Eppendorf PCR-Cooler User Manual

pgp
Instructions for use
3881 900.202
PCR-Cooler
Copyright© 2008 Eppendorf AG, Hamburg. No part of this publication may be reproduced without the prior permission of the copyright owner.
Trademarks
eppendorf is a registered trademark of Eppendorf AG, Hamburg, Germany. Registered trademarks are not marked in all cases with ™ or
®
in this manual.
3881 900.202-02/082011
PCR-Cooler — Instructions for use

1 Product description

1 Product description

2 Intended use

2 Intended use
The PCR Cooler is intended exclusively for indoor use and to cool samples during PCR preparation. Use only Eppendorf accessories or accessories recommended by Eppendorf.
The PCR Cooler must only be operated by appropriately qualified and trained specialist personnel. Carefully read the operating manual before working with the PCR cooler and familiarize yourself with its use.

3Operation

3 Operation
NOTICE! Damage to the PCR-Cooler caused by centrifugation.
The PCR-Cooler is only designed to cool samples during PCR preparation. Centrifugation forces may result in damage to the PCR-Cooler.
NOTICE!
Do not centrifuge the PCR-Cooler. Use a refrigerated centrifuge to
centrifuge samples.
1 PCR-Cooler 2 Holder The PCR-Cooler is a cool pack which is used for
efficient cooling of all standard PCR tubes and
1
plates. The PCR-Cooler can be used with:
single 0.2 ml and 0.5 ml tubes
0.2 ml strips
96-well PCR plates.
2
NOTICE! Damage of the PCR-Cooler from sharp edges.
Sharp edged components can damage the film on the underside of the PCR-Cooler.
NOTICE!
Do not use sharp edged components on the PCR-Cooler.
1. Before use, place the PCR-Cooler in a freezer at –20°C for at least 2 hours. Position the PCR-Cooler so that its bottom side is facing upwards.
2. Allow the PCR-Cooler to stand on the lab bench for approx. 10 minutes.
3
PCR-Cooler — Instructions for use
3. Insert the tubes or the plate. The tubes or the plate will not freeze. By changing color from violet to pink or from dark blue to light blue, the PCR-Cooler shows when the upper temperature value of 7°C has been exceeded. It is also possible to read the temperature of single tubes
by the color of the single bore holes.
Abb. 1:Thermal behavior of a precooled PCR-Cooler and a sample inserted at room temperature
Temperatur [°C]
25
22°C
20
15
10
7°C
5
0
–5
–10
–15
–20
Fig. 1: Thermal behavior of a precooled PCR-Cooler and a sample inserted at room
4. The PCR-Cooler can be labeled individually using the cards supplied. These cards
temperature
are inserted into the slots on the sides of the PCR-Cooler.
eingebrachte Probe (Volumen 0,1 mL)
Kühlaggregat (PCR-Cooler)
60010–10 120
Zeit [min]
4
PCR-Cooler — Instructions for use

4 Maintenance

4 Maintenance

4.1 Cleaning

Clean the PCR-Cooler and holder immediately if sample fluid enters the bore holes or comes into contact with the surface.
1. Remove the PCR-Cooler from the holder.
2. Clean with a mild soap solution.
3. Rinse thoroughly with distilled water.

4.2 Disinfection/decontamination

WARNING! Health hazard from contaminated accessories.
1. Follow the instructions in the decontamination certificate. You can find it
WARNING!
Select a disinfection method complying with the statutory rules and regulations for
your area of application. Use e.g. acohol (ethanol, isopropanol) or alcohol-containing disinfectants.
as a PDF file on our homepage
decontamination).
2. Decontaminate all the parts you want to dispatch.
3. Include the fully completed decontamination certificate for returned goods in the package.

5 Ordering Information

5 Ordering Information

5.1 Accessories

(www.eppendorf.com/
Order No.
(International)
3881 000.015 3881 000.023 3881 000.031
Order No.
(North
America)
022510509 022510541 022510525
0030 124.332 951010006
0030 128.575 0030 128.648
951020303 951020401
Description
PCR-Cooler
Starter Set (1 x pink, 1 x blue) Pink Blue
PCR Tubes
0.2 mL, colorless, 1,000 pieces
twin.tec PCR Plate 96
Wells colorless semi-skirted, colorless, 25 pcs. skirted, colorless, 25 pcs.
5
Eppendorf AG · 22331 Hamburg · Germany · Tel: +49 40 53801-0 · Fax: +49 40 538 01-556 · E-mail: eppendorf@eppendorf.com
Tel: +1 516 334 7500 · Toll free phone: +1 800-645-3050 · Fax: +1 516 334 7506 · E-mail: info@eppendorf.com
Application Support Europe: Tel: +49 1803 666 789 (Preis je nach Tarif im Ausland; 9 ct/min aus dem dt. Festnetz; Mobilfunkhöchstpreis 42 ct/min)
Your local distributor: www.eppendorf.com/worldwide
Eppendorf North America, Inc. · 102 Motor Parkway · Hauppauge, N.Y. 11788-5178 · USA
North America: Tel: +1 800 645 3050 · E-mail: techserv@eppendorf.com
Asia Pacific: Tel: +60 3 8023 6869 · E-mail: support_asiapacific@eppendorf.com
support@eppendorf.com
Loading...