How it Works
D-Link
Loading...
DNS-320
User Guide
111 pgs10.77 Mb0
User Manual [fr]
112 pgs11.18 Mb0
User Manual
99 pgs5.11 Mb2
User Manual [fr]
263 pgs11.14 Mb0
DATASHEET [de]
2 pgs255.03 Kb0
User Manual [ru]
5 pgs1.29 Mb0
BROCHURE
2 pgs917.92 Kb0
Table of contents
Loading...

D-Link DNS-320 User Guide

USER MANUAL
ShareCenter™ Pulse DNS-320
VERSION 2.0
Table of Contents
Table of Contents
Product Overview .............................................................. 1
Front Panel ..............................................................................4
Rear Panel (Connections) ................................................... 5
Getting Started ..................................................................6
Installation .........................................................................7
Setup Wizard ...................................................................... 7
Install the Hard Drives ......................................................... 8
Power and Device Selection ...........................................10
Admin password .................................................................11
Network Setup .....................................................................12
Dynamic DNS .......................................................................13
DDNS Account and System Time ..................................14
E-mail Settings and Volume Information ...................15
RAID Conguration and Drive Mapping ....................16
Conguration Summary and Drive Formatting .......17
Format Complete ................................................................18
Conguration ...................................................................22
Setup Wizard (Web UI) ......................................................25
Hard Drive Conguration .................................................29
Hard Drive Conguration Wizard ..................................30
S.M.A.R.T Test ........................................................................34
Scan Disk ................................................................................36
Users / Groups ......................................................................37
Adding New Users Wizard ...............................................38
Adding New Groups Wizard ............................................42
Quotas ....................................................................................46
Network Shares ...................................................................47
Adding New Network Shares Wizard ...........................48
Adding New ISO Mount Shares Wizard.......................54
Admin Password .................................................................58
LAN Setup ..............................................................................59
Dynamic DNS .......................................................................61
FTP Server ..............................................................................62
UPnP AV Server ....................................................................63
iD-Link ShareCenter Pulse DNS-320 User Manual
Table of Contents
iTunes Server ........................................................................64
AFP Service ...........................................................................65
NFS Service ...........................................................................66
Language ...............................................................................67
Time and Date ......................................................................68
Device .....................................................................................69
System Settings ...................................................................70
Power Management ..........................................................72
Notications .........................................................................74
Logs .........................................................................................78
Firmware Upgrade ..............................................................79
System Info ...........................................................................80
Hard Drive Info .....................................................................81
FTP/HTTP Downloads .......................................................82
Knowledge Base ..............................................................98
Mapping the Recycle Bin .............................................. 102
Remote Backups .................................................................84
Local Backups .......................................................................89
Local Backups - Time Machine .......................................90
P2P Downloads - Settings ...............................................91
P2P Downloads - Downloads .........................................92
Web File Server ....................................................................93
AjaXplorer ..............................................................................94
My Favorites..................................................................................95
Re-arranging the My Favorites View ............................95
Add an Icon to My Favorites ...........................................96
Remove an Icon from My Favorites ..............................97
iiD-Link ShareCenter Pulse DNS-320 User Manual
Section 1 - Product Overview

Product Overview

Introduction

The D-Link ShareCenter Pulse DNS-320 2-Bay Network Storage, when used with internal SATA drives, enables you to share documents, les, and digital media such as music, photos, and video with everyone on the home or oce network. Remotely accessing les through the Internet is also possible with the built-in FTP server, Web File server and WebDAV protocol. Whether you are allowing access locally or over the Internet, keep data safe by only giving rights to specic users or groups. When conguring the ShareCenter Pulse, you can create users and groups and assign them to folders with either read or read/ write permissions. This is ideal for an oce environment with employee-specic sensitive data or for the home where you can ensure your children will only have access to age appropriate material. The ShareCenter Pulse will be available to any computer (PC, MAC, or Linux-based) on your network, without the need to install any software on the computer.
Back up your music, photo, and video collections to the ShareCenter Pulse for safekeeping. Then, enjoy the benets of the built-in DLNA Certied™ media server as you stream digital content to compatible media players (such as the D-Link’s Boxee Box). This feature is highly convenient as it allows you to turn o a computer that would normally be needed for the same function.
The availability of four dierent hard drive modes (Standard, JBOD, RAID 0, RAID 1) allows you to choose the conguration best suited to your needs. Standard mode creates two separately accessible hard drives. JBOD combines both drives in linear fashion for maximum space eciency. RAID 0 combines both drives in a ‘striped’ conguration, which provides the highest performance when using a Gigabit Ethernet connection. RAID 1 causes the drives to mirror each other, providing maximum protection. If one drive fails while congured as RAID 1, the unaected drive continues to function as a single drive until the failed drive is replaced. The new drive will then be re-mirrored, allowing the ShareCenter Pulse to return to its full protection.
1 Hard Drive(s) not included.
2 D-Link cannot guarantee full compatibility or proper playback with all codecs. Playback capability depends on the codec support of the UPnP™ AV media player.
1D-Link ShareCenter Pulse DNS-320 User Manual
Section 1 - Product Overview

Package Contents

• D-Link ShareCenter Pulse DNS-320
• CD-ROM with Manual and Software
• Quick Installation Guide
• Power Adapter
• Power Cord
• CAT5 Ethernet Cable
Note: Using a power supply with a dierent voltage than the one included with the ShareCenter Pulse will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.

System Requirements

For best results, the following minimum requirements are recommended on any system used to congure and use the ShareCenter Pulse:
• Computer with: 1GHz processor / 512 MB RAM / 200 MB available space / CD-ROM drive
• Internet Explorer version 7, Mozilla Firefox 3 or Apple Safari 4 and above
• Windows® XP (with Service Pack 2 or higher), Vista® or Windows® 7
• 3.5” SATA Hard Drive(s)
2D-Link ShareCenter Pulse DNS-320 User Manual
Section 1 - Product Overview

Features

The DNS-320 is an easy to install data storage platform used for remote access through a local network or from the Internet. This ShareCenter Pulse supports up to 2 SATA hard drives and includes the product features listed below:
• Two Hard Drive Bays for 3.5” SATA Hard Drives
• Gigabit Ethernet Connectivity
• Simplied Hard Drive Installation Process
• USB port support External Storage Device, Printer Server, UPS Monitoring
• Four Hard Drive Congurations: Standard, JBOD (Linear), RAID 0, and RAID 1
• Supports RAID Migration: Standard to RAID1
• HDD S.M.A.R.T test
• Supports NFS/AFP.
• Supports DDNS
• Supports UPnP, Bonjour
• Supports PnP-X / LLTD
• Built-in FTP Server for File Access Over the Internet
• FTP Server supports FTP over SSL/TLS and FXP
• Supports Uni-code for both Samba and FTP Server
• Scheduled Downloads from Web or FTP Sites
• Supports P2P Downloading
• Supports Local Backup
• Full or Incremental Backups
• Supports ISO mount Shares
• Power Management for Conserving Energy and Extending Hard Drive Life
• Supports Auto Power Recovery
• Supports Scheduled power o
• UPnP AV Server for Streaming Music, Photos, and Video to Compatible Media
• Designed for easy installation and allows remote access to important data via LAN or WAN.
• iTunes Software will be able to automatically nd and play music directly from the DNS-320
• D-Link Storage Utility
• Congurable by Web Browser
• Supports HTTPS Management Function
• Network Recycle Bin
• Supports Yahoo! Widget
• Supports System Logging/FTP Logging
• Automatic E-Mail and SMS Notications
• Supports Remote File Access
• Supports Apple Time Machine
• Supports USB Copy Function
• Supports FAT16/32, NTFS (Read only) for USB external Storage
• Users and Groups Can Be Assigned to Folders with Read or Read/Write Permissions
• Quotas For Users and Groups
3D-Link ShareCenter Pulse DNS-320 User Manual
Section 1 - Product Overview

Hardware Overview

Front Panel

HDD2 LED
USB LED
USB Port
Front Latch
HDD1 LED
Power LED
Power Button
USB Copy/ Unmount Button
COMPONENT DESCRIPTION
HDD1/HDD2 LED
USB LED This light will illuminate when a USB device is inserted into the USB Port. When there’s trac this light will blink.
USB Port This is the USB Port. Devices like a USB Print Server, UPS or USB drive can be inserted here.
Front Latch This latch can open and close by simply pressing it.
Power LED This light will illuminate when this ShareCenter Pulse is powered on.
These lights will be solid BLUE when drives are connected but inactive The lights will blink when the drives are being accessed, formatted or synchronized. They will illuminate AMBER if a drive has failed.
Power Button Press once to power on the device. To power down, press and hold the button until it begins to blink.
USB Copy /
Unmount Button
Press 1~3 seconds to copy data from a USB drive to your ShareCenter Pulse. Press and hold 5 seconds to unmount a USB drive.
4D-Link ShareCenter Pulse DNS-320 User Manual
Section 1 - Product Overview

Rear Panel (Connections)

Cover Lock
Cooling Fan
Gigabit Ethernet Port
Reset Button
Cable Hook
Power Receptacle
Security Lock
COMPONENT DESCRIPTION
Cover Lock This lock is used to remove the cover when unlocked. Locking it will restrict the removal of the top cover.
Cooling Fan
Reset Button Press this button for more than 5 seconds to reset the unit to factory defaults. Power Receptacle Connect the supplied power cord to the receptacle.
Gigabit Ethernet Port
Security Lock This lock can be used to tie the ShareCenter Pulse to the desk to prevent theft. Cables are sold separately.
The cooling fan is used to cool the hard drives and features speed control. When the unit is rst powered on the fans rotate at a low speed and rotate at a high speed when the temperature rises above 49 °C.
Use the Gigabit Ethernet Port to connect the device to the local network. The port is equipped with both a LAN LINK (R) and Trac LED (L) to indicate connectivity and trac respectively to the local LAN
5D-Link ShareCenter Pulse DNS-320 User Manual
Section 2 - Getting Started

Getting Started

ShareCenter Pulse Software CD

To get started with the ShareCenter Pulse Setup Wizard, insert the supplied CD into your CD-ROM drive:
Click the START button to start the ShareCenter Pulse Setup Wizard.
6D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

Installation

Setup Wizard

The Setup wizard will walk you through the conguration of your ShareCenter Pulse device.
Note: The computer used to access the your network is using a DHCP server, the
ShareCenter Pulse
ShareCenter Pulse
web-based conguration manager must be on the same subnet as the ShareCenter Pulse. If
will automatically be in the same subnet.
7D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

Install the Hard Drives

This step shows you how to open your ShareCenter Pulse so that you can install one or two hard drives. Click Next to continue.
Slide either one or two hard drives into the open hard drive bays of your device. Click Next to continue.
8D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation
Once the hard drives are installed, you can attach the top cover. Click Next to continue.
A standard CAT5E Ethernet cable with a RJ-45 connector is needed to connect your ShareCenter Pulse to your network. Click Next to continue.
9D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

Power and Device Selection

Connect the power adapter to the power receptor on the back of the device. Press the power button located under the faceplate LEDs to turn on the device. Click Next to continue.
With the power on check that the Power LED is solid. If it is solid, answer Yes to the conrmation window otherwise select No and wait for the power connection to the ShareCenter Pulse. If the connection is good then check that the hard drives are installed correctly and have no other issues. Click Next to continue.
Note: When you select your device from the list, it will cause the LEDs to blink to conrm the device selection.
10D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

Admin password

This window requests the Admin (administrator) password. If this is the rst installation of this device then the password will be blank. Click Next to continue.
In this step you can create a new password for the Admin username. It is recommended you set a password however you may also leave the elds blank. Click Next to continue.
11D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

Network Setup

You may use either Static IP or DHCP to configure the IP network settings of the ShareCenter Pulse. If you select Static IP then input the IP network settings. Click Next to continue.
If you want your ShareCenter Pulse to be part of a Windows Workgroup network, enter the parameters requested or leave the default settings that appear initially in the window. The name will be used whenever you map one of the ShareCenter Pulse volumes as a Network Drive. Click Next to continue.
12D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

Dynamic DNS

Click on the Yes radio button if you already have a DDNS account to use for the ShareCenter Pulse DDNS settings. If you do not have a DDNS account or do not want to use one, click on the No Radio button. Click Next to continue.
If you clicked Yes, enter the DDNS parameters requested in this window so that your ShareCenter Pulse can be accessed by a URL over the Internet. Click Next to continue.
13D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

DDNS Account and System Time

If you want a DDNS account to use with your ShareCenter Pulse, D-Link provides a free DDNS account by clicking on the web link shown. You will need to do the following:
• Create an account with a username and password.
• Create a hostname that the DDNS service will use to track your device no matter what the Local Network WAN settings are (i.e. public IP address).
• Congure your device with the hostname and DDNS service provider details.
• Congure your router to forward port 80.
Follow the steps listed here in order to create a DDNS account and congure your LAN equipment and ShareCenter Pulse to work with the new settings.
Congure the time, date and time zone settings here. Select the time zone from the drop-down menu. You can set the time and date manually, from a NTP server or from the computer’s settings.
14D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

E-mail Settings and Volume Information

You can congure messages to be sent alerting you to certain operational conditions and drive status conditions to your e-mail account. These alerts can prove helpful with the management and safeguarding of important data.
Enter your e-mail information and settings and then click Next to continue. If you do not want to congure your e-mail settings, click Skip to continue.
This step is informational and shows any currently congured Volumes previously setup on the ShareCenter Pulse. Click Next to continue.
15D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation
RAID Conguration and Drive Mapping
Select one of the Volume File Systems type. Clicking on each le system type radio button will give a description below.
For more information concerning the dierent RAID Disk Formats please refer to “What is RAID?” on page 98
Click Next to continue.
This step allows you to map the volume(s) created as network drive(s) on your computer. Click Next to continue.
16D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation
Conguration Summary and Drive Formatting
Review your volume conguration summary details here before clicking next and starting the drive format. If necessary use the PREV button to go back and recongure the RAID conguration of the volume(s). When you click NEXT a warning message will appear to conrm you want to format the drives as all the data on the drives will be deleted. Click on the No button if you are unsure.
During the hard drive formatting the wizard displays percentage complete bars.
17D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation

Format Complete

The wizard will show this window if the hard drive format(s) are successful. Click Next to continue.
18D-Link ShareCenter Pulse DNS-320 User Manual
Section 3 - Installation
The nal window of the installation wizard shows successful completion. Your device is now installed and ready for use. Your drives are network mapped from using the wizard so you will be able to access them under you My Computer icon.
19D-Link ShareCenter Pulse DNS-320 User Manual
Section 2 - Getting Started

D-Link Storage Utility

When rst powered on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device If you want to change the IP address before logging in or are unable to connect to the ShareCenter Pulse IP address, you can use the Storage Utility provided on the product CD to locate the device on your network and make any needed changes.
Network Storage
Device:
Refresh:
Conguration:
LAN:
Apply:
Drive Mapping:
Available Drive
Letters:
About:
Exit:
The D-Link Storage Utility displays any ShareCenter Pulse devices it detects on the network.
Click to refresh the device list.
Click Configuration to access the Web-based configuration of the ShareCenter Pulse.
Congure the LAN Settings for the ShareCenter Pulse here.
Click Apply to save and activate the changes to the LAN Settings.
Volumes available for mapping are displayed here.
Select an available drive letter. Click Connect to map the selected volume. Click Disconnect to disconnect the selected mapped volume.
Click About to view the software version of the Easy Search Utility.
Click Exit to close the utility.
20D-Link ShareCenter Pulse DNS-320 User Manual
Section 2 - Getting Started
Select the device from the list and click the Conguration button. This will launch the computer’s default web browser and direct it to the IP address listed for the device. Make sure the browser is not congured to use a proxy server.
Note: The computer used to access the ShareCenter Pulse web-based conguration manager must be on the same subnet as the ShareCenter Pulse. If your network is using a DHCP server and the computer receives IP settings from the DHCP server, the ShareCenter Pulse will automatically be in the same subnet.
21D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration
The Login screen will appear:
Select System Administrator and enter the password you created during the Setup Wizard.
Conguration

Web UI Login

Click Login
Note: The computer, used to access the web-based conguration, manager must be on the same subnet as the If your network is using a DHCP server and the computer receives IP settings from DHCP, the
be in the same subnet.
ShareCenter Pulse
ShareCenter Pulse
will automatically
.
22D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration

Web UI General Layout

If a hard disk volume has not been created, then the ShareCenter Pulse Web UI defaults to the Management tab. Once a volume is created, then the web UI defaults to the My Favorites tab. The conguration icons are located in the tabs at the top of the page. The icons available for conguration under each of the tabs include:
My Favorites - a user-congurable area where:
• Users can add customized access to preferable functions into My Favorites in order to give quick access to these functions.
Applications - Conguration for:
• FTP/HTTP and P2P Downloads.
• Remote and Local Backups.
• The Web File Server.
• Other applications which may be added to the page.
Management - Contains the:
• Setup Wizard - Step-through settings for accounts, time and date, and connectivity.
• Disk Management - Congures the Volume Setup and perform Disk Diagnostics.
• Account Management - Congures the Admin Password, Users, Groups, Quotas and Network Share Folders.
• Network Management - Congures the LAN settings and Dynamic DNS.
• Application Management - Congures File Sharing protocols and Add-On management.
• System Management - Congures the Time and Date, Device, System Settings, Power Management, Email Alerts, Logs, and Firmware settings.
These icons and their conguration sub-menus will be discussed in detail in the following pages of this manual.
Note: After logging in to the ShareCenter Pulse for the rst time it is recommended to add a password to the admin account.
23D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration

Management

This tab contains the Setup Wizard, Disk Management, Account Management, Network Management, Application Management, System Management and Status Icons. Click each of the icons to see the submenus.
24D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration

Setup Wizard (Web UI)

The ShareCenter Pulse has a System Wizard that allows you to quickly congure some of the basic device settings. Click the System Wizard icon to start the Setup Wizard.
Click the Run Wizard button to start the setup wizard.
Click Next to continue.
25D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration
It is recommended you set an admin password here. Enter the new password and re-enter it for conrmation. Click Next to continue.
Set the appropriate Time Zone for your location. Click Next to continue.
26D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration
Edit or change the LAN settings. Selecting DHCP Client will cause the device to obtain an IP address from the local DHCP server such as a router. Selecting Static IP requires you to assign the IP information manually. Click Next to continue.
Enter your workgroup, name and description, or leave the default values and click Next to continue.
27D-Link ShareCenter Pulse DNS-320 User Manual
Loading...
+ 81 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use