CDIDI CD4584A, CD4584, CD4583A, CD4583, CD4582A Datasheet

	• 1N4565A THRU 1N4584A AVAILABLE IN		JANHC AND JANKC	CD4565
	PER MIL-PRF-19500/452			thru
	• ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE
				CD4584A
	• 6.4 VOLT ZENER VOLTAGE +		5%

•ELECTRICALLY EQUIVALENT TO 1N4565 THRU 1N4584A

•COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES, WITH THE EXCEPTION OF SOLDER RELOW

MAXIMUM RATINGS

Operating Temperature: -65°C to +175°C

Storage Temperature: -65°C to +175°C

REVERSE LEAKAGE CURRENT
lR = 2	A @ 25°C & V					R	= 3 Vdc
ELECTRICAL CHARACTERISTICS									@ 25°C, unless otherwise specified.
					ZENER				EFFECTIVE	VOLTAGE	TEMPERATURE		MAXIMUM
	TYPE				TEST			TEMPERATURE			TEMPERATURE		RANGE	ZENER
	NUMBER			CURRENT			COEFFICIENT		STABILITY		∆ V ZT MAX		IMPEDANCE
	6.4V +		5%		l	ZT								Z	ZT
											-55° to + 100°
											(Note 2)			(Note 1)
						mA			%/°C		mV		°C	OHMS
	CD4565					.5			.01		48		0 to + 75°C	200
	CD4565A					.5			.01		100		-55 to + 100°C	200
	CD4566					.5			.005		24		0 to + 75°C	200					Backside is not cathode and
	CD4566A					.5			.005		50		-55 to + 100°C	200
	CD4567					.5			.002		10		0 to + 75°C	200					must be electrically isolated.
	CD4567A					.5			.002		20		-55 to + 100°C	200
	CD4568					.5			.001		5		0 to + 75°C	200					T =		Metallization Test Pad
	CD4568A					.5			.001		10		-55 to + 100°C	200
	CD4569					.5			.0005		2.5		0 to + 75°C	200
	CD4569A					.5			.0005		5		-55 to + 100°C	200
	CD4570					1.0			.01		48		0 to + 75°C	100
	CD4570A					1.0			.01		100		-55 to + 100°C	100			DESIGN		DATA
	CD4571					1.0			.005		24		0 to + 75°C	100
	CD4571A					1.0			.005		50		-55 to + 100°C	100
	CD4572					1.0			.002		10		0 to + 75°C	100			METALLIZATION:
	CD4572A					1.0			.002		20		-55 to + 100°C	100
	CD4573					1.0			.001		5		0 to + 75°C	100			Top:		C	(Cat				hode) ...................Al
	CD4573A					1.0			.001		10		-55 to + 100°C	100						A	(Anode)			...................... Al
	CD4574					1.0			.0005		2.5		0 to + 75°C	100			Back:		.......................................Au
	CD4574A					1.0			.0005		5		-55 to + 100°C	100
	CD4575					2.0			.01		48		0 to + 75°C	50			AL	THICKNESS						.........25,000 Å Min
	CD4575A					2.0			.01		100		-55 to + 100°C	50
	CD4576					2.0			.005		24		0 to + 75°C	50
	CD4576A					2.0			.005		50		-55 to + 100°C	50			GOLD	THICKNESS						......4,000Å Min
	CD4577					2.0			.002		10		0 to + 75°C	50
	CD4577A					2.0			.002		20		-55 to + 100°C	50			CHIP	THICKNESS						. ..............10 Mils
	CD4578					2.0			.001		5		0 to + 75°C	50
	CD4578A					2.0			.001		10		-55 to + 100°C	50
	CD4579					2.0			.0005		2.5		0 to + 75°C	50			CIRCUIT LAYOUT DATA:
	CD4579A					2.0			.0005		5		-55 to + 100°C	50			Backside must be electrically
	CD4580					4.0			.01		48		0 to + 75°C	25
																	isolated.
	CD4580A					4.0			.01		100		-55 to + 100°C	25
	CD4581					4.0			.005		24		0 to + 75°C	25			Backside is not cathode.
	CD4581A					4.0			.005		50		-55 to + 100°C	25			For Zener			operation cathode must
	CD4582					4.0			.002		10		0 to + 75°C	25
																	be operated positive with respect
	CD4582A					4.0			.002		20		-55 to + 100°C	25
																	to anode.
	CD4583					4.0			.001		5		0 to + 75°C	25
	CD4583A					4.0			.001		10		-55 to + 100°C	25
	CD4584					4.0			.0005		2.5		0 to + 75°C	25			TOLERANCES:							ALL
	CD4584A					4.0			.0005		5		-55 to + 100°C	25
																	Dimensions		+					2 mils
.	NOTE 1			Zener impedance is derived by superimposing on l									ZT A 60Hz rms a.c. current
					equal to 10% of l				ZT.

NOTE 2 The maximum allowable change observed over the entire temperature range i.e.,the diode voltage will not exceed the specified mV at any discrete temperature between the established limits, per JEDEC standard No.5.

22 MILS

22 COREY STREET, MELROSE, MASSACHUSETTS 02176

PHONE [phone]	FAX [phone]
WEBSITE: http://www.cdi-diodes.com	E-mail: [e-mail]