Denver NVI-450 User manual

DENVER NVI-450
Cont en t s
Digital Night Vision Mononuclar
Operating Manual
Model: DENVER NVI-450
Contents	Monitors Connection·······················17
Introduction······························3	PCs Connection···························17
Operating Hints···························4	Auto Power Off····························17
Components Introduction···················5	Power management·························18
Operating Instructions······················7	Basic Parameters···························19
Battery Installation························7	Configuration Standard······················21
Power On·······························8	Operating Environment and Announcements·····22
Power Off·······························8
Scenery Observation······················9
Brightness Adjustment····················10
Photo Shooting··························13
Playback·······························14
Video Shooting··························16

21

DENVER NVI-450

InOpert oadutinc gt i oHint s

Name Digital Night VisionModel DENVER NVI-450Features

●It is a night vision monocular which can be used to observe objects in the dark and low light situation. Two lighting modes are available to use. The viewing distance in the low light environment will be at infinity, 200 meters viewing distance in the dark environment.

●Easy to exchange data with other instruments having USB, AV OUT and DC IN sockets.

43

●It can be used normally in the day or night, owning the photo shooting, video shooting, playback and other functions. 5X fixed zoom and 5X digital zoom.

●It is the best auxiliary tool of extending human’s visual senses.

Operating Hints

●It is a night vision monocular which can be used to observe objects in the dark and low light situation. Two lighting modes are available to use.

●It is suitable to use in full dark environment.

●Turn the auxiliary light on to observe the objects when it works in the dark situation. Adjusting the brightness by the distance of the objects. CCD is used in this viewer. If there is any light resource existed, the auxiliary light could not be turned on, please adjust the focal distance only to get the sharp image of objects.

●Work time: 1 hour under auxiliary light mode; 1.5 hour without using auxiliary light mode.

DENVER NVI-450

Componen t s Int r oduc t i on

1

2

3

4

5

6

7

8

9

10

11

1 - Objective Cover

2 - Objective Focusing Wheel

3 - High Beam Light

4 - Socket Door

5 -Micro SD card Slot (Not Incl.)

6 - USB2.0

7 – DC 5V

8 - Tripod Receptacle

9 - Battery Cover

10 - Diopter Ring

11 - Eyecup

65

12

13 14 15 16 17

18

12 - Hand Grip Strap

13 - Up

14 - Down

15Functions(for photos shooting, video shooting and playback)

16 - Auxiliary Lighting/Brightness Adjustment

17 - POWER/FUNCTION

18 - Diopter Dial

DENVER NVI-450
Opera t i ng Ins t ruc t i on s
Battery Installation			Power On
				1	2	3	4
● Turn the battery cover		●	Take	the objective
down insert one battery		cover down.
correctly (note the negative			● Long	press#17 for
electrodes bottomed) and turn the cover back. Turn the			3 seconds to lighten		03727	SD
viewer on, the screen could be lighten up if the battery			screen
installed correctly. Otherwise, please reinstall the battery			up observing from Eyecup(#11) if the screen
again or tighten the cover again.			has been lighten up and icons have been shown
			normally, the viewer could be used then
		●	Icons Instructions
Announcements		1		Battery
Ensure the model of battery should be correct;		2		Images Size
Ensure the electric quantity should be full enough;		3		Current Mode: Photo Shooting Mode
Pay attention to the anode and the cathode of the battery.		4		SD card in
		●	The Observing (Photo Shooting) Mode is available
		to use after the startup.
	87		Power Off
		●	In any mode, long press #17 for 3 seconds to turn it
		off.