or defects.
■ Maintain the specified angle 60°±10° to
ensure safe working (see figure).
■ Do not use the appliance while standing on a
ladder or with unsteady footing.
■ Do not be tempted into making a poorly
considered cut. You could endanger yourself
and others.
■ Children should be supervised to ensure that
they do not play with the appliance.
■ Change your working position regularly. Using
the appliance for a long time can lead to vibration-related circulation disorders of the hands.
You can extend the usage duration by means of
appropriate gloves or by taking regular breaks.
Note that any personal predisposition to poor
blood circulation, low external temperatures or
large prehensile forces can reduce the usage
period.
Transport and storage
■ Use the blade guard for transporting the
appliance.
■ Ensure that the appliance cannot switch on
during transport (see figure).
■ Always clean the appliance thoroughly before
storing.
■ Store the appliance in a dry place and out of
the reach of children.
■ Store the appliance horizontally or secured
against falling.
■ Empty the oil tank. Organic chain oil
can
become resinous.
■ For better retention of the mounting tool You
can use this in the mounting bracket 2a.
A
B
C A B
60°±10°
FAHE 20-Li B2
GB│IE│NI│CY
│
13 ■
Cleaning and maintenance
WARNING! RISK OF INJURY!
Always switch the appliance off and
remove the battery before carrying
out any work on the appliance.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow fluids to get into the device.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
climate is cool and dry.
■ The pole pruner must be cleaned of sawdust at
regular intervals.
■ A new saw chain
stretches and must be
tightened more regularly.
FAHE 20-Li B2
■ 14 │ GB
│IE│NI│
CY
Troubleshooting: Cordless pruner
Problem Possible cause Troubleshooting
Saw chain
runs with
difficulty, chain
comes off or has
extended
Chain tension insufficient Check chain tension
No progress
Saw chain
dry/overheating or is
sagging
Top up with oil or grind, replace or tighten
the saw chain
Maintenance intervals: Cordless pruner
The figures given here are based on normal operating conditions. In the event of more difficult conditions,
such as strong dust generation and longer daily working hours, the given intervals are to be reduced correspondingly.
Appliance part Action Before
starting
work
Weekly In the
event of
faults
In the
event of
damage
As required
Lubricating the
chain
check
X
Saw chain
check and note
sharpness
X
check chain
tension
X
sharpen
X
Guide rail
check (wear,
damage)
X
clean
XX
deburr
X
replace
XX
Chain sprocket
check
X
replace
X
Spare part orders
Replacement parts can be ordered directly from the service centre. Please provide the following details
when making an order: machine type and item number.
NOTE
► Replacement parts not listed (such as batteries, switches) can be ordered via our service hotline.
FAHE 20-Li B2
GB│IE│NI│CY
│
15 ■
Disposal
The packaging is made from environmen-
tally friendly material and can be
disposed of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Do not dispose of batteries in your
normal domestic waste!
Defective or worn-out rechargeable batteries must
be recycled according to Directive 2006/66/EC.
Take the battery pack and/or device to the existing
collection facilities.
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If this product has any faults,
you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the
warranty described below.
Warranty conditions
The validity period of the warranty starts from the
date of purchase. Please keep your original receipt
in a safe place. This document will be required as
proof of purchase.
If any material or production fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
at our discretion. This warranty service is dependent on you presenting the defective appliance and
the proof of purchase (receipt) and a short written
description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product
will either be repaired or replaced by us. The repair
or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for
defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must
be reported immediately after unpacking. Repairs
carried out after expiry of the warranty period shall
be subject to a fee.
Loading...