D-Link DVA-G3670B User Manual

Table of Content

Table of Content

Table of Contents

PRODUCT OVERVIEW ............................................................................4

PACKAGE CONTENTS ........................................................................4

SYSTEM REQUIREMENTS..................................................................4

INTRODUCTION...................................................................................5

FEATURES ...........................................................................................6

HARDWARE OVERVIEW .....................................................................7

CONNECTIONS ................................................................................ 7

LEDS .................................................................................................8

INSTALLATION.........................................................................................9

BEFORE YOU BEGIN...........................................................................9

INSTALLATION NOTES .....................................................................10

INFORMATION YOU WILL NEED FROM YOUR ADSL SERVICE

PROVIDER..........................................................................................12

INFORMATION YOU WILL NEED ABOUT DVA-G3670B .................. 14

WIRELESS INSTALLATION CONSIDERATIONS..............................16

DEVICE INSTALLATION ....................................................................17

POWER ON ROUTER ........................................................................17

NETWORK CONNECTIONS ..............................................................18

CONFIGURATION ..................................................................................20

WEB-BASED CONFIGURATION UTILITY .........................................20

SETUP ................................................................................................21

WIZARD ..........................................................................................21

INTERNET SETUP..........................................................................30

WIRELESS......................................................................................35

LOCAL NETWORK .........................................................................40

TIME................................................................................................43

ADVANCED ........................................................................................45

ADVANCED WIRELESS.................................................................45

PORT FORWARDING.....................................................................49

PORT TRIGGERING.......................................................................51

DMZ................................................................................................. 53

PARENTAL CONTROL....................................................................54

D-Link DVA-G3670B User Manual

FILTERING OPTION .......................................................................57

FIREWALL.......................................................................................61

DNS .................................................................................................62

DDNS ..............................................................................................63

NETWORK TOOL ...........................................................................64

ROUTING ........................................................................................68

SCHEDULES...................................................................................70

TR-069 CLIENT...............................................................................71

PRINT SERVER ..............................................................................72

VOICE .................................................................................................74

VOIP ACCOUNT..............................................................................74

PSTN CONNECTION ......................................................................75

LINE SETTINGS..............................................................................76

PREFIX RULES...............................................................................78

CALL REJECT SETTING ................................................................79

INCOMING CALL POLICY ..............................................................80

PEER TO PEER ..............................................................................81

TELEPHONY SETUP......................................................................83

MAINTENANCE ..................................................................................85

SYSTEM..........................................................................................85

FIRMWARE UPDATE......................................................................87

ACCESS CONTROL .......................................................................88

DIAGNOSTICS................................................................................91

SYSTEM LOG .................................................................................92

STATUS ...............................................................................................94

DEVICE STATUS.............................................................................94

WIRELESS CLIENTS......................................................................96

DHCP CLIENTS ..............................................................................97

LOG .................................................................................................98

STATISTICS ....................................................................................99

ROUTE INFO ................................................................................101

TROUBLESHOOTING ..........................................................................102

WIRELESS BASICS..............................................................................104

Table of Content

NETWORKING BASICS .......................................................................107

CHECK YOUR IP ADDRESS............................................................107

STATICALLY ASSIGN AN IP ADDRESS .........................................108

TECHNICAL SPECIFICATIONS ...........................................................109

CONTACTING TECHNICAL SUPPORT ...............................................110

D-Link DVA-G3670B User Manual

Section 1 - Product Overview

Product Overview

Package Contents

• DVA-G3670B Wireless ADSL Router

• 1 Detachable Antenna

• Power Adapter

• CD-ROM with Installation Wizard, User Manual, and Special Offers

• One twisted-pair telephone cable used for ADSL connection

• One straight-through Ethernet cable

• One Quick Installation Guide

Note: Using a power supply with a different voltage rating than the one included

with the DVA-G3670B will cause damage and void the warranty for this product.

System Requirements

• ADSL Internet service

• Computer with:

• 200MHz Processor

• 64MB Memory

• CD-ROM Drive

• Ethernet Adapter with TCP/IP Protocol Installed

• Windows XP/20004

• Internet Explorer v6 or later, FireFox v1.5

• D-Link Click'n Connect Utility

• Computer with Windows 2000/XP

D-Link DVA-G3670B User Manual

Section 1 - Product Overview

Introduction

HIGH-SPEED ADSL2/2+ INTERNET CONNECTION

Latest ADSL2/2+ standards provide Internet transmission of up to 24Mbps downstream, 1Mbps upstream.

HIGH-PERFORMANCE WIRELESS

Embedded 802.11g technology for high-speed wireless connection, complete compatibility with 802.11b wireless devices

TOTAL SECURITY & QoS

Firewall protection from Internet attacks, user access control, WPA/WPA2 wireless security and priority queues for smooth VoIP traffic/streaming multimedia

ULTIMATE INTERNET CONNECTION

The DVA-G3670B ADSL2+ router is a versatile, high-performance remote router for home and the small office. With integrated ADSL2/2+ supporting up to 24Mbps download speed, firewall protection, Quality of Service (QoS), 802.11g wireless LAN and 4 Ethernet switch ports, this router provides all the functions that a home or small office needs to establish a secure and high-speed remote link to the outside world.

ULTIMATE WIRELESS CONNECTION WITH MAXIMUM SECURITY

This router provides maximize wireless performance by connecting this router to computer interfaces and stay connected from virtually anywhere at home and in the office. The router can be used with 802.11b/g wireless networks to enable significantly improved reception. It supports WPA/WPA2 and WEP for flexible user access security and data encryption methods.

FIREWALL PROTECTION & QoS

Security features prevents unauthorized access to the home and office network, be it from the wireless devices or from the Internet. The router provides firewall security using Stateful Packet Inspection (SPI) and hacker attack logging for Denial of Service (DoS) attack protection. SPI inspects the contents of all incoming packet headers before deciding what packets are allowed to pass through. Router access control is provided with packet filtering based on port and source/destination MAC/IP addresses. For Quality of Service (QoS), the router supports multiple priority queues to enable a group of home or office users to experience the benefit of smooth network connection of inbound and outbound data without concern of traffic congestion. This QoS support allows users to enjoy high ADSL transmission for applications such as VoIP and streaming multimedia over the Internet.

*Maximum wireless signal rate derived from IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.

D-Link DVA-G3670B User Manual

Section 1 - Product Overview

Features

• Faster Wireless Networking - The DVA-G3670B provides up to 54Mbps* wireless connection with other 802.11g wireless clients. This

capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.

• Compatible with 802.11b and 802.1 1g Devices - The DVA-G3670B is still fully compatible with the IEEE 802.11b and g standards, so it can

connect with existing 802.11b and g PCI, USB and Cardbus adapters.

• DHCP Support - Dynamic Host Configuration Protocol automatically and dynamically assigns all LAN IP settings to each host on your

network. This eliminates the need to reconfigure every host whenever changes in network topology occur.

• Network Address Translation (NAT) - For small office environments, the DVA-G3670B allows multiple users on the LAN to access the

Internet concurrently through a single Internet account. This provides Internet access to everyone in the office for the price of a single user. NAT improves network security in effect by hiding the private network behind one global and visible IP address. NAT address mapping can also be used to link two IP domains via a LAN-to-LAN connection.

• Precise ATM Traffic Shaping - Traffic shaping is a method of controlling the flow rate of ATM data cells. This function helps to establish the

Quality of Service for ATM data transfer.

• High Performance - Very high rates of data transfer are possible with the Router. Up to 24Mbps downstream bit rate using the G.dmt

standard. (For ADSL2+)

• Full Network Management - The DVA-G3670B incorporates SNMP (Simple Network Management Protocol) support for web-based

management and text-based network management via Telnet connection.

• Easy Installation - The DVA-G3670B uses a web-based graphical user interface program for convenient management access and easy set

up. Any common web browser software can be used to manage the Router.

D-Link DVA-G3670B User Manual

Section 1 - Product Overview

Antenna

For wireless operation, mount the antenna on the threaded antenna post.

Hardware Overview

Connections

VoIP ports

Use VoIP ports to connect to your telephone line(RJ-11)

USB ports

Use USB port to connect to your printer.

Power insert

Use the adapter shipped with the Router to connect to power source

Power button

Push in to power-on the

ADSL port

Use the ADSL cable to connect to the your telephone line (RJ-11 port)

D-Link DVA-G3670B User Manual

PSTN ports

Use PSTN ports to connect to your PSTN phone cable

Ethernet ports

Use the Ethernet ports to connect the Router to your Ethernet LAN or Ethernet devices

Reset button

Pressing this button restores the router to its original factory default settings

Router. Push again to power-off the Router

Section 1 - Product Overview

Hardware Overview

Power

Steady green light indicates the unit is powered on. When the device is powered off this remains dark.

LAN

A solid green light indicates a valid link on startup. These lights blink when there is activity currently passing through the Ethernet port.

LEDs

USB

Steady green light indicates a valid USB connection. This will light after the USB negotiation process has been settled. A blinking green light indicates transmission on USB port

WLAN

Steady green light indicates a wireless connection. A blinking green light indicates activity on the WLAN interface

VoIP

A solid green light indicates SIP successful registration. These lights blink when call is ringing or connected. Dark if SIP registration is failure

PSTN

A solid green light indicates a valid PSTN connection. These lights blink when call is ringing or connected.

Internet

Steady green light indicates a successful Internet connection. Steady red light indicates failed Internet connection. Dark if no WAN protocol is configured. interface.

DSL

Steady green light indicates a valid ADSL connection. This will light after the ADSL negotiation process has been settled. A blinking green light indicates activity on the WAN (ADSL) interface.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Installation

This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage.

Before you Begin

Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the necessary information and equipment on hand before beginning the installation.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Installation Notes

In order to establish a connection to the Internet it will be necessary to provide information to the Router that will be stored in its memory. For some users, only their account information (Username and Password) is required. For others, various parameters that control and define the Internet connection will be required. You can print out the two pages below and use the tables to list this information. This way you have a hard copy of all the information needed to setup the Router. If it is necessary to reconfigure the device, all the necessary information can be easily accessed. Be sure to keep this information safe and private.

Low Pass Filters

Since ADSL and telephone services share the same copper wiring to carry their respective signals, a filtering mechanism may be necessary to avoid mutual interference. A low pass filter device can be installed for each telephone that shares the line with the ADSL line. These filters are easy to install passive devices that connect to the ADSL device and/or telephone using standard telephone cable. Ask your service provider for more information about the use of low pass filters with your installation.

Operating Systems

The DVA-G3670B uses an HTML-based web interface for setup and management. The web configuration manager may be accessed using any operating system capable of running web browser software, including Windows 98 SE, Windows ME, Windows 2000, and Windows XP.

Web Browser

Any common web browser can be used to configure the Router using the web configuration management software. The program is designed to work best with more recently released browsers such as Opera, Microsoft Internet Explorer® version 6.0, Netscape Navigator® version 6.2.3, or later versions. The web browser must have JavaScript enabled. JavaScript is enabled by default on many browsers. Make sure JavaScript has not been disabled by other software (such as virus protection or web user security packages) that may be running on your computer.

Ethernet Port (NIC Adapter)

Any computer that uses the Router must be able to connect to it through the Ethernet port on the Router. This connection is an Ethernet connection and therefore requires that your computer be equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet port already installed. Likewise, most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment. If your computer does not have an Ethernet port, you must install an Ethernet NIC adapter before you can use the Router. If you must install an adapter, follow the installation instructions that come with the Ethernet NIC adapter.

D-Link DVA-G3670B User Manual

Section 2 - Installation

802.11 Wireless LAN Configuration

All the 802.11 wireless LAN settings may be configured on a single page using the web-based manager. For basic wireless communication you need to decide what channel to use and what SSID to assign. These two settings must be the same for any wireless workstations or other wireless access point that communicate with the DVA-G3670B through the wireless interface. Security for wireless communication can be accomplished in a number of ways. The DVA-G3670B supports WPA (Wi-Fi Protected Access), WPA2, and mixed WPA/WPA2. Wireless access can also be controlled by selecting MAC addresses that are allowed to associate with the device. Please read the section on Wireless Configuration.

Additional Software

It may be necessary to install software on your computer that enables the computer to access the Internet. Additional software must be installed if you are using the device a simple bridge. For a bridged connection, the information needed to make and maintain the Internet connection is stored on another computer or gateway device, not in the Router itself. If your ADSL service is delivered through a PPPoE or PPPoA connection, the information needed to establish and maintain the Internet connection can be stored in the Router. In this case, it is not necessary to install software on your computer. It may however be necessary to change some settings in the device, including account information used to identify and verify the connection. All connections to the Internet require a unique global IP address. For bridged connections, the global IP settings must reside in a TCP/IP enabled device on the LAN side of the bridge, such as a PC, a server, a gateway device such as a router or similar firewall hardware. The IP address can be assigned in a number of ways. Your network service provider will give you instructions about any additional connection software or NIC configuration that may be required.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Information you will need from your ADSL service

provider

Username

This is the Username used to log on to your ADSL service provider’s network. It is commonly in the form  user@isp.co.uk. Your ADSL service provider uses this to identify your account.

Password

This is the Password used, in conjunction with the Username above, to log on to your ADSL service provider’s network. This is used to verify the identity of your account.

WAN Setting / Connection Type

These settings describe the method your ADSL service provider uses to transport data between the Internet and your computer. Most users will use the default settings. You may need to specify one of the following WAN Setting and Connection Type configurations (Connection Type settings listed in parenthesis):

• PPPoE/PPoA (PPPoE LLC, PPPoA LLC or PPPoA VC-Mux)

• Bridge Mode (1483 Bridged IP LLC or 1483 Bridged IP VC Mux)

• IPoA/MER (Static IP Address) (Bridged IP LLC, 1483 Bridged IP VC Mux, 1483 Routed IP LLC, 1483 Routed IP VC-Mux or IPoA)

• MER (Dynamic IP Address) (1483 Bridged IP LLC or 1483 Bridged IP VC-Mux)

Modulation Type

ADSL uses various standardized modulation techniques to transmit data over the allotted signal frequencies. Some users may need to change the type of modulation used for their service. The default DSL modulation (ADSL2+ Multi-Mode) used for the Router automatically detects all types of ADSL, ADSL2, and ADSL2+ modulation. However, if you are instructed to specify the modulation type used for the Router, you may choose among the numerous options available on the Modulation Type drop-down menu on the ADSL Configuration window (Advanced > ADSL)

Security Protocol

This is the method your ADSL service provider will use to verify your Username and Password when you log on to their network. Your Router supports the PAP and CHAP protocols.

D-Link DVA-G3670B User Manual

Section 2 - Installation

VPI

Most users will not be required to change this setting. The Virtual Path Identifier (VPI) is used in conjunction with the Virtual Channel Identifier (VCI) to identify the data path between your ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface.

VCI

Most users will not be required to change this setting. The Virtual Channel Identifier (VCI) used in conjunction with the VPI to identify the data path between your ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Information you will need about DVA-G3670B

Username

This is the Username needed access the Router’s management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is “admin.” The user cannot change this.

Password

This is the Password you will be prompted to enter when you access the Router’s management interface. The default Password is “admin.” The user may change this.

LAN IP addresses for the DVA-G3670B

This is the IP address you will enter into the Address field of your web browser to access the Router’s configuration graphical user interface (GUI) using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will be the base IP address used for DHCP service on the LAN when DHCP is enabled.

LAN Subnet Mask for the DVA-G3670B

This is the subnet mask used by the DVA-G3670B, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Information you will need about your LAN or computer:

Ethernet NIC

If your computer has an Ethernet NIC, you can connect the DVA-G3670B to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DVA-G3670B to connect to other computer or Ethernet devices.

DHCP Client status

Your DVA-G3670B ADSL Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask, and a default gateway address to computers on your LAN. The default range of IP addresses the DVA-G3670B will assign are from 192.168.1.2 to

192.168.1.254. Your computer (or computers) needs to be configured to Obtain an IP address automatically (that is, they need to be configured as DHCP clients.)

It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DVA-G3670B Wireless ADSL Router.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Wireless Installation Considerations

DVA-G3670B lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your

adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1

meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points,

wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.

5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless

connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Device Installation

The DVA-G3670B Wireless ADSL Router maintains three separate interfaces, an Ethernet LAN, a wireless LAN and an ADSL Internet (WAN) connection. Carefully consider the Router’s location suitable for connectivity for your Ethernet and wireless devices. You must have a functioning broadband connection via a bridge device such as a Cable or ADSL modem in order to use the Router’s WAN function.

Place the Router in a location where it can be connected to the various devices as well as to a power source. The Router should not be located where it will be exposed to moisture, direct sunlight or excessive heat. Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard. As with any electrical appliance, observe common sense safety procedures. The Router can be placed on a shelf, desktop, or other stable platform. If possible, you should be able to see the LED indicators on the front if you need to view them for troubleshooting.

Power on Router

The Router must be used with the power adapter included with the device.

1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby

power source.

2. Push down the Power button, and you should see the Power LED indicator light up and remain lit.

3. If the Ethernet port is connected to a working device, check the Ethernet Link/Act LED indicators to make sure the connection is valid. The

Router will attempt to establish the ADSL connection, if the ADSL line is connected and the Router is properly configured this should light up after several seconds. If this is the first time installing the device, some settings may need to be changed before the Router can establish a connection.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Factory Reset Button

The Router may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following sequence:

1. Press and hold the reset button while the device is powered off.

2. Turn on the power.

3. Wait for 10~15 seconds and then release the reset button.

Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device settings

will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the default management Username is “admin”

and the default Password is “admin.”

Network Connections

Connect ADSL Line

Use the ADSL cable included with the Router to connect it to a telephone wall socket or receptacle. Plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end into the RJ-11 wall socket. If you are using a low pass filter device, follow the instructions included with the device or given to you by your service provider. The ADSL connection represents the WAN interface, the connection to the Internet. It is the physical link to the service provider’s network backbone and ultimately to the Internet.

Connect Router to Ethernet

The Router may be connected to a single computer or Ethernet device through the 10BASE-TX Ethernet port on the rear panel. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10/100 Mbps only. When connecting the Router to any Ethernet device that is capable of operating at speeds higher than 10Mbps, be sure that the device has auto-negotiation (NWay) enabled for the connecting port. Use standard twisted-pair cable with RJ-45 connectors. The RJ-45 port on the Router is a crossed port (MDI-X). Follow standard Ethernet guidelines when deciding what type of cable to use to make this connection. When connecting the Router directly to a PC or server use a normal straight-through cable. You should use a crossed cable when connecting the Router to a normal (MDI-X) port on a switch or hub. Use a normal straight-through cable when connecting it to an uplink (MDI-II) port on a hub or switch. The rules governing Ethernet cable lengths apply to the LAN to Router connection. Be sure that the cable connecting the LAN to the Router does not exceed 100 meters.

D-Link DVA-G3670B User Manual

Section 2 - Installation

Hub or Switch to Router Connection

Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in this diagram. If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other

MDI-X ports (1x, 2x, etc.) with a crossed cable.

Computer to Router Connection

You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using the Ethernet cable provided as shown in this diagram.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.

Web-based Configuration Utility

Connect to the Router

To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the Router. The next section describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client.

To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.1.1).

Type “admin” for the User Name and “admin” in the Password field. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

SETUP

This chapter is concerned with using your computer to configure the WAN connection. The following chapter describes the various windows used to

configure and monitor the Router including how to change IP settings and DHCP server setup.

WIZARD

ADSL SETUP Click on the Setup Wizard button to launch the Setup Wizard.

WELCOME TO D-LINK SETUP WIZARD

There are six steps to configuring your router. Click on the Next to

continue.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

STEP 1: CHANGE YOUR DVA-G3670B PASSWORD

The default password is "admin", in order to secure your network, please modify the password. Note: Confirm Password must be same as "New

Password". Of course, you can click on the Skip to ignore the step.

STEP 2: TIME

Check the Enable NTP Server.

Select specific time server to use from the NTP Server Used drop-down

menu.

Select your operating time zone from the Time Zone drop-down menu.

Check the Enable Daylight Saving if needed and then select the proper

Daylight Saving Offset drop-down menu. Configure the Daylight Saving Dates from start date to end.

Click on the Save Settings button to apply your settings.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

STEP 3: SELECT INTERNET CONNECTION TYPE

Please select your Country and ISP, Protocol, Connection Type, the

VPI and VCI information Will display Automatically. Of course, you can modify the information.

If, you can not find the country and ISP in the list below; you can select

"Others", and then input the "VPI" and "VCI” and Connection Type. The Auto PVC Scan feature will not work in all cases so please enter the

VPI/VCI numbers if provided by the ISP.

Click on the Next button to go to the next Setup Wizard window.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

STEP 3: Setup Wizard - For PPPoE/PPPoA connection

Type in the Username and Password (and PPPoE Service Name, if

required by your ISP).

Click on the Next button to go to the next Setup Wizard window.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

STEP 3: Setup Wizard Using the Setup Wizard - For Dynamic IP Address connection

Please enter the appropriate information below as provided by your ISP.

The Auto PVC Scan feature will not work in all cases so please enter the VPI/VCI numbers if provided by the ISP.

Maybe, you have to input your PC MAC address if ISP requires, and you

can click on the button to copy it.

Click on the Next button to go to the next Setup Wizard window.

STEP 3: Setup Wizard - For Static IP Address connection

Please enter the appropriate information below as provided by your ISP.

The Auto PVC Scan feature will not work in all cases so please enter the VPI/VCI numbers if provided by the ISP.

Click on the Next button to go to the next Setup Wizard window.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

Using the Setup Wizard - For Static IP Address connection

Please enter the appropriate information below as provided by your ISP.

The Auto PVC Scan feature will not work in all cases so please enter the VPI/VCI numbers if provided by the ISP.

Please input the correct IP address, Subnet Mask, Default Gateway and DNS information. Note: Should you select to leave default Gateway

and DNS information blank, they should be automatically generated.

Click on the Next button to go to the next Setup Wizard window.

Using the Setup Wizard - For Bridge Mode connections

Please enter the appropriate information below as provided by your ISP.

The Auto PVC Scan feature will not work in all cases so please enter the VPI/VCI numbers if provided by the ISP.

Click Next to go to the next Setup Wizard window. Skip to Page 26: Using the Setup Wizard - For WAN Connection

Settings

Using the Setup Wizard - For Static IP Address connection

Please enter the appropriate information below as provided by your ISP.

The Auto PVC Scan feature will not work in all cases so please enter the VPI/VCI numbers if provided by the ISP.

Please input the correct IP address, Subnet Mask, Default Gateway and DNS information. Note: Should you select to leave default Gateway

and DNS information blank, they should be automatically generated.

Click on the Next button to go to the next Setup Wizard window.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

STEP 4: Using the Setup Wizard - For Wireless LAN Settings

Click the Enable Wireless box to allow the router to operate in the

wireless environment.

The SSID identifies members of the Service Set. Accept the default name

or change it to something else. If the default SSID is changed, all other devices on the wireless network must use the same SSID.

Set security Mode, select this option if you wireless adapters support

Click Next to go to the next window and complete the Setup Wizard.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

STEP 5: Setup Wizard - For LAN Settings

You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will change automatically if you change the IP address of the Router.

Enter the desired IP address and Subnet Mask.

Enter the Start and Stop IP Address for the DHCP Server, or disable DHCP Server.

Click Next to go to the next Setup Wizard window.

STEP 6: RESTART

Click Back to review or modify settings. Click on Restart to apply current

settings and reboot the DSL-2740B router. If your Internet connection

does not work after the router restarts, you can try the Setup Wizard

again with alternative settings or use Manual Setup instead provided you have your Internet connection details as provided to you by your ISP.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

DSL ROUTER REBOOT Please ensure you do not turn the Router off while it is rebooting.

After the Router has successfully rebooted, you can again configure the Router as desired. You can also test the WAN connection by accessing the Internet with your browser.

Close the DSL Router Configuration window and wait for 1 minute before reopening your web browser. If necessary, please reconfigure your computer’s IP address to match your new configuration.

D-Link DVA-G3670B User Manual

Section 3 - Configuration

INTERNET SETUP

To access the INTERNET SETUP (WAN) settings window, click on the INTERNET Setup button in the SETUP directory and select the Manual Setup to configure the MANUAL ADSL interface in this page: INTERNET SETUP Check the Manual Setup item and configure the below messages as in WIZARD.

Click on the Add button to set your settings.

Service Category

The ATM settings allow the user to adjust ATM Quality of Service (QoS) or traffic parameters to suit specific traffic requirements. For applications or circumstances where packet loss or packet delay is a concern, ATM QoS can be adjusted to minimize problems. For most accounts, it will not be necessary to change these settings. Altering QoS settings can adversely affect performance of some commonly used Internet applications.

If you plan to change QoS or traffic parameters, contact your ISP or network services provider for information on what types of adjustment are available or possible for your account. Your ISP may not support the class of service you want to use.

To adjust ATM QoS parameters, select one of the Service Categories listed here and type in the PCR value in the entry field below. For the VBR service category, an additional parameter (SCR) must also be

defined.

D-Link DVA-G3670B User Manual

+ 80 hidden pages