D-Link DGS-1008P User Manual

j/3

FCC Warning

This equipment has been tested and found to comply with the regulations for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
this user’s guide, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his/her own expense.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.

VCCI Warning

This is a product of VCCI Class B Compliance.

注意

この装置は、情報処理装置等電波障害自主規制協議(VCCI)の基準に基づくクテス B 情報技術装置です。

この装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近
接して使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをして下さい。

UL Warning

a) Elevated Operating Ambient Temperature- If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an environment compatible with the
manufacturer's maximum rated ambient temperature (Tmra).

b) Reduced Air Flow- Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.

c) Mechanical Loading- mounting of the equipment in the rack should be such that a hazardous condition is
not achieved due to uneven mechanical loading.

d) Circuit Overloading- Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of circuits might have on over current protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

e) Reliable Earthing- Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch circuit (e.g., use
of power strips).

Table of Contents D-Link Web Smart Switch User Manual

Table of Contents

Table of Contents ............................................................................................................................................. i

About This Guide............................................................................................................................................. 2

Terms/Usage.................................................................................................................................................. 2

Copyright and Trademarks ............................................................................................................................ 2

Product Introduction ....................................................................................................................................... 3

Product Outlook ............................................................................................................................................. 3

Front Panel ................................................................................................................................................. 3

Rear Panel.................................................................................................................................................. 4

Hardware Installation ...................................................................................................................................... 5

Step 1: Unpacking.......................................................................................................................................... 5

Step 2: Switch Installation.............................................................................................................................. 5

Step 4 – Power on the Switch........................................................................................................................ 5

Understanding The Switch Features ............................................................................................................. 6

Cable Diagnostics .......................................................................................................................................... 6

PoE Rule ........................................................................................................................................................ 6

QoS ................................................................................................................................................................ 6

Power Saving ................................................................................................................................................. 6

Appendix A - Technical Specifications ......................................................................................................... 8

Hardware Specifications ................................................................................................................................ 8

Key Components / Performance ................................................................................................................ 8

Port Functions ............................................................................................................................................ 8

Physical & Environment ............................................................................................................................. 8

Emission (EMI) Certifications ..................................................................................................................... 8

Safety Certifications.................................................................................................................................... 8

Features ......................................................................................................................................................... 8

General Features........................................................................................................................................ 8

PoE Features.............................................................................................................................................. 8

ii

About This Guide D-Link Web Smart Switch User Manual

About This Guide

This guide provides instructions to install the D-Link 8-port Gigabit Ethernet PoE Switch DGS-1008P.

Terms/Usage

In this guide, the term “Switch” (first letter capitalized) refers to the DGS-1008P, and “switch” (first letter lower
case) refers to other Ethernet switches. Some technologies refer to terms “switch”, “bridge” and “switching
hubs” interchangeably, and both are commonly accepted for Ethernet switches.

A NOTE indicates important information that
helps a better use of the device.

A CAUTION indicates potential property damage
or personal injury.

Copyright and Trademarks

Information in this document is subjected to change without notice.
© 2010 D-Link Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly

forbidden.
Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft

and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. D-Link Corporation disclaims any proprietary interest in trademarks and
trade names other than its own.

2