Specifications and Main Features
- Nomenclature: DRA-F101
- Average Output Power: 35W + 35W (4 Ohms, DIN, @1kHz, T.H.D =0.7 percent)
- Speaker Power: 4 to 16 Ohms
- Input Requirements/Input Impedance:
- PHONO: 2.5 mV / 47 KOhm
- CD, DVD/AUX, TAPE, MD: 300 mV / 47 KOhm
- Recout Terminal Phono EQ Preamp Maximim Output: 150mV
- T.R.I.A.A for R.I.A.A: Deviation (PHONO): 20 Hz to 20 kHz +0.5 dB range amplified.
- SN Quotient (During IHF A Network):
- PHONO Section: 80 dB (at 5mv of input voltage and the input terminal was shunted)
- CD Player, DVD Player, AUX, tape, MD section: 90 dB With SOURCE DIRECT: ON
- 20 dB Bandwidth: 5 Hertz to 80 Kilohertz: plus 0.5, minus 3 decibels SOURCE DIRECT: ON range of frequencies only the program material was direct.
- Tone Control Range:
- BASS: 100 Hz +8 dB
- TREBLE: 10 kHz +8 dB
- LOUDNESS: 100 Hz +8 dB, 10 kHz +6 dB
- Tuner Section:
- FM Reception Frequency Range: 87.50MHz to 108.00MHz and 522kHz to 1611kHz
- Practical Sensitivity: FM: 1.2 μV/75 Ω (12.8 dBf), AM: 18 μV
- FM Stereo Isolation: 40 dB 1kHz
- FM S/N Ratio Monaural:74 dB Stereo: 70dB
- Distortion on FM Harmonic: Monaural: 0.3% Stereo 0.4%
- Clock Timer: Section
- Timekeeping System: This refers to the system that will help in attending control over the source frequency.
- Timekeeping Accuracy: Has a variance of 30 seconds per month
- Timer Settings: Daily timer (single setting available), one-time timer (single configuration available), and a sleep timer with 60 minutes as the upper cap.
- Electric Supply: AC 230 V, 50 Hz supply,
- Electric Consumption: 85W, with rough estimates suggesting a standby power of 1 W
- Size: 250 mm by 81.5 mm by 285 mm, (Width x Height x Depth)
- Weight: There is net weight of 3.5 kg
- Remote Control Unit (RC-927):
- Control via remote: infrared pulse system
- Voltage Rating: 3 V DC dry cell batteries (two R03, AAA type)
- Overall Size: 48 x 210 x 29 mm (width x height x thickness)
- Weight: 120 grams with the batteries also included
Frequently Asked Questions
Q1: How much power is produced by the DRA-F101 receiver?
A1: The specified output power for the receiver is (4 Ω,35W + 35W ).
Q2: Describe the input options presented by DRA-F101.
A2: Has a variety of sensitivity levels from 2.5 mV to 300 mV, with known inputs as PHONO, CD, DVD/AUX, tape and MD.
Q3: Describe the frequency response of the device.
A3: It spells out frequency ranges from 5 Hz to 80 kHz and allows for variances of 0.5 to 3 dB in SOURCE DIRECT mode.
Q4: Where can I find the timer settings on DRA-F101?
A4: Yes. The DRA-F101 has all the required timer settings, including an everyday or a weekly timer, a once timer, as well as a sleep timer which allows a maximum of 60 minutes.
Q5: What is the standby power for the DRA-F101 model?
A5: In the standby mode, it consumes around 1 watt of power.
Q6: What is the overall weight of DRA-F101?
A6: The off weight of DRA-F101 is approximately 3.5 kg.
Q7: Is there a remote that comes with the DRA-F101?
A7: Yes, it includes an RC-927 remote-controlled unit which works on infrared pulse reception and requires two AAA batteries.
User Manual
Loading...