Denon AVR-4308CI User Manual

Display Description

Updating failed Updating failed. Login failed Failure to log into server. Server is busy Server is busy. Wait a while then try again. Connection fail Failure connecting to server.

b If the display reads as shown below, check the settings and network

environment, then update again.

Firmware Update

Update the ﬁ rmware of the receiver.

Check for Update

You can check for ﬁ rmware updates. You can also check approximately how long it will take to complete an update.

Start

Execute the update process. When updating starts, the power indicator becomes red and the GUI screen is shut down. The amount of update time which has elapsed is displayed. When updating is complete the power indicator becomes green and normal status is resumed.

b If the upgrade is not successful, an error message identical to those

in “Firmware Update” will appear on the display, check the settings and network environment, then update again.

Add New Feature

Display the new functions (payment required) which can be purchased for downloading to the AVR-4308CI and upgrade.

Upgrade

Execute the upgrade process. When updating starts, the power indicator becomes red and the GUI screen is shut down. The amount of update time which has elapsed is displayed. When updating is complete the power indicator becomes green and normal status is resumed.

When you purchase a new function and register your user information, “Registered” is displayed on this menu and you can proceed with the upgrade.

Notes concerning use of “Firmware Update” and “Add New Feature”

• In order to use these functions, you must have the correct system requirements and settings for a broadband Internet connection.

• Do not turn off the power until updating or upgrating is completed.

• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/upgrading procedure to be completed.

Once updating/upgrade starts, normal operations on the

AVR-4308CI cannot be performed until updating/upgrading is completed.

Furthermore, updating/upgrading the ﬁ rmware may reset the

backup data for the parameters, etc., set for the AVR-4308CI.

AV SURROUND RECEIVER

AVR-4308CI Addendum Sheet

Thank you for purchasing DENON’s product. When you operate the unit, please read the owner’s manual and this sheet.

vpage 35 :

Correction

vpage 37 :

Additional Information

vpage 37 :

Correction

Information regarding the “Firmware Update” function and “Add New Feature” will be announced on the DENON web site each time related plans are deﬁ ned.

Printed in Japan 5431 10016 003D

Option Setup

Make various other settings.

F Menu tree F

Manual Setup

Option Setup

a Amp Assign s Volume Control d Source Delete f GUI g Quick Select Name h Trigger Out 1 j Trigger Out 2 k Digital Out l Remote ID A0 2Way Remote A1 Dimmer A2 Setup Lock A3 Maintenance Mode A4 Firmware Update A5 Add New Feature