Dual DV725BH User Manual

0 (0)

DV725BH

INSTALLATION/OWNER’S MANUAL

DVD Multimedia Receiver with Bluetooth ® featuring a 7" Touch Screen Display

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

Copyright Notes

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under license.

SD Logo is a trademark of SD-3C, LLC.

Other trademarks and trade names are those of their respective owners.

DV725BH PREPARATION

Table of Contents

Page

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Information/Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparation/Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remote Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11

AM/FM Tuner Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14 CD/USB/SD Card Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-18 DVD Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22 DualMirror Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24 Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26 Auxiliary Inputs/Rear Camera Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 27 Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2

DV725BH PREPARATION

WARNING

Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

Several states prohibit the installation of monitors/DVD players if the screen is visible from the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in “Park” and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lockout feature could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

When operating this unit, keep the unit’s volume level low enough so that the vehicle’s occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

3

DV725BH OPERATION

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your DUAL DV725BH is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.

To prevent damage or injury:

Make sure to ground the unit securely to the vehicle chassis ground.

Do not remove the top or bottom covers of the unit.

Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.

Do not subject the unit to excessive shock.

When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.

To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

Use only the provided hardware and wire harness.

You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.

If you experience problems during installation, consult your nearest DUAL dealer.

If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-382-5476.

To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.

When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.

Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

4

DV725BH INSTALLATION

Preparation

Before You Start

Disconnect negative battery terminal. Consult a qualified technician for instructions.

Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.

Install mounting sleeve into opening, bending tabs to secure.

Connect wiring harness as shown on page 6. Consult a qualified technician if you are unsure.

Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).

Reconnect negative battery terminal, and test for correct operation.

Snap trim ring into place (if required).

Slide unit into mounting sleeve to secure.

Mounting sleeve opening dimensions 7-3/16” x 2-1/16” (183 mm x 53 mm)

SLIDE BRACKET

HOUSING

KEY PLATE

KEY PLATE

PLASTIC TRIM

5

DV725BH INSTALLATION

Wiring Diagram - Inputs/Outputs

 

 

 

RL OUTPUT

 

 

 

 

 

 

 

 

 

VIDEO OUTPUT

 

 

 

RR OUTPUT

 

 

 

 

 

 

 

 

 

VIDEO OUTPUT

 

 

 

FL OUTPUT

 

 

 

 

 

 

 

 

 

REAR CAMERA INPUT

 

 

 

FR OUTPUT

 

 

 

 

 

 

 

 

 

AUX INPUT L

 

 

SUBWOOFER

 

 

 

 

 

 

 

 

 

AUX INPUT R

 

 

SUBWOOFER

 

 

 

 

 

 

 

 

 

VIDEO INPUT

 

 

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB Input

Dual Mirror Input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Charging Only)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SWC - GND (BLACK)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SWC - 1 (BROWN)

USB

 

 

 

RED

 

 

 

 

 

 

 

SWC - 2 (BROWN/BLACK)

Extension Cable

ACC

 

 

 

 

 

 

 

 

ORANGE

REVERSE

(Included)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YELLOW

 

 

 

 

 

PINK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B+

 

 

 

 

 

 

 

 

 

 

 

(B-) PARKING BRAKE

 

 

 

GROUND

BLACK

 

ORANGE / BLACK

ILLUMINATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BLUE

 

 

BLUE / BLACK

 

 

 

 

POWER ANTENNA

 

 

 

 

 

 

 

REMOTE TURN - ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHITE

 

 

GREY

 

 

 

 

FRONT LEFT

 

 

 

 

 

 

 

 

 

 

 

FRONT RIGHT

 

 

 

CHANNEL SPEAKER

 

WHITE / BLACK

GREY / BLACK

CHANNEL SPEAKER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GREEN

 

VILOET

 

 

 

 

REAR LEFT

 

 

 

 

 

 

 

 

 

 

 

REAR RIGHT

 

 

 

CHANNEL SPEAKER

 

GREEN / BLACK

VIOLET / BLACK

CHANNEL SPEAKER

 

 

 

 

 

 

 

Note:When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 15 amp ATM mini style fuse located inside the in-line filter box.

Wiring Notes:

Subwoofer output

The Subwoofer preamp audio output (black jacket with green RCA) is active in all audio modes.

Rear camera input

A rear view camera (not included) can be used with the Camera input.

Connecting a device

DualMirror technology allows you to mirror the screen of select Android smartphones as well as iPhone, iPod and iPad devices.

6

Dual DV725BH User Manual

DV725BH OPERATION

 

Control Locations

 

2

1

15

 

13

3

 

12

4

 

 

5

 

6

11

10

9

8

7

 

 

 

 

1

Release

 

9

Volume Knob / Push Select

 

 

2

Eject

 

10

Mode

 

 

3

IR Sensor

 

11

Power

 

 

4

USB Port

 

12

Play / Pause / Band

 

 

5

Microphone

 

13

Tune / Track Up

 

 

6

Auxiliary Input

14

Answer Call

 

 

7

Mute / End Call

15

Open

 

 

8

Tune/Track Down

 

 

 

 

 

 

1

Power & Mode

16

Go to / * Key

 

1

17

 

2

Talk

16

Mute

2

18

3

Adjust Angle

18

End / Reject

4

3

19

20

4

Setup

19

Clock

6

5

21

22

5

Subtitle & Local/Distance

20

Select

 

7

 

23

 

 

6

Tune / Track Down

21

Tune / Track Up

 

8

24

9

25

7

Band

22

Channel Up

11

10

26

27

8

Title / PBC / AS/PS

23

OK

 

12

 

 

 

13

 

 

9

Back

24

Forward

 

14

28

 

10

Volume Up

25

Channel Down

16

15

29

30

11

Volume Down

26

Stop

 

 

 

 

12

Menu / Subwoofer

27

Play / Pause

 

 

 

 

13

Angle / Zoom

28

Traffic Announcement

 

 

 

 

14

Audio / Mono/Stereo

29

+10 / # Key

 

 

 

 

15

EQ / Loudness

30

Alternative Frequencies

7

DV725BH OPERATION

Remote Control Preparation

Remove battery insulation tape .

To insert or replace the battery, remove the battery holder.

Notes:

The remote control uses one 3 volt Lithium CR2025 battery. Remove the battery if the remote will not be used for a month or longer.

Remove and dispose of battery properly.

Do not store battery with metallic objects or materials.

Remove the battery from the battery holder.

Install the new battery.

Make sure to keep the (+) side up.

Insert the battery holder .

8

DV725BH OPERATION

General Operation

Installing the Faceplate Align the faceplate with the front of the unit, then snap in place beginning with the left side.

Power On/Off Momentarily press to turn the unit on or off.

Volume Rotate the volume knob to increase or decrease the volume level.

Mute Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume. Rotating the volume knob while the volume is muted will also cancel the mute function.

Mode Press MODE to step through all available input modes: Tuner, Disc (which includes DVD and CD playback), iPod, SD, USB, DualMirror, Bluetooth and auxiliary input. Modes of operation are indicated on the display and/or the monitor. Optional iPod device, USB flash drive and SD card must be connected/inserted to appear in the mode selection string.

Auxiliary Input Connect external audio/video devices to the 3.5mm auxiliary input on the front panel.

USB Port Connect a USB device to the USB port on the front panel to play MP3/ WMA files or view AVI, MP4 video files or JPG photos.

SD Card Insert an SD card into the SD slot (located behind the faceplate) to play MP3/WMA files or view view AVI, MP4 video files or JPG photos.

Opening the LCD Press OPEN to open or close the LCD screen.

Screen Angle Press TILT p or TILT q to adjust the screen angle up or down.

Main Menu When the monitor is open, press the house icon in the top left corner to access the Main Menu screen.

1

2

3

4

5

6

1.Put the monitor into standby mode.

2.Close the LCD screen.

3.Tilt screen up.

4.Tilt screen down.

5.Eject the disc.

6.Set up steering wheel controls (view Steering Wheel Controls insert included with the unit for details).

9

Loading...
+ 22 hidden pages