Denver NVI-500 Operating Manual

Digital Night Vision Mononuclar

Operating Manual

Model: DENVER NVI-500

【Contents】

Introduction················ 3
Operating Hints················ 4
Components Introduction················ 5
Operating Instructions················ 7

Battery Installation············ 7
Power On················ 8
Power Off················ 8
Scenery Observation············ 9
Brightness Adjustment········ 10
Photo Shooting················ 13
Playback················ 14
Video Shooting················ 16

Monitors Connection············ 17
PCs Connection··············· 17

Auto Power Off··············· 17
Power management··················· 18
Basic Parameters··················· 19
Configuration Standard················· 21
Operating Environment and Announcements····· 22

【Name】 Digital Night Vision
【Model】 DENVER NVI-500
【Features】

● It is a night vision monocular which can be used to

observe objects in the dark and low light situation.
Two lighting modes a re av ai la ble to use. The
viewing distance in the low light environment will
be at infinity, 200 meters viewing distance in the
dark environment.

● Easy to exchange data with other instruments，
having USB, AV OUT and DC IN sockets.

● It can be used normally in the day or night, owning
the photo shooting, video shooting, playback and other
functions. 5X fixed zoom and 8X digital zoom.

● It is the best auxiliary tool of extending human’s

visual senses.

【Operating Hints】

● It is a night vision monocular which can be used to

observe objects in the dark and low light situation. Two
lighting modes are available to use.

● It is suitable to use in full dark environment.

● Turn the auxiliary light on to observe the objects

when it works in the dark situation. Adjusting the
brightness by the distance of the objects. CCD is used in
this viewer. If there is any light resource existed, the
auxiliary light could not be turned on, please adjust the
focal distance only to get the sharp image of objects.

● Work time: 1 hour under auxiliary light mode;

1.5

hour without using auxiliary light mode.

Contents

DENVER NVI-500

ENG-1

Introduction

DENVER NVI-500

ENG-3

Operating Hints

DENVER NVI-500

ENG-4

Contents

DENVER NVI-500

ENG-2

1 2 3 4 5 6 7 8 9 10 11

1 - Objective Cover
2 - Objective Focusing Wheel
3 - High Beam Light
4 - Socket Door
5 - DC 5V
6 - USB2.0
7 - Video/Aud io Ou tput Connecto r
8 - Tripod Receptacle
9 - Battery Cover
10 - Diopter Ring
11 - Eyecup

12

13

14

15

161718

12 - Hand Grip Strap
13 - Up
14 - Down
15- Functions(for photos shooting, video shooting and
playback)
16 - Auxiliary Lighting/Brightness Adjustment
17 - POWER/FUNCTION
18 - Diopter Dial

【Battery Installation】

● Turn the battery cover

down ； insert one battery
correctly (note the
negative electrodes
bottomed) and turn the cover back. Turn the viewer on,
the screen could be lighten up if the battery installed
correctly. Otherwise, please reinstall the battery again or
tighten the cover again.

【Announcements】

Ensure the model of battery should be correct;

Ensure the electric quantity should be full enough;

Pay attention to + and – of the battery.

【Power On】

● Tak e the objective

cover down.

● Long press#19 for 3

seconds to lighten
screen up，observing
from Eyecup(#11)，
if the screen has been lighten up and icons have
been shown normally, the viewer could be used
then

● Icons Instructions：

1 Battery
2 Images Size
3 Current Mode: Photo Shooting Mode
4 SD card in

● The Observing (Photo Shooting) Mode is available

to use after the startup.

【Power Off】

● In any mode, long press #17 for 3 seconds to turn

it off.

Components Introduction

DENVER NVI-500

ENG-5

Operating Instructions

DENVER NVI-500

ENG-7

Operating Instructions

DENVER NVI-500

ENG-8

Components Introduction

DENVER NVI-500

ENG-6

03727

SD

1 2 3

4