DCH-S161
Wi-Fi Water Sensor
Product Highlights
Water Detection Alerts
Instant push notication when
water is detected
Battery Powered
Lasts up to 1.5 years on 2 AA
batteries
Smart Home Compatible
Works with mydlink Smart Home
Devices, the Google Assistant and
3
IFTTT
1
2
Protect Your Home
The DCH-S161 Wi-Fi Water Sensor is a wireless sensor that helps keep your home safe. You can install the
probe anywhere and it will help you detect water leaks before it turns into serious ooding. If the water
sensor is triggered, a 90 dB alarm will sound and an LED will blink to give you audio and visual warnings.
Push notications to your mobile device let you keep tabs on your home on the go. You can also receive
audio alerts from your Google Assistant so that you can know about a water leak even if you are too far
away to hear the alarm on the water sensor.
Easy to Set Up
The DCH-S161 can be set up easily via the free mydlinkTM app4. Simply download and install the app
on your mobile device and follow the step-by-step instructions to quickly congure the sensor. The
DCH-S161 connects to your existing Wi-Fi router, no hub required. In addition, you can congure policies
to trigger other connected home devices whenever the DCH-S161 detects water.
Specially Designed Detection Cable
The water detection sensor supplied with the DCH-S161 is designed specically to detect water on
contact. When water is detected, the sensor will trigger both an alarm siren and an alarm LED so you can
both hear and see the warning. The sensor is at the end of a 1.8 m (5.9 ft) cable, allowing you to place the
sensor anywhere that’s convenient.
Access Anywhere Using the Mobile App
When water is detected the mydlinkTM app sends push notications to your mobile device no matter
where you are. With instant notications, you can rest assured that you are always immediately aware of
any problems so you can act fast.
Features
♦ Compatible with the Google
Assistant and IFTTT
♦ Get audio alerts from your Google
Assistant
♦ 90 decibel siren
♦ Wireless 802.11n/g compatibility
♦ WPA/WPA2 wireless encryption
♦ mydlink
♦ Firmware Over The Air (FOTA)
♦ Low battery notication
♦ 1.8 m (5.9 ft) cable for water detector
TM
app integration
Product Images
DCH-S161 Wi-Fi Water Sensor
Front View
Action Button/LED
Water Sensor Probe
Technical Specications
General
Device Interfaces • 802.11n/g wireless
Standards • IEEE 802.11n • IEEE 802.11g
Wireless Frequency Range • 2.4 GHz to 2.4835 GHz
• Action button
LED • Status
Reset Button
Siren
Battery
Compartment
Back View
Mounting Holes
• Reset button
Water Sensor Probe • 1.8 m (5.9 ft)
Antennas • 1 x internal antenna
Alarm Volume • 90 dB
Functionality
Wireless Encryption • Wi-Fi Protected Access (WPA/WPA2)
Supported Features • Google Assistant
• Push notifications
• IFTTT
TM
Device Management • mydlink
app
Physical
Dimensions • 68 x 68 x 31 mm (2.68 x 2.68 x 1.22 in)
Weight • Device: 60 g ± 5 g (2.12 oz ± 0.18 oz) • Probe: 17 g ± 5 g (0.60 oz ± 0.18 oz)
Power • 2 x AA batteries
Temperature • Operating: 0 to 40 °C (32 to 104 °F) • Storage: -20 to 65 °C (-4 to 149 °F)
Humidity (main unit) • Operating: 10% to 90% non-condensing • Storage: 5% to 95% non-condensing
Certifications • FCC
• IC
1
This product is intended solely to help reduce damage caused by a water leak. D-Link disclaims all liability for any water damage that occurs as result of the failure of this product to properly function.
2
1.5 year battery life based on standby time with no detections.
3
Please visit mydlink.dlink.com for more information on mydlink products that support Smart Home functionality
4
Please refer to the mobile app’s store page to check whether your device is compatible.
• CE
Updated 2019/1/18
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other
trademarks belong to their respective owners.
©2019 D-Link Corporation. All rights reserved.