Series
Start Here
Please read these instructions before using the printer.
1
If anything is missing, contact Epson® as described on the back of this sheet.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
Unpack
2
1 Connect the power cable.
2 Press the power button.
Turn on the printer
Caution: Do not connect to your computer yet.
*411693900*
*411693900*
3
Note: Don’t load paper before installing the ink cartridges.
1 Lift up the printer cover.
2 Open the cartridge cover.
Install ink cartridges
3 Shake the ink cartridges gently 4 or 5 times, then unpack them.
4 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals from the cartridges.
5 Insert the cartridges in the holder for each color.
6 Press the cartridges down until they click.
7 Close the ink cartridge cover and press it down until it clicks.
8 Close the printer cover.
9 Press the ink button to charge the ink. Charging takes about
2.5 minutes.
Note: Your WorkForce 1100 Series ships with full cartridges and part of the ink
from the fi rst cartridges is used for priming the printer.
Caution: Don’t turn off the printer while the power light is flashing or you’ll
waste ink.
4
1 Open the paper support and pull up the extensions.
Load paper
Loading...