D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or
organization of such revisions or changes.
Manual Revisions
RevisionDateDescription
1.0August 06, 2013DCS-3511 Revision A1 with firmware version 1.00
1.1September 09, 2014add RF Warranty Sentence
1.2October 16, 2015Minor updates
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
*Depending on your region, a power adapter may not be included.
If any of the above items are missing, please contact your reseller.
5
D-Link DCS-3511 User Manual
Product Overview
System Requirements
Operating System: Microsoft Windows ®, 2000, XP, Vista, 7
Memory : At least 256MB of memory (512MB recommended) Web Browser: Internet Explorer 7 or higher, Firefox, Chrome, Safari VGA card resolution: SVGA or XGA (1024x768 or above) CPU: 1.7GHz or above (2.8GHz plus processor with 512MB memory and a 32MB video card is required for
multiple camera viewing and recording in IP surveillance program)
An available Ethernet connection
6
D-Link DCS-3511 User Manual
Product Overview
Introduction
DCS-3511 are HD, full frame rate network camera with H.264 compression. The
video over the Internet. With the vivid video quality and superb high resolution, it can provide most detail of the video which is useful to
identify any suspected object. DCS-3511 provide multiple streaming and flexible viewing window settings for different purpose of
surveillance, either for regular recording or mobile view. Built-in microSD card slot can record important events in microSD card as a local
backup and it's very easy to retrieve.
The included D-Link D-ViewCam™ is sophisticated software which allows users to manage up to 32 network cameras, set e-mail alert
notications, create recording schedules, and use motion detection to record directly to a hard drive. D-ViewCam™ also allows users to upload a
oor plan to create a realistic layout of the premises where cameras are located, further simplifying the management process.
DCS-3511 connect to a network to provide high-quality live
7
D-Link DCS-3511 User Manual
Product Overview
Features
HD Surveillance
DCS-3511 provide HD industrial standard 16:9 wide screen video for IP surveillance. With the vari-focal lens, it is a high performance high quality
network camera. To utilize the advantage of high resolution, the "viewing window" design can provide user a flexible settings to monitor
multiple ROI (Region of Interest) by a single camera. And the "ePTZ" can also simulate wide area surveillance by digital zoom and pan, tilt
control.
Flexible Connectivity
The DCS-3511 incorporates Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for
supplemental power cabling.
8
D-Link DCS-3511 User Manual
Product Overview
Hardware Overview
Front Panel
ICR Sensor
The IR-Cut Removable sensor
judges lighting conditions and
switches from color to infrared
accordingly
9
D-Link DCS-3511 User Manual
Product Overview
ETHRNET(PoE)
RESET
AUDIOIN/OUT
12V 1.5A
Rear Panel
LED
Power and
network indicator
ETHERNET (PoE)
DC Power
12V DC
12V 1.5A
RESET
AUDIO
IN/OUT
Reset
Press and hold this button for 10
seconds to reset the camera back
to the factory default settings
Audio Input/Output
Use to connect an
external microphone
or speaker
Ethernet (PoE)
RJ-45 connector for Ethernet which
can also be used to power the
camera using PoE
(PoE only available on the DCS-3511)
10
D-Link DCS-3511 User Manual
Product Overview
Side Panel
microSD Card Slot
Local microSD card for storing
recorded images and video
DC-Iris Connector
Connector for DC iris lens
Focal Length
Manually adjust the
focal length
Focus
Manually adjust focus
11
D-Link DCS-3511 User Manual
Product Overview
Wire Clip
Cable management
Button Panel
Built-in MIC
Internal microphone
I/O Connector
I/O connectors for
external devices
Mounting Nut
1/4' x 20 nut for axing camera to
mounting bracket
12
D-Link DCS-3511 User Manual
InstallationInstallation
Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device
has obtained an IP address and is accessible, the LED will turn green.
13
D-Link DCS-3511 User Manual
Installation
Conguration with Wizard
Insert the DCS-3511 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled,
or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your
CD-ROM drive.
Click Setup Wizard to begin the installation.
After clicking Setup Wizard, the following window will open.
Click Next to continue.
14
D-Link DCS-3511 User Manual
Installation
Click Yes to accept the License Agreement.
To start the installation process, click Next.
Note: The installation may take several minutes to nish.
15
D-Link DCS-3511 User Manual
Installation
Click Finish to complete the installation.
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start
menu.
Start > D-Link > Setup Wizard SE
16
D-Link DCS-3511 User Manual
Installation
The Setup Wizard will appear and display the MAC address and IP address of your
camera(s). If you have a DHCP server on your network, a valid IP Address will be
displayed. If your network does not use a DHCP server, the network camera's
default static IP 192.168.0.20 will be displayed.
Click the Wizard button to continue.
Enter the Admin ID and password. When logging in for the rst time, the default
Admin ID is admin with the password left blank.
Click Next, to proceed to the next page.
17
D-Link DCS-3511 User Manual
Installation
Select DHCP if your camera obtains an IP address automatically when it boots up.
Select static IP if the camera will use the same IP address each time it is started.
Click Next, to proceed to the next page.
Take a moment to conrm your settings and click Restart.
18
D-Link DCS-3511 User Manual
Installation
Viewing Camera via Web Browser
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start
menu.
Start > D-Link > Setup Wizard SE
Select the camera and click the button labeled "Link" to access the web
conguration.
The Setup Wizard will automatically open your web browser to the IP address of the
camera.
19
D-Link DCS-3511 User Manual
Installation
Enter admin as the default username and leave the password blank. Click OK to
continue.
This section shows your camera’s live video. You can select your video prole and
view or operate the camera. For additional information about web conguration,
please refer to the user manual included on the CD-ROM or the D-Link website.
20
D-Link DCS-3511 User Manual
Installation
D-ViewCam Setup Wizard
D-ViewCam software is included for the administrator to manage multiple D-Link
IP cameras remotely. You may use the software to congure all the advanced
settings for your cameras. D-ViewCam is a comprehensive management tool for IP
surveillance.
Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown
below.
Follow the Installation Wizard to install D-ViewCam.
21
D-Link DCS-3511 User Manual
Installation
Click Finish to complete the installation.
To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam >Main Console.
For more information about D-ViewCam, please refer to the documentation on the
D-ViewCam CD-ROM.
22
D-Link DCS-3511 User Manual
CongurationConguration
Live Video
When you connect to the camera's web interface you will see the following page. This is the Live Video page which will allow you to view the
camera's video feed and control basic camera functions using the icons on the screen. Please refer to the tables on the following pages for
detailed information about the icons on this screen.
23
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.