Operator’s Manual
15 Amp/4.0 Peak HP Motor
Electric Chain Saw
Model No.
172.34120 18-In. Bar
CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product.
•WARRANTY
•SAFETY
•UNPACKING
•ASSEMBLY
•OPERATION
•MAINTENANCE
•PARTS LIST
•ESPAÑOL
TABLE OF CONTENTS
Warranty……………………………..........................................……………..Page |
2 |
Safety Symbols……………………..........................................……………..Page |
3 |
Safety Instructions……………………..........................................……….....Pages |
4 - 13 |
Unpacking..……………………………...........................………………….....Page |
13 |
Description………………………………..........................................………..Pages 14 - 15
Assembly and Adjustments………………………………..............................Pages 16 - 18
Operation Terms...................………………………......................................Pages 19
Operation...................………………………..........................................…...Pages 20 - 28
Maintenance/Trouble Shooting..........………...............................………....Pages 29 - 30
Specifications..........…………………….......................................................Pages 31
Parts Lists.......……………………..........................................……………....Pages 32 - 34
CRAFTSMAN LIMITED WARRANTY
FOR TWO YEARS from the date of sale, this product is warranted against defects in material or workmanship.
WITH PROOF OF SALE, a defective product will be replaced free of charge.
For warranty coverage details or to obtain free replacement, visit the web site: www.craftsman.com
This warranty does not cover the bar and chain, which are expendable parts that can wear out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
NOTE: Chain and Bar Oil is not included. BEFORE using this Chain Saw, do not forget to purchase Craftsman Bar & Chain Oil, SAE30.
! WARNING: Some dust particles created by lawn and garden tools contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•Compounds in fertilizers, herbicides, pesticides, and insecticides.
•Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do this type of work. To reduce your exposure to these chemicals:
•Work in a well-ventilated area
•Work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this manual, including all safety alert symbols such as “DANGER,” “WARNING,” and “CAUTION” before using this rotary tool. Failure to follow
all instructions listed in this manual may result in electric shock, fire and/or serious personal injury.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May be used in conjunction with other symbols or pictographs.
DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.
WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.
CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could lead to equipment or other property damage if they are not followed. Each message is preceded by the word “NOTE,” as in the example below:
NOTE: Equipment and/or property damage may result if these instructions are not followed.
WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician.
WARNING: The operation of any power tools can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shield and a full face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1 shields.
|
|
3025736 |
2 |
3 |
|
SAFETY INSTRUCTIONS
! WARNING: If correctly used, this electric Chain Saw is an efficient tool to use; if used improperly or without the due precautions it could become a
dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety rules that are contained in this manual.
! WARNING: BE SURE to read and understand all instructions in this manual before using this electric Chain Saw. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
! WARNING: To avoid mistakes that could cause serious injury, DO NOT connect the Chain Saw to the power source until the following instructions have been read and understood.
! WARNING: Consider the work area environment. Use extreme caution when cutting small size brush and saplings because the slender material may catch the saw chain and be whipped toward you or pull you off balance. DO NOT operate a chain saw in a tree unless specifically trained to do so. When cutting a limb that is under tension be alert for spring back so that you will not be struck when the tension in the wood fibers is released.
GENERAL POWER TOOL SAFETY WARNINGS
! WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term power tool in the warnings refers to your electric (corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
•Avoid Dangerous Environment - Don't use appliances in damp or wet locations.
•Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
•Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
•Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
•Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
•Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
•Do Not Abuse Cord - Never carry appliance by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.
Damaged or entangled cords increase the risk of electric shock.
•When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
•Operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.
4
SAFETY INSTRUCTIONS cont.
PERSONAL SAFETY
•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
•Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
Hearing |
Safety Helmet |
|
Protection |
||
Protection |
||
|
Eye
Snug Fitting Protection
Clothing 
Heavy Duty
Gloves
Safety Chaps
Safety Shoes
•Avoid Unintentional Starting - Do not carry plugged-in appliance with finger on switch.
Be sure switch is off when plugging in.
•Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
•Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
•Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
•If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
•Don't grasp the exposed cutting blades or cutting edges when picking up or holding the appliance r power tool.
•Don't Force Appliance/Power Tool - It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
•Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
•Maintain Appliance With Care - Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
•USE ONLY chains that are recommended for this Chain Saw. Chains that may be suitable for one Chain Saw may become hazardous when used on another Chain Saw.
•Keep the chain saw a sufficient distance away from electrical power lines.
SERVICE
•Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
5
SAFETY INSTRUCTIONS cont. |
ELECTRICAL SAFETY |
|
|
! WARNING: Do not permit fingers to touch the terminals of plug when installing or removing the extension cord from the plug.
1. Double insulated tools are equipped with a polarized plug
(one blade is wider than the other and will require the use of a polarized extension cord. The Chain Saw’s plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain
a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper outlet. Do not change or alter the equipment plug,
extension cord receptacle, or extension cord plug in any way.
2.Double insulation 
eliminates the need for the three-wire grounded power cord and grounded power supply system. Applicable only to Class II (double-insulated) tools. This Chain Saw is a double insulated tool.
! WARNING: GFCI (Ground Fault Circuit Interrupter) protection should be provided on all circuits or outlets to be used for electric chain saws and lawn and garden power tools. Receptacles are available having built-in GFCI protection and should be used for this measure of protection.
•Double insulation DOES NOT take the place of normal safety precautions when operating this tool.
•Guard against electric shock: Prevent body contact with grounded surfaces. For example: metal pipes, wire fences.
3.BEFORE plugging in the tool, BE SURE that the outlet voltage supplied is within the voltage marked on the tool’s data plate. DO NOT use “AC only” rated tools with a DC power supply.
4.DO NOT expose tools to rain or wet conditions or use electric tools in wet or damp locations. Water entering an electric tool will increase the risk of electric shock.
5.If operating an electric tool in damp locations is unavoidable, ALWAYS USE a Ground Fault Circuit Interrupter to supply power to your tool. ALWAYS WEAR electrician’s rubber gloves and footwear in damp conditions.
6.To reduce the risk of electric shock, use only with an extension cord intended for outdoor use, such as an extension cord of cord type: SW-A, SOW-A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-A. or SJTOW-A.
7.INSPECT tool cords for damage. Have damaged tool cords repaired at a Sears Service Center. BE SURE to stay constantly aware of the cord location and keep it well away
from the cutting blade.
8.DO NOT abuse the extension cord. NEVER use the cord to carry the tool by or to
pull the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
EXTENSION CORDS
Use a proper extension cord. ONLY use cords listed by Underwriters Laboratories (UL). Other extension cords can cause a drop in line voltage, resulting in a loss of power
and overheating of tool.
For this tool an AWG (American Wire Gauge) size of a least 14-gauge is recommended for an extension cord of 25-ft. or less in length. Use 12-gauge for an extension cord
of 50-ft. Extension cords 100-ft. or longer are not recommended.
6
SAFETY INSTRUCTIONS cont. EXTENSION CORDS cont.
Remember, a smaller wire gauge size has greater capacity than a larger number
(14-gauge wire has more capacity than 16-gauge wire; 12-gauge wire has more capacity than 14-gauge). When in doubt use the smaller number.
Minimum guage for extension cords
! CAUTION: Keep the extension cord clear of the work area. Position the cord so that it will not get caught on bushes, hedges, tree trunks, lawnmowers or other obstructions while you are working with the Chain Saw.
! WARNING: Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock, resulting in serious injury.
SAFETY SYMBOLS FOR YOUR TOOL
The label on your tool may include the following symbols.
V................ |
Volts |
||||||
A................ |
Amps |
||||||
Hz.............. |
Hertz |
||||||
W............... |
Watts |
||||||
min............ |
Minutes |
||||||
|
|
|
|
............. |
|
Alternating current |
|
|
|
|
|
|
|
Direct current |
|
|
|
|
|
|
|
||
|
|
|
|
. |
.......... |
||
no |
|||||||
No-load speed |
|||||||
.../min....... |
Revolutions or Strokes per minute |
||||||
|
|
|
............. |
|
|
Indicates danger, warning or caution. |
|
|
|
|
|
|
|
It means attention! Your safety is |
|
|
|
|
|
|
|
involved. |
|
.........Tip contact may cause the guide bar to move suddenly upward and backwards, which may cause serious injury to user.
.........Contact of the guide bar tip with any object should be avoided.
.........Read and follow all safety precautions in the owner’s manual Failure to follow to instruction
could result in serious injury to user.
.........Do not expose to rain.
......... Remove plug from mains immediately if the cable is damaged or cut.
7
.........Protective goggles/visor, helmet & hearing protection.
.........Gloves with saw protection.
.........Boots with saw protection, steel-toe cap and non-slip sole.
......... Wear dust mask.
.........Do not use one handed when operating the chain saw.
.........Always use two hands when operating the chain saw.
..........Class II construction, 
Double-Insulation. When servicing, use only identical replacement parts.
10º |
.........The chain saw kickback angle |
|
is 10 , with a chain stop. |
|
......... Correct Direction of Cutting-Teeth. |
|
......... |
|
Chain Stop |
SAFETY INSTRUCTIONS cont.
SERVICE SAFETY
1.If any part of this Chain Saw is missing or should break, bend, or fail in
any way; or should any electrical component fail to perform properly: SHUT OFF the power switch and remove the power cord from the Chain Saw and have the missing, damaged or failed parts replaced BEFORE resuming operation.
2.Tool service should be performed at a qualified service dealer or repair center. Service or maintenance performed by unqualified personnel could result in a risk of injury.
3.When servicing a tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
SAFETY RULES FOR ELECTRIC CHAIN SAWS
1.KNOW your electric Chain Saw. Read operator’s manual carefully. Learn the applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire or serious injury.
2.DO NOT use the Chain Saw without adequate lighting. ALWAYS make sure that you can see what you are cutting.
3.Use Chain Saw ONLY when wood is dry.
4.ALWAYS stand to the left of the Handle. Any debris thrown by the Chain Saw would be coming from the Blade Guard area on the right of the Chain Saw.
5.ALWAYS remove objects such as sticks and debris from the cutting path that could become entangled in, or thrown by the Chain Saw.
6.DO NOT start cutting until you have a clear work area, secure footing, especially if you are felling a tree, a retreat path. Keep work area clean.
7.DO NOT operate with one hand. Serious injury to the operator, helpers, or bystanders may result from one handed operation. A pole saw/chain saw is intended for two-handed use.
8.DO NOT operate chain saw from a ladder or in a tree.
9.MAKE SURE the chain will not make contact with any object while starting the saw. NEVER start the saw when the guide bar is in a cut.
10.DO NOT force chain saw. It will do the job better and safer at the rate for which it was intended.
11.DO NOT put pressure on the saw, especially at the end of the cut. Doing so can cause you to lose control when the cut is completed.
12.STOP the saw before setting it down.
13.Carry the chain saw by the front handle with the chain saw switched off and away from your body. When transporting or storing the chain saw always fit the guide bar cover. Proper handling of the chain saw will reduce the likelihood of accidental contact with the moving saw chain.
14.Use the right tool, CUT WOOD ONLY. Don't use chain saw for purpose not intended;
for example, don't use chain saw for cutting plastic, masonry, non-wood building materials.
15.DO NOT operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Always replace bar, chain, hand guard, or other parts immediately if they become damaged, broken, or are otherwise removed.
16.Tool service should be performed at a Sears Parts and Repair Center or other qualified service dealer. Service or maintenance performed by unqualified personnel could result in a risk of injury.
17.Keep all parts of the body away from the saw chain when the chain saw is operating. Before you start the chain saw, make sure the saw chain is not contacting anything.
A moment of inattention while operating chain saws may cause entanglement of your
clothing or body with the saw chain.
8
SAFETY INSTRUCTIONS cont. |
SAFETY RULES FOR ELECTRIC |
|
CHAIN SAWS cont. |
|
18.Always hold the chain saw with your right hand on the rear handle and your left hand on the front handle. Holding the chain saw with a reversed hand configuration increases the risk of personal injury and should never be done.
19.Hold the power tool by insulated gripping surfaces only, because the saw chain may contact hidden wiring or its own cord. Saw chains contacting a “live wire” may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
20.Have all chain saw service performed by a qualified service dealer or repair center except the items listed in the MAINTENANCE section of this manual.
21.MAKE CERTAIN saw chain stops moving when trigger switch is released.
22.KEEP the handles dry and clean and free from oil and grease.
23.KEEP oil cap and fasteners securely tightened.
24.Nonconforming replacement components or the removal of safety devices may cause
damage to the unit and possible injury to the operator or bystanders. Use only Craftsman accessories and replacement parts as recommended. Never modify your saw.
25.MAINTAIN chain saw with care.
26.KEEP unit sharp and clean for better and safer performance.
27.FOLLOW INSTRUCTIONS for lubricating and changing accessories.
28.UNPLUG the chain saw from the power source when not in use, before servicing, and when changing accessories and attachments, such as saw chain and guard.
29.CHECK FOR DAMAGED PARTS. Before further use of the pole saw/chain saw, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. CHECK for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by a qualified service dealer or repair center unless otherwise indicated elsewhere in the operator's manual.
30.WHEN NOT IN USE, chain saws should be stored in a dry, high or locked-up place out of the reach of children.
31.WHEN STORING CHAIN SAW, unplug and use a bar sheath or carrying case.
! WARNING: NEVER reach under the Chain Saw (chain area) until you have unplugged Chain Saw and the Chain has come to a complete stop.
The Chain Saw’s chain will continue to rotate for a few seconds after it is switched off.
ADDITIONAL RULES FOR SAFE OPERATION
! WARNING: BE SURE to read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
1.ALWAYS wear safety goggles or safety glasses with side shields, and a full-face shield when using this Chain Saw. We recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side-shield, available at Sears Stores or other Craftsman Outlets.
2.PROTECT your lungs. Wear a face mask, dust mask or respirator if the operation is dusty.
3.PROTECT your hearing. Wear appropriate personal hearing protection during use. Under some conditions noise from this product may contribute to hearing loss.
9
SAFETY INSTRUCTIONS cont. |
ADDITIONAL RULES |
|
FOR SAFE OPERATION cont. |
|
4.Wear safety glasses and hearing protection. Further protective equipment for head, hands, legs and feet is recommended. Adequate protective clothing will reduce personal injury by flying debris or accidental contact with the saw chain.
5.ALL VISITORS AND BYSTANDERS MUST wear the same safety equipment that the operator of the tool wears.
6.ALWAYS check the tool for damaged parts. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine if it will operate properly and perform its intended function. A guard or other part that is damaged should be properly repaired or replaced at a qualified service dealer or repair center service dealer.
7.Always keep proper footing and operate the chain saw only when standing on fixed, secure and level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of the chain saw.
8.Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance.
9.Follow instructions for lubricating, chain tensioning and changing accessories.
Improperly tensioned or lubricated chain may either break or increase the chance for kickback.
10.Only use replacement bars and chains specified by the manufacturer.
Incorrect replacement bars and chains may cause chain breakage and/or kickback.
11.Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased kickback.
! WARNING: Follow all safety rules to help prevent Kickback which can cause serious personal injury.
AVOID KICKBACK AND PULL-IN |
|
KICKBACK |
Avoid |
|
Obstructions |
|
Clear The |
Kickback Path |
Work Area |
|
1.KICKBACK is the backward, upward or sudden forward motion of the guide bar occurring when the saw chain near the upper tip of the guide bar contacts any object such as a log or branch, or when the wood closes in and pinches chain in the cut. Contacting a foreign object in the wood can also result in loss of chain saw control.
2.ROTATIONAL KICKBACK can occur when the moving chain contacts an object at the upper tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back toward the operator.
3.PINCH-KICKBACK can occur when the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.
10
SAFETY INSTRUCTIONS cont. |
ADDITIONAL RULES |
|
FOR SAFE OPERATION cont. |
||
|
AVOID KICKBACK AND PULL-IN cont.
4.PULL-IN can occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.
CAUSES AND OPERATOR PREVENTION OF KICKBACK:
•Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.
•Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator.
•Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.
•Either of these reactions may cause you to lose control of the saw which could result in serious personal injury.
•Do not rely exclusively upon the safety devices built into your saw.
•As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.
•Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below:
-Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both hands on the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can be controlled by the operator, if proper precautions are taken.
-Do not let go of the chain saw.
-Do not overreach and do not cut above shoulder height.
This helps prevent unintended tip contact and enables better control of the chain saw in unexpected situations.
AVOID PINCH-KICKBACK
1.Be extremely aware of situations or obstructions that can cause material to pinch the top of or otherwise stop the chain.
2.Do not cut more than one log at a time.
3.Do not twist the saw as the bar is withdrawn from an undercut when bucking.
AVOID PULL-IN
1.Always begin cutting with the saw at full speed and the saw housing against wood.
2.Use wedges made of plastic or wood. Never use metal to hold the cut open.
! WARNING: Follow all safety rules to help prevent Kickback which can cause serious personal injury.
11
Loading...